Mannhart 1HG35M Specifications

Item # _____________________________________

Quantity ___________________________________

C.S.I. Section 11400

1HG35M

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

STANDARD FEATURES

■ Stainless steel fry tank, 35 - 40 lb. capacity,
includes limited 10 year tank warranty

■ 1" full port ball type drain valve

■ Stainless steel front, top, sides and door

■ Set of four casters (two locking)

■ 90,000 BTU/hr. input

■ Behind the door millivolt thermostat control

adjusts from 200°F to 400°F

■ Three heat exchanger tubes positioned for easy
cleaning

■ High limit control

■ Combination gas shut-off valve, pressure

regulator and pilot ignition system

■ Tank brush, stainless steel crumb scoop and
clean-out rod

GAS FRYER

MODEL

❏ 1HG35M: Behind the door millivolt thermostat

control adjusts from 200° to 400°F.

Specifications, Details and Dimensions on Reverse Side.

ACCESSORIES

❏ HGRO15 add-on frymate

❏ Stainless steel tank cover

❏ Grease protector strips

❏ Elevation Kit for altitudes above 3,000 ft.

❏ Set of 61⁄2" stainless steel legs

❏ Flexible gas hose with quick disconnect and

restraining device.

1HG35M GAS FRYER

F-39776 – 1HG35M Gas Fryer Page 1 of 2

Printed On Recycled Paper

1HG35M
GAS FRYER

SPECIFICATIONS

CONSTRUCTION:

35 - 40 lb. capacity floor model gas fryer. Stainless steel
front, top, sides and door. Stainless steel fry tank with three
heat exchanger tubes and a “V” shaped cold zone. Set of
four casters (two locking), 1" full port ball type drain valve.
Twin fry baskets with plastic coated handles.

TANK SIZE:

14" x 14".

DETAILS AND DIMENSIONS

Top View

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

HEATING:

90,000 BTU/hr. input.

WORKING HEIGHT:

361⁄4".

APPROXIMATE SHIPPING WEIGHT:

200 lbs.

IMPORTANT

1. A combination valve with pressure regulator is provided
with this unit.

Natural Gas 4.0" W.C.
Propane Gas 10.0" W.C.

2. An adequate ventilation system is required for
Commercial Cooking Equipment. Information may
be obtained by writing to the National Fire Protection
Association, Batterymarch Park, Quincy, MA 02269.
When writing refer to NFPA No. 96.

3. All models require a 6" clearance at both sides and rear
adjacent to combustible construction.

4. All models require a 16" minimum clearance to adjacent
open top burner units.

5. This appliance is manufactured for commercial
installation only and is not intended for home use.

SERVICE CONNECTIONS:

P1 1⁄2" rear gas connection (single units).

Front View

Side Views – All Models

Side Views

FRY

OVERALL

MODEL WIDTH DEPTH

1HG35M 151⁄2" 301⁄4" 471⁄8" 361⁄4" 14" x 14" 90,000 35 - 40 lbs. 24 200 lbs.

*Based on 5 birds cut into 8 pieces

As continued product improvement is a policy of Hobart, specifications are subject to change without notice.

HEIGHT

WORKING

HEIGHT

TANK

SIZE BTU/HR.

COMP.

CAPACITY

NO. OF

CHICKEN

PIECES*

APPROX.
SHIP. WT.

Page 2 of 2 F-39776 – 11HG35M Gas Fryer

F-39776 (REV. 10/06) LITHO IN U.S.A. (H-01)