ManiWay Electronics MW-1585 Owner's Manual

ManiWay

Owner's Manual

22..11CCHH SSoouunndd bbaassee wwiitthh BBuuiilltt--iinn SSuubbwwooooffeerr

PLEASE READ BEFORE OPERATING THIS EQUIPMENT.

Model No.: MW-1585

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacture’s
instructions.

8. Do not install near any heat source such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus .

11. Only use attachments/accessories specified by the manufacturer.

12. Unplug the apparatus during lightning storms or when unused for long periods of time.

13. Refer all serving to qualified personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.

14. Battery

1).CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.

2).

Warning: DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD.

- This This product contains a coin/button cell battery. If the coin/button cell battery is
swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

- Keep new and used batteries away from children. If the battery compartment does not
close securely, stop using the product and keep it away from children.

- If you think batteries might have been swallowed or placed inside any part of the body,
seek immediate medical attention.

15. This equipment is a Class II or double insulated electrical appliance. It has been
designed in such a way that it does not require a safety connection to electrical earth.

Warning

This appliance is not intended for use by persons (including children) with reduced physical
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for

their safety. Children should be supervised to ensure that they do not play with the
appliance.

1. To prevent possible hearing damage, do not listen at high volume levels
for long time periods respectively a sudden high volume level.

2. Never use the device unsupervised! Switch off the device whenever you are not using it,
even if this only for a short while.

3. The appliance is not intended to be operated by means of an external timer or separate
remote control system.

4. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.

5. Before operating this system, check the voltage of this system to see if it is identical to the
voltage of your local power supply.

6. The unit should not be impeded by covering the ventilation opening with items such as
newspaper, table-cloths, curtains etc. Make sure that there are at least 20 cm of space
above and at least 5 cm of space on each side of the unit.

7. The apparatus must not be exposed to dripping or splashing and that objects filled with
liquids, such as vases, must not be placed on the apparatus.

8. To prevent fire or shock hazard, do not expose this equipment to hot places, rain,
moisture or dust.

9. Do not locate this unit near any water sources e.g. taps, bathtubs, washing machines or
swimming pools. Ensure that you place the unit on a dry, stable surface.

10. Do not place this unit close to a strong magnetic field.

11. Do not place the unit on a amplifier or receiver.

12. Do not place this unit in a damp area as the moisture will affect the life of electric
components.

13. If the system is brought directly from a cold to a warm location, or is placed in a very
damp room, moisture may condense on the lens inside the player. If this occurs, the system
will not operate properly. Please leave the system turned on for about an hour until the
moisture evaporates.

14. Do not attempt to clean the unit with chemical solvents as this might damage the finish.
Wipe with a clean, dry or slightly damp cloth.

15. When removing the power plug from the wall outlet, always pull directly on the plug,
never pull on the cord.

16. The mains plug is used as the disconnect device, the disconnect device must remain
readily operable.

CAUTION

To reduce the risk of electric shock, do not dismantle the product and do not expose the
apparatus to rain or moisture. No user-serviceable parts inside. Refer servicing to qualified
personnel only.

Explanation of Graphical Symbols:

The lightning flash within an equilateral triangle is intended to alert you to
the presence of un-insulated dangerous voltage within the product's
enclosure that may be of sufficient magnitude to constitute an electric
shock to a person or persons.

The exclamation point within an equilateral triangle is intended to alert you
to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.

To achieve the utmost in enjoyment and performance, and in order to
become familiar with its features, please read this manual carefully before attempting to
operate this product. This will assure you years of trouble free performance and listening
pleasure.

Important Notes

This safety and operating instruction should be retained for future reference.
The apparatus should not be exposed to dripping or splashing or placed in a humid
atmosphere such as a bathroom.
Do not install the product in the following areas:
Places exposed to direct sunlight or close to radiators.
On top of other stereo equipment that radiate too much heat.
Blocking ventilation or in a dusty area.
Areas where there is constant vibration.
Humid or moist places.
Do not place near candles or other naked flames.
Operate the product only as instructed in this manual.
Before turning on the power for the first time, make sure the power adaptor is properly
connected.
For safety reasons, do not remove any covers or attempt to gain access to the inside of the
product. Refer any servicing to qualified personnel.
Do not attempt to remove any screws, or open the casing of the unit; there are no user
serviceable parts inside. Refer all servicing to qualified service personnel.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:

(1) this device may not cause harmful interference.
(2) this device must accept any interference received, including interference that may

cause undesired operation.

NOTE : This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

-Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment

IDENTIFYING THE PARTS

Top View

1. LED Display window

-Showing working modes including HDMI1, HDMI2, ARC (HDMI OUT), Bluetooth, Optical,

Coaxial, Aux-in, USB .

2. “ – “ Button

-Press to decrease the volume level.

3. “ + ” Button

-Press to increase the volume level.

4. “ ” Button

-Press to choose music mode.