Manitowoc Ice 1312-xxx-E Installation Manual

operator manual

Countertop Conveyor Oven

This document includes:

• Safety Notices

• Specifi cations

• Installation Instructions

• Operating Instructions

• Cleaning Instructions

• Warranty Statement

P/N: 2810088
Revision: D

Series 1300

Lincoln Foodservice Products, LLC

Technical Support Hotline: [phone]

1111 North Hadley Road

Fort Wayne, Indiana 46804

United States of America

Telephone: [phone]

www.lincolnfp.com

IMPORTANT WARNING AND SAFETY INFORMATION

This manual contains important safety and installation-operation instructions. Require

NOTE:

DANGER:

all operators to read this manual thoroughly before installing, operating or servicing this
equipment. Improper installation, adjustment, alteration, service or maintenance can cause
property damage, injury or death.

Do not work around conveyor belt with long hair, loose clothing, or dangling jewelry. Getting
caught in the belt could result in serious injury.

Minimum clearances must be maintained from all walls and combustible materials.•
Keep the oven area free and clear of combustible material.•
Adequate clearance for air openings to the control chamber on both sides of the oven is required.•
Do not obstruct the ventilation holes in the control boxes and covers as these provide cooling air for the controls.•
The oven is to be operated only on the type of electricity as shown on the specifi cation plate.•
This manual should be retained for future reference.•
The electrical wiring diagram is located under the control box covers.•

DANGER:

DANGER:

DANGER:

DANGER:

For your safety, do not store or use gasoline or other fl ammable vapors or liquids in the
vicinity of this or any other appliance.

Do not spray aerosols in the vicinity of this appliance while it is in operation.

If the power supply cord appears to be damaged, do not attempt to operate the unit. Con­tact a service agent or qualifi ed electrician to repair!

Do not use parchment paper when placing food product through the appliance! Use of such
materials may cause a fi re and should never be placed in the appliance.

2

PURCHASER’S RESPONSIBILITY

It is the responsibility of the purchaser to:

See that the electric services for the oven are installed on site in accordance with the manufacturers specifi cations.1.
Unload, uncrate, and install the oven in its proper location in accordance with this operator manual.2.
See that the electric services are connected properly by a qualifi ed installer of your choice. All such connections 3.
must be in accordance with applicable code requirements. See “Code References” section for more information.

TABLE OF CONTENTS

WARNINGS AND SAFETY INFORMATION...................................... 2

PURCHASER’S RESPONSIBILITY................................................... 3

UTILITY SPECIFICATION - ELECTRIC............................................ 4

EXTERIOR DIMENSIONS................................................................. 4

ELECTRICAL GROUNDING INSTRUCTIONS.................................. 5

ELECTRICAL CODE REFERENCES................................................ 5

SPACING........................................................................................... 5

VENTILATION GUIDELINES............................................................. 5

GENERAL INFORMATION................................................................ 5

UNCRATING...................................................................................... 5

ASSEMBLY INSTRUCTIONS............................................................ 6

STACKING INSTRUCTIONS............................................................. 7

MOUNTING INSTRUCTIONS............................................................ 7

OVEN START-UP AND SHUTDOWN................................................ 8

CLEANING INSTRUCTIONS............................................................. 8

PREVENTIVE MAINTENANCE......................................................... 9

HOW TO OBTAIN SERVICE.............................................................. 9

FUNCTIONS...................................................................................... 9

CONVEYOR REMOVAL.................................................................... 9

FINGER REMOVAL AND DISASSEMBLY.......................................... 10

WARRANTY....................................................................................... 11

3

UTILITY SPECIFICATION

MODEL # Input Rate Voltage Amps Hz Phase # of wires

1300 6 200 28 50/60 1 3
1301 6 208 27 60 1 3
1302 6 240 24 60 1 3
1303 6 220 27 50 1 3
1304 6 240 24 50 1 3
1305 6 380/220 15 50 1 4
1306 6 415/240 14 50 1 4
1307 6 200 16 50/60 3 5
1308 6 380/220 9 50 3 5
1309 6 415/240 8 50 3 5
1310 6 220 27 60 1 3
1311 6 380/220 9 60 3 5
1312-xxx-E 6 400/230 9 50 3 5
1313-xxx-E 6 400/230 15 50 1 3

NOTE: Do not install this (these) oven(s) in any area with an ambient temperature in excess of 95o F, 35o C. Doing so will cause damage to unit.

EXTERIOR DIMENSIONS

Top oven shown with conveyor #1353
Bottom oven shown with extended conveyor #1346

4