Manta BOSS 36, BOSS 36 FI User Manual

BOSS 36 - BOSS 36 FI

Descaling pump for boilers, heat
exchangers, cooling systems, pla­stic press moulding machines, eva­porative towers, wall-mounted and
floor-standing boilers.

COD. 300601008
FI - COD. 300601007

TECHNICAL FEATURES

TANK 36 l 36 l
MAX FLOW RATE 48 l/min 68 l/min
CONNECTIONS 3/4" 3/4"

MOTO R 230 V/50 Hz/0,29 kW 230 V/50 Hz/0,29 kW

PRESSURE 1,5 bar 1,6 bar
DEGREE OF PROTECTION IP 55 IP 55
WEIGHT 11 kg 11 kg
MAX TEMPERATURE 60° C 60° C
DIMENSIONS H: 630 mm

PACKAGING FEATURES

NUMBER OF PIECES PER BOX
N. OF PCS PER EPAL PALLET
BOX DIMENSIONS
EPAL PALLET DIMENSI ON S
PRODUCT WEIGHT
BOX WEIGHT
EPAL WEIGHT
CUSTOMS CODE *
BARCODE EAN 13

*Data updated in May 2016

Boss 36 FI Boss 36

L: 350 mm
P: 350 mm

Boss 36 FI Boss 36

1 pc 1 pc

18 18

H: 67 L: 37 P: 37,5 cm H: 67 L: 37 P: 37,5 cm

80x120x214 cm 80x120x214 cm

11 kg 11 kg

12,5 kg 12,5 kg

245 kg 245 kg

8413.82.00 8413.82.00

8054633849774 8054633849767

H: 630 mm

L: 350 mm

P: 350 mm

ADVANTAGES

• Acid resistant material

• Operates up to 60 °C and up to 70 °C on

request

• Self-protection against damage caused by

dry running

• Hose clips/handles

• Suitable for small and medium heat

exchangers

• Wheels are optional if required

• Easy removable tank

BENEFITS

• Restores the optimal heat exchange

• Reduces energy consumption and lower bills

• Extends the heating sustem’s life

MAIN FEATURES

Descaling pu

the most suitable device for the descale of wall­hung boilers, boilers, water heaters and coils
obstructed by limestone. It is characterized by
an excellent manageability, high prevalence and
flow rate, safety of use and easy maintenance to
guarantee the highest results and speed of in­tervention. It is completely made with anti-acid
material, except for the motor with vertical axis,
properly protected with an anti-acid shrinkable
membrane. The motor is assembled on a strong
lid on the tank closure, completely unscrewing
and removable, to guarantee an extremely easy
maintenance. Equipped with Flow Inverter (FI)
that guarantees to the descaling liquid to alter­natively act at both side of the circuit. The use
of descaling products with inhibitors, created by
Manta Ecologica S.r.l. assure a fast intervention
and the maximum safety for heating systems
and workers.

mps BO

SS 36 and BOSS 36 FI

are

For the correct functioning of the pump use exclusively chemical products of BP descaling line.

is suggested for a long duration of the device to not leave any acid products inside the tank, once
the cleaning process is over, and to let circulate for few minutes the neutralizing solution Neutral
Liquid or Neutral Powder, in order to eliminate acid debris present inside the system.

It

APPLICATION AND USE

Descaling pump for boil­ers, heat exchangers,
plastic press moulding
machines, wall-mounted
and floor standing boil­ers. Boss 36 and Boss
36 FI, have as accessory
a gasket and a screwing
cap ACID TANK 36 code
300610008 where the ready-to-use acid solution, could be prepared. This guarantees to have al­ways available the pump for the neutralizing solution, so maximum safety and protection of the
pump and of the system that has to be descaled. Thanks to the possibility of unscrewing and screw­ing the pump in 10” and without any tools, Manta is the only manufacturing company, that guaran­tees to be in the working place with both acid solution and neutralizing solution ready for the rapid use.

WHAT DO I NEED TO INSTALL IT

• Flexible pipes for an easier connection

• Nipples

• Connections

• Typical plumber ‘tool for connections of different type.

INSTALLAZIONE

CORRECT INSTALLATION

1. Control, as first thing (if it is possible)

if inside the device that has to be des­caled, there is enough space to guaran­tee the passage for the acid solution on
the contrary, the operation is not possible.

2. Disconnect the outlet and inlet of the de-

vice to descale, if it is possible, drain it from
the internal water and then connect it to the
pump, through the use of equipped pipes.

3. Remove the tank cap and add cold wa-

ter up to half tank (please notice that
operational temperature during des­caling must never exceed 60 °C).

CORRETTA

4. Turn the pump on with the switch and start

adding slowly the descaling chemical, un-

til required concentration is obtained.
This operation guarantees the correct acid
product blending. Please carefully follow use
and safety information reported on the la­bel of product. Anyway, maximum operation­al time (continuously) of the motor, should
not exceed 2 hours. Please after 2 hours,
let the system rest for at least half an hour.
ATTENTION: on all version equipped with
Flow Inverter (FI) the acid solution flow can
be inverted acting on the external control