Manhattan Computer Products 179133 User Manual

HI-SPEED
USB 2.0 DVI
CONVERTER

USER
MANUAL

MODEL 179133

MAN-179133-UM-0708-01

INTRODUCTION

Thank you for purchasing the MANHATTAN® Hi-Speed USB 2.0 DVI
Converter, Model 179133.

This handy device helps increase productivity, improve “desktop”
arrangements and extend the visual work area across dual monitors by
making word processing, editing and multi-tasking more effective with
less overlapped windows, fewer hidden palettes and better-organized
views. Read e-mail on one monitor and open attachments on the other;
expand and view large, complicated spreadsheets without scrolling;
make presentations more compelling with another monitor for greater
impact or viewing speaker notes on a separate display.

The convenient Hi-Speed USB 2.0 connection eliminates the need to
install another graphics card or struggle with compatibility issues, making
this converter an ideal portable solution for notebook computers and
desktop systems with graphics cards that lack additional outputs. And
with Plug and Play and hot-swap capabilities, it’s easily installed without
an external power supply on any Windows computer. The easy-to­follow instructions in this user manual make installation of the converter

relatively quick and simple, so you’ll also soon be enjoying the benets

of these additional features:

• Primary, extended, mirror and rotation functions provide display
continuity and dual views

• Supports DVI resolutions up to 1600 x 1200

• Connects to any USB port without conicts or external power supplies

• Lifetime Warranty

System Requirements

• Windows 2000/XP/Vista

• Available Hi-Speed USB 2.0 port

Package Contents

• Hi-Speed USB 2.0 DVI Converter

• USB cable

• Quick install guide; driver CD with user manual*

* Some screen images have been modied to t the format of this manual.

2

INTRODUCTION

Regulatory Statements

FCC

This equipment has been tested and found to comply with FCC rules
Part 15, Subpart B § 15.109/15.107 Class B. Operation is subject to
the following two conditions:

• This device may not cause harmful interference; and

• This device must accept any interference received, including
interference that may cause undesired operation.

CE

This equipment is in compliance with the requirements of the following
regulations: EN 55022 Class B (2006); EN 55024 (1998+A1:2001+
A2:2003); IEC/EN 61000-3-2 (2006); IEC/EN 61000-3-3 (1995+A1
:2001+A2 :2005); (IEC/EN 61000-4-2 (1995+A1 :1998+A2 :2001)/-3
(2006)/-4(2004)/-5(2006)/-6 (1996+A1 :2001)/-11 (2004)

C-Tick

This equipment is in compliance with the requirements of the following
regulations: EN 55022 (2006); AS/NZS CISPR22 © IEC: 2005.EN 55022 (2006); AS/NZS CISPR22 © IEC: 2005.

VCCI

This equipment is in compliance with the requirements of the following
regulation: CISPR22 © IEC: 2005.

Important Pre-Installation Notes

• Unplug any USB 2.0 VGA adapter connected to your PC or notebook
computer before executing the Hi-Speed USB 2.0 DVI Converter
setup or un-installation program.

• An AC power adapter is required for an external USB hub. The driver
allows up to six Hi-Speed USB 2.0 DVI Converters on one PC.

• Connect the display device to the DVI connector of the Hi-Speed
USB 2.0 DVI Converter and switch the display device on before
plugging the converter into an available USB 2.0 port of the PC or
notebook computer.

• Do not reboot the computer until all USB 2.0 DVI Converters are
installed.

INTRODUCTION

3

INSTALLATION: WINDOWS 2000/XP

Driver Installation

Installing the device driver enables your computer’s operating system
to recognize the Hi-Speed USB 2.0 DVI Converter once it’s connected.
Check your operating system and refer to the appropriate installation
procedure to begin installing the device driver. Make sure the converter
is unplugged from your PC or notebook computer before executing the
setup program.

1. Insert the driver CD into the CD-ROM drive. The setup program
should be launched automatically. If the setup program does not
begin automatically, go to Start, then Run, then double-click “D:\
Setup.exe” (where D: is the path of your CD-ROM drive).

2. When the Welcome
screen of the InstallShield
Wizard displays, click
“Next” to continue.

3. When the License
Agreement screen
displays, read it and
select “I accept the terms
of the license agreement.”
Click “Next” to accept the
license agreement and
continue with the install.

4. Connect the external display device (monitor/projector) to the DVI
connector of the converter and switch the display device on.

4

INSTALLATION: WINDOWS 2000/XP

5. With the Complete screen
displayed, click “Finish”
to exit the driver wizard.
Plug the converter into
an available USB 2.0
port of your PC or
notebook computer.

6. If installing a single
converter, select “Yes, I
want to restart my
computer now” and click
“Finish” to complete the
driver installation.
NOTE: If installing more
than one converter,
proceed to Step 7. After
rebooting the computer,
the extended display will
be shown on the second
display device.

7. If installing more than
one converter, select
“No, I will restart my
computer later” and click
“Finish” to continue with
the installation of the
second converter.
Connect the next display
device to the additional
converter’s DVI
connector and switch it
on. Plug this additional
converter into another
USB 2.0 port on the computer; the driver will again proceed to install
automatically. Continue connecting up to six display devices and
converters as instructed above; or select “Yes, I want to restart my
computer now” (as shown in Step 6) and click “Finish.” After each
reboot, the extended display will be shown on the display device.

INSTALLATION: WINDOWS 2000/XP

5

Verifying Driver Installation

Right-click My Computer and go to Properties → Hardware → Device

Manager. Double-click “Display adapters” and “Universal Serial Bus
controllers.”

• For a single Hi-Speed USB 2.0 DVI Converter installation on the

computer, conrm the listings shown below.

6

INSTALLATION: WINDOWS 2000/XP