This manual is updated as new information and models are released.
Visit our website for the latest manual. www.manitowocfsg.com
America’s #1 Selling Ice Machine
Part Number 000001130 1/09
Safety Notices
! Warning
!
Caution
Important
!
Caution
Important
! Warning
!
Warning
As you work on Manitowoc equipment, be sure to pay
close attention to the safety notices in this manual.
Disregarding the notices may lead to serious injury and/
or damage to the equipment.
Throughout this manual, you will see the following types
of safety notices:
Text in a Warning box alerts you to a potential
personal injury situation. Be sure to read the
Warning statement before proceeding, and work
carefully.
Text in a Caution box alerts you to a situation in
which you could damage the equipment. Be sure to
read the Caution statement before proc eeding, and
work carefully.
Procedural Notices
As you work on Manitowoc equipment, be sure to read
the procedural notices in this manual. These notices
supply helpful information which may assist you as you
work.
Throughout this manual, you will see the following types
of procedural notices:
Read These Before Proceeding:
Proper installation, care and maintenance are
essential for maximum performance and troublefree operation of your Manitow oc equipment. Read
and understand this manual. It contains valuable
care and maintenance information. If you encounter
problems not covered by this manual, do not
proceed, contact Manitowoc Foodservice Group.
We will be happy to provide assistance.
Routine adjustments and maintenance procedures
outlined in this manual are not covered by the
warranty.
PERSONAL INJURY POTENTIAL
Do not operate equipment that has been misused,
abused, neglected, damaged, or altered/modified
from that of original manufactured specifications.
PERSONAL INJURY POTENTIAL
Children must be supervised to insure they do not
play with this appliance..
Text in an Important box provides you with
information that may help you perform a procedure
more efficiently. Disregarding this information will
not cause damage or injury, but it may slow you
down as you work.
NOTE: Text set off as a Note provides you with simple,
but useful, extra information about th e pr oce dur e yo u
are performing.
We reserve the right to make product improvements at any time.
Specifications and design are subject to change without notice.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision concerning use of the appliance by a
person responsible for their safety.
Self-Contained
Water-Cooled
Accessories
Contact your Manitowoc distributor for these optional
accessories:
BIN CASTER
Replaces standard legs.
ARCTIC PURE WATER FILTER SYSTEM
Engineered specifically for Manitowoc ice machines,
Arctic Pure water filters are an efficient, dependable, and
affordable method of inhibiting scale formation, filtering
sediment, and removing chlorine taste and odor.
MANITOWOC CLEANER AND SANITIZER
Manitowoc Ice Machine Cleaner and Sanitizer are
available in convenient 16 oz. (473 ml) and 1 g al (3.7 8 l)
bottles. These are the only cleaner and sanitizer
approved for use with Manitowoc products.
NOTE: The Manitowoc Automatic Cleaning System
(AUCS®) accessory can not be used with models Q130,
Q210 or Q270 ice machines.
Q130, Q210 and Q270 model ice machines do not have
a water curtain covering the evapor ator. The ice damper
performs the functions of the water curtain see Sectio n 4
for details.
Part Number 000001130 1/091-1
General InformationSection 1
MODEL/SERIAL PLATE
LOCATION
MODEL/SERIAL PLATE
LOCATION
Model/Serial Number Location
Record the model and serial number of your ice machine
in the space provided below. These numbers are
required
when requesting information from your local
Manitowoc distributor, service represen tative, or
The model and serial number are listed on the OWNER
WARRANTY REGISTRATION CARD. They are also
listed on the MODEL/SERIAL NUMBER DECAL affixed
to the ice machine.
Manitowoc Ice, Inc.
Q130/Q210 MODELSQ270 MODELS
1-2
Ice Machine
Model Number
Serial Number
Model/Serial Number Location
Part Number 000001130 1/09
Section 1General Information
Important
Owner Warranty Registration Card
General
The packet containing this manual also includes
warranty information. Warranty coverage beg ins the day
your new ice machine is installed.
Complete and mail the OWNER WARRANTY
REGISTRATION CARD as soon as possible to
validate the installation date.
If you do not return your OWNER WARRANTY
REGISTRATION CARD, Manitowoc will use the date of
sale to the Manitowoc Distributor as the first day of
warranty coverage for your new ice machine.
COMMERCIAL WARRANTY COVERAGE
General
The following Warranty outline is provided for your
convenience. For a detailed explanation , re ad the
warranty bond shipped with each product.
Contact your local Manitowoc representative or
Manitowoc Ice, Inc. if you need further warranty
information.
