Mannhart 1HG45 Specifications

Item # _____________________________________

Quantity ___________________________________

C.S.I. Section 11400

1HG45 SERIES

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

STANDARD FEATURES

■ Stainless steel fry tank, 45 - 50 lb. capacity,
includes limited 10 year tank warranty

■ 1" full port ball type drain valve

■ Stainless steel front, top, sides and door

■ Set of four casters (two locking)

■ 120,000 BTU/hr. input

■ Four heat exchanger tubes positioned for easy

cleaning

■ High limit control

■ Combination gas shut-off valve, pressure

regulator and pilot ignition system

■ Tank brush, stainless steel crumb scoop and
clean-out rod

GAS FRYERS

MODELS

❏ 1HG45M: Behind the door millivolt thermostat

control adjusts from 200° to 400°F.

❏ 1HG45D: Solid state temperature control

programmable from 200° to 390°F. Completely
programmable with single digital 4 character
display. User selectable fat melt modes.
Automatic and manual select boil out modes.
Electronic ignition.

❏ 1HG45C: Computer control with digital

character display. Completely programmable
with 10 product keys. Adjusts from 200°
to 390°F. User selectable fat melt modes.
Automatic and manual select boil out modes.
Programmable Celsius and Fahrenheit
temperature scales. Electronic ignition.

Specifications, Details and Dimensions on Reverse Side.

ACCESSORIES

❏ HGRO15 add-on frymate

❏ Stainless steel tank cover

❏ Grease protector strips

❏ Elevation Kit for altitudes above 3,000 ft.

❏ Set of 61⁄2" stainless steel legs

❏ Single large basket - 13"w x 131⁄4"d x 51⁄2"h

❏ Set of twin baskets - 61⁄2"w x 131⁄4"d x 6"h

❏ Set of tri-baskets - 41⁄4"w x 131⁄4"d x 51⁄2"h

❏ Flexible gas hose with quick disconnect and

restraining device.

1HG45 SERIES GAS FRYERS

1HG45D

F-39774 – 1HG45 Series Gas Fryers Page 1 of 2

Printed On Recycled Paper

1HG45 SERIES
GAS FRYERS

SPECIFICATIONS

CONSTRUCTION:

45 - 50 lb. capacity floor model gas fryer. Stainless steel
front, top, sides and door. Stainless steel fry tank with four
heat exchanger tubes and a “V” shaped cold zone. Set of
four casters (two locking), 1" full port ball type drain valve.
Twin fry baskets with plastic coated handles.

TANK SIZE:

14" x 14".

DETAILS AND DIMENSIONS

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

HEATING:

120,000 BTU/hr. input.

WORKING HEIGHT:

361⁄4".

APPROXIMATE SHIPPING WEIGHT:

215 lbs.

IMPORTANT

1. A combination valve with pressure regulator is provided
with this unit.

Natural Gas 4.0" W.C.
Propane Gas 10.0" W.C.

2. An adequate ventilation system is required for
Commercial Cooking Equipment. Information may
be obtained by writing to the National Fire Protection
Association, Batterymarch Park, Quincy, MA 02269.
When writing refer to NFPA No. 96.

3. All models require a 6" clearance at both sides and rear
adjacent to combustible construction.

4. All models require a 16" minimum clearance to adjacent
open top burner units.

5. This appliance is manufactured for commercial
installation only and is not intended for home use.

Front View –

HG45M

MODEL WIDTH DEPTH

1HG45M

1HG45D
1HG45C

*Based on 5 birds cut into 8 pieces

151⁄2" 301⁄4" 471⁄8" 361⁄4" 14" x 14" 120,000 45 - 50 lbs. 40 215 lbs.

As continued product improvement is a policy of Hobart, specifications are subject to change without notice.

Front View –

HG45D and HG45C

Side Views – All Models

OVERALL

HEIGHT

WORKING

HEIGHT

SERVICE CONNECTIONS:

P1 1⁄2" rear gas connection (single units).

E1 115 volt cord & plug supplied on HGD and HGC fryers.

TANK

SIZE BTU/HR.

Top View –

HG45M

FRY

COMP.

CAPACITY

CHICKEN

Top View –

HG45D and HG85C

NO. OF

PIECES*

APPROX.
SHIP. WT.

Page 2 of 2 F-39774 – 1HG45 Series Gas Fryers

F-39774 (REV. 10/06) LITHO IN U.S.A. (H-01)