Manor 3200, 3205, 3250, 3251, 3252 User Instructions

STOVES

USER’S INSTRUCTIONS

3200 - Winchester Stove
3205 – York Stove
3250 – Cornwall Stove
3251 – Dartmoor Stove
3252 – Cambridge Stove
3253 – Sherwood Stove
3260 – Canterbury Stove
3262 – Chartwell
3264 – Chalfont
3265 – Truro

PLEASE READ THESE USER’S INSTRUCTIONS CAREFULLY WHEN YOU
ASSEMBLE, INSTALL, OPERATE, AND MAINTAIN YOUR STOVE! IN CASE OF
QUESTIONS, PLEASE CONTACT YOUR RETAILER.

EN13240:2001

Importer:

Manor Reproductions Ltd.

Unit C, Hanbury Road, Stoke Prior,

Bromsgrove, Worcestershire, B60 4AE

The user’s instructions are suitable for Manor Stoves listed
below. Please see the following chart information, and select
your model:

Models

Specification

of cast iron

Nominal

Heat output

Recommended

fuels

Weight

Dimension

(H*D*W)

3253

grey iron 18#

12 kW

Solid mineral

fuels,

peat briquettes,

wood, multifuel

130kg

710*470*570(mm)

3205

grey iron 18#

7 kW

Same above

81kg

605*320*460(mm)

3250

grey iron 18#

5kW

Same above

65kg

550*310*430(mm)

3251

grey iron 18#

6kW

Same above

76kg

590*360*470 (mm)

3260

grey iron 18#

8 kW

Same above

93kg

610*460*465(mm)

BSV09-2

3200

grey iron 18#

6kW

Same above

71kg

600*380*430 (mm)
BSV09-3

grey iron 18#

4.5kW

Same above

62kg

535*320*400(mm)

BSV804

grey iron 18#

14kW

Same above

170kg

730*470*730 (mm)

BSV805

3254

grey iron 18#

12Kw

Same above

130kg

680*420*580(mm)

3252

grey iron 18#

7 kW

Same above

80 kg

650*380*460(mm)

ASSEMBLY

Please assemble your stove according to the following instructions. Please exercise care
at all stages due to the weight and fragility of the product and components.

↓

↓

↓

→ Stoves come to you packaged in a plywood
crate. Remove the strap bands.

→ Remove the crate and take out all the
component parts from within the stove.

→ Unbolt and remove the protective plywood panel
on the bottom of the stove. Take care at this stage.

↓

↓

In order for the Stove to operate efficiently it is essential for the Stove to be assembled
correctly. If you have any concerns, please contact your installer or retailer.

Warning
When assembling the appliance, care should be taken to avoid the possibility of injury.
Any unauthorized modification of the appliance is prohibited.

INSTALLATION

→ fix the legs with set screws and washers

supplied.
Do not over-tighten bolts.

→ the baffle should be already fitted – if loose

install to rear top chamber of stove. Fit the front
retainer bar, and ash pan as shown.

→ fix the flue collar with set screws and washers
supplied to the rear or top of the flue as required.