Parts
1. Manitowoc warrants the ice machine against defects
in materials and workmanship, under normal use
and service for three (3) years from the date of
original installation.
2. The evaporator and compressor are covered by an
additional two (2) year (five years total) warranty
beginning on the date of the original installation.
Labor
1. Labor required to repair or replace defective
components is covered for three (3) years from the
date of original installation.
2. The evaporator is covered by an additional two (2)
year (five years total) labor warranty beginning on
the date of the original installation.
Exclusions
The following items are not included in the ice machine’s
warranty coverage:
1. Normal maintenance, adjustments and cleaning as
outlined in this manual.
2. Repairs due to unauthorized modifications to the ice
machine or use of non-standard parts without prior
written approval from Manitowoc Ice, Inc.
3. Damage caused by improper installation of the ice
machine, electrical supply , water supp ly or drainage,
or damage caused by floods, storms, or other acts of
God.
4. Premium labor rates due to holidays, overtime, etc.;
travel time; flat rate service call charges; mileag e
and miscellaneous tools and material charges not
listed on the payment schedule. Additional labor
charges resulting from the inaccessibility of
equipment are also excluded.
5. Parts or assemblies subjected to misuse, abuse,
neglect or accidents.
6. Damage or problems caused by installation,
cleaning and/or maintenance procedures
inconsistent with the technical instructions provided
in this manual.
Authorized Warranty Service
To comply with the provisions of the warranty, a
refrigeration service company, qualified and authorized
by your Manitowoc distributor, or a Contracted Service
Representative must perform the warranty repair.
NOTE: If the dealer you purchased the ice machine from
is not authorized to perform warranty service, contact
your Manitowoc distributor or Manitowoc Ice, Inc. for the
name of the nearest authorized service representative.
Service Calls
Normal maintenance, adjustments and cleaning as
outlined in this manual are not covered by the warranty.
If you have followed the procedures listed in this manual,
and the ice machine still does not perform properly, call
your authorized service company.
Part Number 000001130 1/091-3
General InformationSection 1
RESIDENTIAL WARRANTY COVERAGE
WHAT DOES THIS LIMITED WARRANTY COVER?
Subject to the exclusions and limitations below,
Manitowoc Ice, Inc. (“Manitowoc”) warrants to the
original consumer that any new ice machine
manufactured by Manitowoc (the “Product” ) shall be free
of defects in material or workmanship for the warranty
period outlined below under normal use and
maintenance, and upon proper installation and start-up
in accordance with the instruction manual supplied with
the Product.
HOW LONG DOES THIS LIMITED WARRANTY
LAST?
Ice Machine - Twelve (12) months from the sale date
WHO IS COVERED BY THIS LIMITED WARRANTY?
This limited warranty only applies to the original
consumer of the Product and is not transferable.
WHAT ARE MANITOWOC ICE’S OBLIGATIONS
UNDER THIS LIMITED WARRANTY?
If a defect arises and Manitowoc receives a valid
warranty claim prior to the expiration of the warranty
period, Manitowoc shall, at its option: (1) repair the
Product at Manitowoc’s cost, including standard straight
time labor charges, (2) replace the Product with one that
is new or at least as functionally equivalent as the
original, or (3) refund the purchase price for the Pr oduct.
Replacement parts are warranted for 90 days or the
balance of the original warranty period, whiche ve r is
longer. The foregoing constitutes Manitowoc’s sole
obligation and the consumer’s exclusive remedy for any
breach of this limited warranty. Manitowoc’s liability
under this limited warranty is limited to the purchase
price of Product. Additional expenses including, without
limitation, service travel time, overtime or premium labor
charges, accessing or removing the Product, or shipping
are the responsibility of the consumer.
HOW TO OBTAIN WARRANTY SERVICE
To obtain warranty service or information rega rding yo ur
Product, please contact us at:
MANITOWOC FOODSERVICE
2110 So. 26
P.O. Box 1720,
Manitowoc, WI 54221-1720
Telephone: 920-682-0161 Fax: 920-683-7585
www.manitowocice.com
th
St.,
WHAT IS NOT COVERED?
This limited warranty does not cover, and you are solely
responsible for the costs of: (1) periodic or routine
maintenance, (2) repair or replacement of the Product or
parts due to normal wear and tear, (3) defects or
damage to the Product or parts resulting from misuse,
abuse, neglect, or accidents, (4) defects or damage to
the Product or parts resulting from improper or
unauthorized alterations, modifications, or changes; and
(5) defects or damage to any Product that has not been
installed and/or maintained in accordance with the
instruction manual or technical instructions provided by
Manitowoc. To the extent that warranty exclusions are
not permitted under some state laws, these exclusions
may not apply to you.
