Manitowoc Ice 1500-030 Service Manual

1500-030 & 1500-031

Transfer Valve

1500-030 & 1500-031 Transfer Valve

Bag-In-Box Bag-In-Box

Hose Length: 1 foot (305 mm)

Minimum

3 feet (914 mm)

Maximum

CO

2

Pump

Electric

Pump

Out

In

Label

Indicates
Which BIB
Is On Line

BIB 1 BIB 2

To Pump

PRODUCT WARRANTY

Flojet warrants this product to be free of defects in material and/or workmanship for
a period of one year after purchase by the customer from Flojet. During this one year
warranty period, Flojet will at its option, at no charge to the customer, repair or
replace this product if found defective, with a new or reconditioned product, but not
to include costs of removal or installation. No product will be accepted for return
without a return material authorization number.All return goods must be shipped with
transportation charges prepaid. This is only a summary of our Limited Warranty. For
a copy of our complete warranty, please request Form No. 100-101.

© Copyright 2001, ITT Industries Printed in U.S.A. All Rights Reserved Form: 81000-058 11/01

UNITED KINGDOM
Flojet, Unit 1, Avant Business Centre
Denbigh West Industrial Estate
Milton Keynes, Bucks, England MK1 1DL
Tel: [phone]
Fax: [phone]

U.S.A.
Flojet
20 Icon
Foothill Ranch, CA 92610-3000
Tel: [phone]
Fax: [phone]

MOUNTING

The Transfer Valve should be located between the bag­in-box cartons with enough hose length for easy bag
connector installation & removal. Fixed mounting is not
required, however, two holes are provided in the base
for mounting on rack or wall if desired. Use only #4
sheet metal screws (m3 screws) or plastic screws.

Maximum thread penetration 3/8” (9.5mm).

HOSE CONNECTIONS

Connect outlet hose from bag-in-box connectors to
Transfer Valve barbed ports 1 & 2. Hose should be
clamped with stepless or closed Oetiker clamp or
equivalent. Make sure there are no bulges or gaps at the
clamp that may cause air leaks into the syrup lines.
(Prevent damage to hose). Connect hose from Transfer
Valve to pump using the same process. See above for
recommended installation.

OPERATION

The FLOJET Model 1500 Transfer Valve is fully
automatic requiring no operator involvement. To
manually operate, simply pull up or push down on the
cap. Locate the cap to position that indicates which
bag-in-box is on line.

SERVICE INSTRUCTIONS

Field repairs are NOT recommended. Return the
Transfer Valve to the factory for warranty consideration.

Recommended installation for C0

2

Pumps or

Electric Pumps

INSTALLATION & SERVICE INFORMATION

Locate Transfer Valve
Close To Bag -In-Box

STANDARD MODELS

Number Operating Vacuum inches (mm) Hg.

1500-030 17” ± 2” (432 mm ± 51 mm)

(Recommended for CO

2

Pumps that can

draw 20” Hg. (508 mm) min. vacuum)

1500-031 14” ± 2” (356 mm ± 51 mm)

(Recommended for Electric Pumps that
can draw 15” Hg. (381 mm) min. vacuum)