WATCH TV
Change the channel you are watching by
6
entering the three-digit channel number
using the number buttons on the remote
control. Or, you can press the or
buttons to step through the channels in
order.
Press the
volume up or down. You can turn off the
sound altogether with the
sound comes back on when you press
again.
When subtitles are available for a
programme it is indicated by a
symbol in the browsing bar at the bottom of
the screen when you switch channels (press
‘i’ at anytime whilst watching TV to display
the bar). Press the button to display the
subtitles menu and use the and
buttons to move the orange highlight bar to
“English” if you want to turn on subtitles, or
“Off” to turn off subtitles, and then press
If audio description (a spoken description of
the broadcast) is available for a programme
it is indicated by an symbol in the
browsing bar. To turn on audio description,
press the button to display the available
audio menu and then select “English Audio
Description (MPEG)”.
and
buttons to turn the
button. The
Browse the scheduled programmes using
the and buttons to move through
the channels and the
move the orange highlight bar to show the
programmes showing at different times.
Press
highlighted by the orange bar. If the
programme is on at the time, the receiver
will switch to that channel immediately. If
the programme is scheduled for later on,
a reminder is set. When the programme is
about to start, a message is displayed on
screen and, after a few seconds, the receiver
automatically switches to the necessary
channel.
When you have fi nished with the programme
guide, return to normal TV viewing by
pressing .
.
to switch to the programme
and buttons to
Standby - switches the
receiver on and off.
Mute - silences the
receiver’s sound.
0, 1 … 9 - buttons to
directly select channels and
enter numeric value in the set-up
menus.
Switches back to the last
channel watched.
Displays your favourites
lists.
Displays the main menu
screen.
Displays channel and
programme information.
Digital text and interactive services are
available from some Freesat channels, and
you can use them by following the on-screen
prompts and pressing
while watching the channel. This displays a
menu of services available from that channel
or broadcaster.
or the button
move the highlight bar in menus
and in the programme guide, and
allow you to browse the channels
and programmes.
Up, down, left, right -
Plaza HD • S2 Remote Control
Exits a menu and returns
to the main menu.
Exits a menu and returns
to normal TV viewing.
Switches the TV SCART
output between Freesat and the
TV’s tuner.
Turns the volume up and
down.
Switches to the next or
previous channel. Moves one
page up or down in the channel
list and programme guide.
Displays the available audio
menu to choose between normal
sound and audio description.
Switches between available
screen display modes.
Displays the subtitles menu
to select a subtitle type.
FREE TV
IN
J
UST A
J
IFFY
YOUR QUICK START GUIDE
UNPACK
Unpack and check
1
the contents of your
Manhattan Plaza HD•S2
Freesat receiver pack:
Manhattan
Model: Plaza HD•S2
For assistance, please call
the Manhattan helpline on
020 8450 0005
or visit our website at
www.manhattan-tv.com
Find out more about Freesat
at www.freesat.co.uk
Join in at
community.freesat.co.uk
Follow Freesat on
www.twitter.com/freesat_TV
Like Freesat on
www.facebook.com/freesat
Plaza HD•S2 receiver
You can fi nd out the programmes scheduled
to be shown on all the Freesat channels up
to eight days ahead using the button.
Press the button and then press .
When you have fi nished with the interactive
services, return to normal TV viewing by
pressing
Switch off your receiver by pressing the
button, and press the button again to turn
it on.
.
or
Displays interactive and
Selects the option in a menu.
Displays the channel list.
Displays the programme
guide.
v2.2
digital text services (where
available).
Chooses options within menus.
Quick Start
Guide
Main User
Guide
Batteries for the
remote control
Remote
control
HDMI cable to connect
to an HD-ready TV
CONNECT TO A DISH
SWITCH ON
TUNE IN
2
To receive Freesat you must
connect your Plaza HD•S2 receiver
to an appropriate satellite dish,
fixed in position and accurately
pointed at 28.2° East satellite
position.
For safety reasons and to provide
reliable reception, we strongly
recommend that the dish is
professionally installed. If you have
any questions about the dish, please
consult your installer.
PLUG IN
3
Place your Plaza HD•S2 receiver
on a firm, level surface close to
your television, a mains electricity
socket, and the cable from the
dish.
Connect the cable from your dish
to the LNB IN socket at the back of
the receiver.
Make sure your television is
turned off and connect the HDMI
cable to the HDMI socket on the
rear of the Plaza HD•S2 and to an
HDMI socket on your television.
If you need more guidance, check
your television manual.
Plug the mains power lead from
the back of the receiver into an
available mains socket that is
turned off.
To watch On Demand TV services including BBC iPlayer
and ITV Player, the Plaza HD•S2 must be connected
to your internet router or hub using an ethernet cable
(not supplied). Plug one end of the ethernet cable into
the ETHERNET socket at the back of the Plaza HD•S2,
and the other into your hub or router. Make sure the
connections are fully pushed in - you’ll hear a click
as they lock into place. Consult your router or hub’s
documentation for further guidance.
4
Remove the battery compartment cover
from the back of the Plaza HD•S2 remote
control by lifting it up while pushing the catch.
Insert the two AAA sized batteries as marked
on the inside of the compartment. Replace
the compartment cover.
Turn on your TV set and choose the HDMI
input (see your television manual).
Switch on the mains socket the Plaza HD•S2
is connected to. The power indicator light on
the front will illuminate blue to indicate the
receiver has been turned on successfully.
After a few seconds, step one of the Freesat
installation process will be shown on the
television screen.
If you do not see this screen (pictured
opposite), please refer to the Troubleshooting
section in the main user guide.
Cover catch
5
When the first installation step is displayed,
use the and buttons to select the screen
type of your television (16:9 Widescreen or the
squarer 4:3 Traditional). Press the button
to highlight the HDMI Resolution selection
box, and then use the and buttons to
select the correct resolution for your television
(see your television’s manual for guidance, or
select 720p if unsure).
Press
to display the next installation step.
When the signal lock is successful, press
to proceed to the next step. If the signal lock
fails, please see the Troubleshooting section
in the main user guide.
Enter your postcode, pressing the number
buttons an appropriate number of times
to produce the letters (printed above each
button) and numbers required, in the same
way as ‘texting’ on a mobile phone. You do not
need to enter a space. If you make a mistake,
the
Now press
and again to start the channel scan
Your Plaza HD•S2 receiver will take a couple of
minutes to find and store the Freesat channels
available, displaying the total number of
Freesat TV and radio channels found. Press
the
step.
Enter your choice of PIN (used to unlock
certain channels and functions) by pressing
the required number button (0, 1 … 9) for each
of the four PIN digits. Press
the next step.
Setup is now complete. Your PIN number will
be displayed on-screen along with a reminder
to make a note of it. When ready, press
and enjoy watching Freesat digital TV.
to select “Next” and then press
button deletes the previous character.
once to confirm the postcode
button to display the next installation
.
to proceed to
Loading...