EXCEPT AS STATED IN THE FOLLOWING
SENTENCE, THIS LIMITED WARRANTY IS THE SOLE
AND EXCLUSIVE WARRANTY OF MANITOWOC
WITH REGARD TO THE PRODUCT. ALL IMPLIED
WARRANTIES ARE STRICTLY LIMITED TO THE
DURATION OF THE LIMITED WARRANTY
APPLICABLE TO THE PRODUCTS AS STATED
ABOVE, INCLUDING BUT NOT LIMITED TO, ANY
WARRANTY OF MERCHANT ABILITY OR OF FITNESS
FOR A PARTICULAR PURPOSE. Some states do not
allow limitations on how long an implied warranty lasts,
so the above limitation may not apply to you.
IN NO EVENT SHALL MANITOWOC OR ANY OF ITS
AFFILIATES BE LIABLE TO THE CONSUMER OR ANY
OTHER PERSON FOR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY
KIND (INCLUDING, WITHOUT LIMITATION, LOSS OF
PROFITS, REVENUE OR BUSINESS) ARISING FROM
OR IN ANY MANNER CONNECTED WITH THE
PRODUCT, ANY BREACH OF THIS LIMITED
WARRANTY, OR ANY OTHER CAUSE WHA TSOEVER,
WHETHER BASED ON CONTRACT, TORT OR ANY
OTHER THEORY OF LIABILITY. Some states do not
allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or
exclusion may not apply to you.
HOW STATE LAW APPLIES
This limited warranty gives you specific legal rights, and
you may also have rights that vary from state to state or
from one jurisdiction to another.
REGISTRATION CARD
To secure prompt and continuing warranty service, this
warranty registration card must be completed and sent
to Manitowoc within thirty (30) days from the sale date.
Complete the following registration card and send it to
Manitowoc at the address shown.
1-4
Part Number 000001130 1/09
General
Important
Electrical Entrance
3/8” (0.95 cm) FPT
Ice Making Water Inlet
1/2” (1.27 cm) Minimum FPT
Water Condenser Outlet
(water-cooled units)
3/8” (0.95 cm) FPT Water Condenser Inlet
1/2” (1.27 cm) FPT Bin Drain
26.0” (66 cm)
19.0” (48.3 cm)
32.5”
(82.6 cm)
3.3”
(8.3 cm)
6.0”
(15.25 cm)
10.25”
(26 cm)
15.25”
(38.7 cm)
12.3”
(31.2 cm)
6.5”
(16.5 cm)
26.5” (67.3 cm)
1.25” (3.2 cm)
2.1” (5.4 cm)
28.2" (71.5 cm)
30.0" (76.2 cm)
20.7" (52.6 cm)
6.0"
(15.25 cm)
32.5"
(82.6 cm)
1/2" (1.27 cm) Bin Drain
Electrical Entrance
3/8" (0.95 cm) F.P.T.
Ice Making Water Inlet
1/2" (1.27 cm) F.P.T.
Water Condenser Outlet
(water-cooled units)
1/2" (1.27 cm) F.P.T. Water Condenser Inlet
1.25"
(3.2 cm)
6.8"
(17.4 cm)
11.2"
(28.4 cm)
8.8"
(22.4 cm)
13.5"
(34.2 cm)
12.4"
(31.4 cm)
2.125"
(5.4 cm)
Section 2
Installation Instructions
These instructions are provided to assist the qualified
installer.
Failure to follow these installation guidelines may
affect warranty coverage.
Ice Machine Dimensions
Q130/Q210 ICE MACHINESQ270 ICE MACHINES
Part Number 000001130 12/082-1
Installation InstructionsSection 2
!
Caution
Location of Ice Machine
The location selected for the ice machine must meet the
following criteria. If any of these criteria are not met,
select another location.
•The location must be indoors.
•The location must be free of airborne and other
contaminants.
•The air temperature must be at least 40°F (4.4°C),
but must not exceed 110°F (43.4°C).
•The location must not be near heat-generating
equipment or in direct sunlight.
•The location must be capable of supporting the
weight of the ice machine and a full bin of ice.
•The location must allow enough clearance for water,
drain and electrical connections in the rear of the ic e
machine.
•The location must not obstruct airflow through or
around the ice machine (condenser airflow is in and
out the front). Refer to the chart below for clearance
requirements.
