Mannhart 4822 Specifications
Item # _____________________________________
R
Quantity ___________________________________
C.S.I. Section 11400
4822
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
STANDARD FEATURES
■ 120/60/1
■ 11⁄2 H.P. Motor
■ 12-20 Lbs. per Minute Capacity
■ Ideal for “On Demand” Meat Chopping for
Processing Fresh, Boned Meat
■ Can Be Fed at a Rapid Pace with Continuous
Chopping Action and No Crushing or Mashing of
the Meat
■ All Parts Which Contact Food are Easily Accessible and Readily Removable for
Convenient Cleaning Without the Use of Tools
■ 6 ft. Flexible Cord and Plug
OPTIONS
MEAT CHOPPER
MODEL
❑ 4822 – Meat Chopper
Specifications, Details and Dimensions on Back.
❑ 240/60/1
❑ 208-240/60/3
❑ 480/60/3
4822
4822 MEAT CHOPPER
4822 with Optional Funnel Shaped Cylinder
F-7515 – 4822 Meat Chopper Page 1 of 2
Printed On Recycled Paper
4822
MEAT CHOPPER
SPECIFICATIONS
MOTOR: 11⁄2 H.P. designed expressly for this unit, has grease-
packed ball bearings. Protected by machine enclosure,
ventilation is provided through openings in the base covered by
perforated metal screens (
capacitor-start, capacitor-run, induction type. Three phase is
poly-phase, induction type. See standard electrical specifications
shown below. Not available in D.C.
SWITCH
: Conveniently mounted at back of machine (can be
changed to front).
CORD AND PLUG: A 6 foot, flexible cord and plug for grounding
is furnished for 60 Hz, single and three-phase machines.
A 3-wire I.E.C. cord is furnished on 50 Hz. single-phase.
TRANSMISSION:
Precision made gears and shafts mounted on
ball bearings are fully enclosed in the transmission case, packed
with a special oil at the factory. Smooth, quiet operation is
assured for years of normal operation.
The attachment hub has a double seal, designed to exclude meat
juices or water from the transmission. Worm speed is 212 r.p.m.
CHOPPING END: 4822 has a Hobart protective type chopping
end, with cylinder of the spiral-fluted design. FS option has a
guarded open bowl type chopping end. A heavy cast aluminum
1
⁄16" diameter holes). Single phase is
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
safety guard is supported by vertical posts permanently mounted
on the cylinder. The cylinder, worm and adjusting ring are all
heavily tinned. A heat-treated steel knife and plate and plastic
feed stomper.
FEED PAN
1
x 2
— 33" x 15
CAPACITY
through a
first cutting through a
FINISH
: 4822 has a stainless steel feed pan — 191⁄2" x 111⁄2"
⁄2" inside dimensions. FS option has stainless steel pan
3
⁄4" x 33⁄4" inside dimensions.
: 4822 will grind 16 lbs. per minute, first cutting
1
⁄8" plate. FS option will grind 20 to 22 lbs. per minute,
1
⁄8" plate.
: Standard finish is stainless steel housing. An attractive
stainless steel trim plate is provided at the attachment opening
and stainless steel legs, cushioned on the bottom with resilient
neoprene rubber, provide clearance to keep the table clean
under the chopping unit.
STANDARD EQUIPMENT
protective type tinned chopping end, stainless steel feed pan,
plastic feed stomper, one knife and one plate. The plate has
: Includes the working unit with
1
⁄8"
diameter holes.
OPTIONAL EQUIPMENT
: Stay-Sharp knife and plate.
WEIGHT: Net weight, 186 lbs. Approx. shipping weight, 105 lbs.
DETAILS AND DIMENSIONS
WARNING
E L E C TR I CA L A N D G RO UN D IN G
C O N N EC TI ON S MU ST CO MP LY
WI T H A P PLI C AB L E PO R TI O NS O F
TH E NAT IO NA L EL EC TRI CA L CO DE
AND/ OR O THER LOCAL ELECT RICAL
CODES.
STANDARD ELECTRICAL
SPECIFICATIONS
60 Hz. 50 Hz.*
1 PH 3 PH 1 PH
208
120
240 230
240
480
*50 Hz. machines not submitted
for UL listing.
As continued product improvement is a policy of Hobart, specifications are subject to change without notice.
6 FT. CORD & PLUG FURNISHED
Page 2 of 2 F-7515 – 4822 Meat Chopper
F-7515 (REV. 6/05) LITHO IN U.S.A. (H-01)
Loading...