Man & Machine EasyConnect GPS, USBAR Module Installation Manual

For safety and regulatory information, see page 2 of this guide.

EasyConnect GPS

GPS/USB/Ethernet Module

for Motion

®

C5 and F5 Tablet PCs

Installation and User’s Guide

IMPORTANT: Safety and Regulatory Information

¡ Tu Sitio de Automatización !

Safety and Regulatory information

Operational Ratings of this device is recommended at temperature ranges
of:

 Operational temperature: 5 - 40˚ C
 Non-operational temperature (storage): -20 - 60˚ C
 Operational relative humidity: 20 - 80%
 Non-operational relative humidity (storage): 10 - 90%
 Operational air pressure: 697 - 1060 hPa
 Non-operational air pressure: 187 - 1060 hPa

Product safety information

This device is designed to optimize safety, minimize strain, and withstand the
rigors of portability. However, to further reduce the risk of personal injury or
damage to the unit, certain precautions should be observed.
 Do not operate this device near water, for example, near a bathtub, kitchen
sink or laundry tub, in a wet basement, by a swimming pool, or in the rain. This
device oered by Man & Machine, Inc. is not designed to be to be water
resistant nor water tight.
 Do not connect or disconnect any cables or perform maintenance or
reconguration of this product during an electrical storm.
 Avoid using the wired LAN during an electrical storm, as a remote risk of
electrical shock from lightning exists.

Comfort and Health

HEALTH WARNING: Long term use of any electronic device may be
linked to serious injuries or disorders. For further information, visit the
My Clinic website at www.myoclinic.org. You may help prevent the
occasional discomfort in your hands, arms, shoulders, neck, and other parts of
your body by:

 Taking frequent breaks to stretch and change your working position.
 Resting your hands and wrists frequently so they have time to recover from

repetitive movements. Use a wrist pad.
 DO NOT IGNORE THESE WARNING SIGNS. PROMPTLY SEE A QUALIFIED
HEALTH PROFESSIONAL.

United States - Federal Communications Commission Notice

Electromagnetic Interference (EMI) is any electromagnetic disturbance
that interrupts, obstructs, or otherwise degrades or limits the eective
performance of electronics or electrical equipment. These emissions can
potentially disrupt, degrade, or otherwise interfere with authorized electronic
emissions, which may include television, AM/FM broadcasts, cellular services,
radar, air-trac control, and pagers.

 Class A is for business or industrial environments.
 Class B is for residential environments.

This device complies with Part 15 of the Federal Communications Commission
(FCC) Rules. Operation is subject to the following two conditions:

 This device may not cause harmful interference.
 This device must accept any interference received, including interference

that may cause undesired operation.
Class A Equipment: This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a residential environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual,
may cause interference with radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which
case you will be required to correct the interference at your own expense.
Class B Equipment: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a residential environment. This
equipment generates, uses, and can radiate radio frequency energy and, if

notinstalled and used in accordance with the manufacturer’s instruction manual,
may cause interference with radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, you are
encouraged to try to correct the interference by one or more of the following
measures:

 Reorient or relocate the receiving antenna
 Increase the separation between the equipment and the receiver
 Connect the equipment into an outlet on a circuit dierent from that to

which the receiver is connected
 Consult the dealer or an experienced radio/television technician
for help
This device meets the following Technical and Safety Standards for the United
States:
 FCC Part 15 Subpart B, Class B - Limits and Methods of Measurement of
Radio Interference Characteristics of Information Technology
 UL. 60950-1 - Safety of Information Technology Equipment
The following information is provided on the device or devices covered in this
document in compliance with FCC regulations:

 Model Number: USBAR Module
 Company name: Man & Machine, Inc.
 Address: 3706 West Street
 State: Landover, MD 20785
 Phone: [phone]

IC Notice (Canada Only)
Unintentional Emitter per ICES-003

This device is classied by the Industry Canada as (IC) Interference-Causing
Equipment Standard #3 (ICES-003) as Class B digital devices. This classication is
located on the label on the back of the device. Look for a statement on the label
similar to the following: Canada ICES-003, Class/Classe B.
This Class B (or Class A, if so indicated on the registration label) digital apparatus
meets the requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la Classe B (ou Classe A, si ainsi indiqué sur l’étiquette
d’enregistration) respecte toutes les exigences du Règlement sur le Matériel
Brouilleur du Canada.
This device meets the following Technical and Safety Standards for the Industry
Canada:
 ICES-003, Class/Classe B - Limits and Methods of Measurement of Radio
Interference Characteristics of Information Technology Equipment
 CSA C22.2 No. 60950-1 - Safety of Information Technology Equipment

Conformité Européne (CE) (European Union)
Unintentional Emitter

The (Conformité Européne) symbol found on the device indicates
compliance to the EMC Directive and the Low Voltage Directive of the
European Union.
This means that the device meets the following technical standards:
 EN 55022 (CISPR22) — Limits and Methods of Measurement of Radio
Interference Characteristics of Information Technology Equipment
 EN 55024 (IEC 61000 4-2, 4-3, 4-3, 4-5, 4-6, 4-8, 4-11) — Information
Technology Equipment-Immunity Characteristics - Limits and Methods of
Measurement
 EN 61000 3-2 (IEC 61000 3-2) — Electromagnetic compatibility (EMC) - Part 3:
Limits - Section 2: Limitations for harmonic current emissions (Equipment input
current up to and including 16 A per phase)
 EN 61000 3-3 (IEC 61000 3-3) — Electromagnetic compatibility (EMC) - Part 3:
Limits - Section 3: Limitations of voltage uctuations and icker in low-voltage

supply systems for equipment with rated current up to and including 16 A
 IEC/EN 60950-1 — Safety of Information Technology Equipment

Australia Radio Communications (C-Tick) Statement

The C-Tick symbol found on the device indicates compliance to the
technical and safety standards set forth by the Australian Communica
tions and Media Authority (ACMA).

This symbol indicates the device meets compliance to the technical and safety
standards set forth by the Australian Communications and Media Authority
(ACMA).

This device meets the following Technical and Safety Standards for the
Australian / New Zealand regions:
 AS/NZS 3548 Class B - Limits and Methods of Measurement of Radio
Interference Characteristics of Information Technology Equipment
 AS/NZS 60950-1 – Safety of Information Technology and Electronic Business
Machines
 CISPR 22 – Limits and Methods of Measurement of Radio Interference
Characteristics of Information Technology Equipment
 CISPR 24 – Limits and Methods of Measurement Characteristics of
Information Technology Equipment

Canada ICES-003, Class/Classe B

Page 2

¡ Tu Sitio de Automatización !