Ice Machine Heat of Rejection
Series
Ice Machine
Q13024002900
Q21024003400
Q27038006000
* B.T.U./Hour
** Because the heat of rejection varies during the ice making cycle, the
figure shown is an average.
Air Conditioning**Peak
Ice machines, like other refrigeration equipment, reject
heat through the condenser. It is helpful to know the
amount of heat rejected by the ice machine when sizing
air conditioning equipment where self-contained aircooled ice machines are installed.
Heat of Rejection*
Self-Contained
Air-Cooled
Top/Sides5” (203 mm)*5” (127 mm)*
Back5” (127 mm)*5” (127 mm)*
Self-Contained
Water-Cooled
NOTE: The ice machine may be built into a cabinet.
There is no minimum clearance requirement for the top
or left and right sides of the ice machine. The listed
values are recommended for efficient operation and
servicing only.
The ice machine must be protected if it will be
subjected to temperatures below 32°F (0°C).
Failure caused by exposure to freezing
temperatures is not covered by the warranty. See
“Removal from Service/Winterization” Section 4.
2-2
Part Number 000001130 12/08
Section 2Installation Instructions
!
Caution
THREAD LEVELING
LEG INTO BASE OF
CABINET
Leveling the Ice Machine
1. Screw the lev elin g leg s on to the bott om of th e ice
machine.
2. Screw the foot of each leg in as far as possible.
The legs must be screwed in tightly to prevent
them from bending.
3. Move the ice machine into its final position.
4. Level the ice machine to assure that the siphon
system functions correctly. Use a level on top of the
ice machine. Turn each foot as necessary to level
the ice machine from front to back and side to side.
NOTE: An optional 2 ½" caster assembly is available for
use in place of the legs on the Q130, Q210 and Q270.
Installation instructions are supplied with the casters.
Checking Ice Machine Level
Part Number 000001130 12/082-3
Installation InstructionsSection 2
!
Warning
!
Warning
!
Warning
Electrical Service
GENERAL
All wiring must conform to local, state and national
codes.
VOLTAGE
The maximum allowable voltage variation is ± 10% of
the rated voltage on the ice machine model/serial
number plate at start-up (when the electrical load is
highest).
The 115/1/60 ice machines are factory pre-wired with a
8’ power cord, and NEMA 5-15P-plug configuration.
The 208-230/1/60 and 230/50/1 ice machines are
factory pre-wired with a 8’ power cord only, no plug is
supplied.
FUSE/CIRCUIT BREAKER
A separate fuse/circuit breaker must be provided for
each ice machine. Circuit breakers must be H.A.C.R.
rated (does not apply in Canada).
The ice machine must be grounded in accordance
with national and local electrical codes.
TOTAL CIRCUIT AMPACITY
The total circuit ampacity is used to help select the wire
size of the electrical supply.
The wire size (or gauge) is also dependent upon
location, materials used, length of run, etc., so it must be
determined by a qualified electrician.
GROUND FAULT CIRCUIT INTERUPTER
Ground Fault Circuit Interrupter (GFCI/GFI) protection is
a system that shuts down the electric circuit (opens it)
when it senses an unexpected loss of power,
presumably to ground. Manitowoc Ice, Inc. does not
recommend the use of a GFCI/GFI circuit protection with
our equipment. If code requires the us e of a GF CI /G FI
then you must follow the local code. The circuit must be
dedicated, sized properly and there must be a panel
GFCI/GFI breaker. We do not recommend GFCI/GFI
outlets as they are known for more intermittent n uisance
trips than panel breakers.
PERSONAL INJURY POTENTIAL
If the supply cord is damaged, do not operate the
equipment until the cord is replaced by a service
agent or similarly qualified person..
Q130/Q210/Q270 ICE MACHINE
Voltage
Ice Machine
Q130
Q210
Q270
Danfoss
Compressor
Q270
Tecumseh
Compressor
Phase
Cycle
115/1/60157.0156.3
208-230/1/60153.1152.6
230/1/50153.0152.5
115/1/60156.5156.1
208-230/1/60153.6153.1
230/1/50153.6153.1
1 15/1/601510.7159.9
208-230/1/60155.2154.7
230/1/50155.2154.7
115/1/60158.5157.7
208-230/1/60154.5154.0
230/1/50154.5154.0
Air-CooledWater Cooled
Maximum Fuse/
Circuit Breaker
Total Amps
Maximum Fuse/
Circuit Breaker
Total Amps
2-4
Part Number 000001130 12/08
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.