Mannhart 1HG85 Specifications

Item # _____________________________________

Quantity ___________________________________

C.S.I. Section 11400

1HG85 SERIES

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

STANDARD FEATURES

■ Stainless steel fry tank, 70 - 85 lb. capacity,
includes limited 10 year tank warranty

■ 11⁄4" full port ball type drain valve

■ Stainless steel front, top, sides and door

■ Set of four casters (two locking)

■ Auto basket lift – single or double for computer

controls only

■ 150,000 BTU/hr. input

■ Five heat exchanger tubes positioned for easy

cleaning

■ High limit control

■ Combination gas shut-off valve, pressure

regulator and pilot ignition system

■ Tank brush, stainless steel crumb scoop and
clean-out rod

GAS FRYERS

MODELS

❏ 1HG85M: Behind the door millivolt thermostat

control adjusts from 200° to 400°F.

❏ 1HG85D: Solid state temperature control

programmable from 200° to 390°F. Completely
programmable with single digital 4 character
display. User selectable fat melt modes.
Automatic and manual select boil out modes.
Electronic ignition.

❏ 1HG85C: Computer control with digital

character display. Completely programmable
with 10 product keys. Adjusts from 200° to
390°F. User selectable fat melt modes.
Automatic and manual select boil out modes.
Programmable Celsius and Fahrenheit
temperature scales. Electronic ignition. Single
auto basket lifts or double auto basket lifts.
Filter ready. Please specify 85HMF-4 (120 V),
when ordering Mobile Filter Unit.

Specifications, Details and Dimensions on Reverse Side.

ACCESSORIES

❏ HGRO15 add-on frymate

❏ Stainless steel tank cover

❏ Grease protector strips

❏ Elevation Kit for altitudes above 3,000 ft.

❏ Set of 61⁄2" stainless steel legs

❏ Flexible gas hose with quick disconnect and

restraining device.

1HG85 SERIES GAS FRYERS

NEED

NEW

PHOTO

1HG85C

F-39775 – 1HG85 Series Gas Fryers Page 1 of 2

Printed On Recycled Paper

1HG85 SERIES
GAS FRYERS

SPECIFICATIONS

CONSTRUCTION:

70 - 85 lb. capacity floor model gas fryer. Stainless steel
front, top, sides and door. Stainless steel fry tank with five
heat exchanger tubes and a “V” shaped cold zone. Set of
four casters (two locking), 11⁄4" full port ball type drain valve.
Twin fry baskets with plastic coated handles.

TANK SIZE:

191⁄2" x 18".

DETAILS AND DIMENSIONS

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

HEATING:

150,000 BTU/hr. input.

WORKING HEIGHT:

361⁄4".

APPROXIMATE SHIPPING WEIGHT:

300 lbs.

Side View

IMPORTANT

1. A combination valve with pressure regulator is provided
with this unit.

Natural Gas 4.0" W.C.
Propane Gas 10.0" W.C.

2. An adequate ventilation system is required for
Commercial Cooking Equipment. Information may
be obtained by writing to the National Fire Protection
Association, Batterymarch Park, Quincy, MA 02269.
When writing refer to NFPA No. 96.

3. All models require a 6" clearance at both sides and rear
adjacent to combustible construction.

4. All models require a 16" minimum clearance to adjacent
open top burner units.

5. This appliance is manufactured for commercial
installation only and is not intended for home use.

SERVICE CONNECTIONS:

P1 1⁄2" rear gas connection (single units).

E1 115 volt cord & plug supplied on HGD and HGC fryers.

MODEL WIDTH DEPTH

1HG85M

1HG85D
1HG85C

*Based on 5 birds cut into 8 pieces

21" 341⁄2" 471⁄8" 361⁄4" 191⁄2" x 18" 150,000 70 - 85 lbs. 64 300 lbs.

As continued product improvement is a policy of Hobart, specifications are subject to change without notice.

OVERALL

HEIGHT

WORKING

HEIGHT

Top View

TANK

SIZE BTU/HR.

FRY

COMP.

CAPACITY

Side View

Front View

NO. OF

CHICKEN

PIECES*

APPROX.
SHIP. WT.

Page 2 of 2 F-39775 – 1HG85 Series Gas Fryers

F-39775 (REV. 10/06) LITHO IN U.S.A. (H-01)