Manhattan Computer Products 179119 User Manual

HI-SPEED
USB 2.0
SVGA
CONVERTER

USER
MANUAL

MODEL 179119

MAN-179119-UM-0608-01

Thank you for purchasing the MANHATTAN® Hi-Speed USB 2.0 SVGA
Converter, Model 179119.

Designed to help increase productivity, improve desktop arrangements
and extend the visual work area across dual monitors, this device
makes word processing, editing and multi-tasking more effective with
less-overlapped windows, fewer hidden palettes and better-organized
views. Users can read e-mail on one monitor and open attachments
on the other. Large, complicated spreadsheets can be expanded and
viewed without scrolling.

Presentations are made more compelling with another monitor for more
impact or viewing speaker notes on a separate display. The MANHATTAN
Hi-Speed USB 2.0 SVGA Converter supports resolutions of up to 1280
x 1024 in 16-bit or 32-bit color, and its 16 MB SDRAM memory easily
enhances the workspace without complicated installations or expensive
equipment.

The easy-to-follow instructions in this user manual help make setup and

operation relatively simple, so you’ll soon be enjoying the benets of

these additional features:

• Primary, extended and mirror functions provide display continuity and
dual views

• Portable and connects to any USB port without conicts or external

power supplies

• Plug and Play; Windows compatible

• Lifetime Warranty

System Requirements

• Compatible with Windows 2000/XP/Vista and Win CE (with host
device support)

• Available Hi-Speed USB 2.0 port

Package Contents

• Hi-Speed USB 2.0 SVGA Adapter

• Quick install guide and driver CD with user manual

SAFETY & COMPLIANCE STATEMENTS

FCC
This equipment has been tested and found to comply with FCC Part 15
Subpart B § 15.109/15.107 Class B. Operation is subject to the following
two conditions: 1) This device may not cause harmful interference; and

2) this device must accept any interference, including interference that
may cause undesired operation of the device.

2

CE
This equipment is in compliance with the requirements of the following
regulations: EN 55022 Class B (2006); EN 55024 (1998+A1:2001+
A2:2003), (IEC/EN 61000-4-2 [1995+A1:1998+A2:2001)/-3(2006]).

C-Tick
This equipment is in compliance with the requirements of the following
regulations: EN 55022 (2006) Class B, AS/NZS CISPR22 © IEC: 2005.

VCCI
This equipment is in compliance with the requirements of the following
regulations: CISPR22 © IEC: 2005.

DRIVER INSTALLATION

Installing the device driver enables your computer’s operating system
to recognize the Hi-Speed USB 2.0 SVGA Converter once it’s connected.
Check your operating system and refer to the appropriate installation
procedure below to begin installing the device driver. IMPORTANT:

• Unplug
notebook before executing any setup or un-install program.

• Make sure you connect the display device to the VGA (DB15)
connector of the
on before plugging the converter into an available USB 2.0 port on
your PC or notebook.

the Hi-Speed USB 2.0 SVGA Converter from your PC or

Hi-Speed USB 2.0 SVGA Converter

and switch it

WindoWs 2000/XP

1. Insert the enclosed driver CD into the CD-ROM drive. The setup
program should be launched automatically; if not, go to Start, then
Run, and then double-click “D:\Setup.exe” (where D: is the path of
your CD-ROM drive).

2.

When the InstallShield
Wizard welcome screen
displays, click “Next” to
continue.

3

3. When the License
Agreement screen
displays, read it and
select “I accept the
terms of the license
agreement.” Click
“Next” to continue.

4. When the
InstallShield Wizard
Complete screen
displays, select “Yes,
I want to restart my
computer now.”
Click “Finish” to
complete the driver
installation.

5. Connect the external display device (monitor/projector) to the VGA
(DB15) connector of the

Hi-Speed USB 2.0 SVGA Converter

and

switch it on.

6. After rebooting the computer, plug the converter into an available
USB 2.0 port on your PC or notebook. The extended display will be
shown on the second display device.

Verifying Driver Installation (2000/XP)

On the desktop, right-click My Computer → Properties → Hardware →
Device Manager; then double-click “Display adapters” and “Universal
Serial Bus controllers.”

“Universal Serial Bus controllers” should feature:

• “USB 2.0 Graphics Card”
“Display adapters” should feature:

• “USB 2.0 Graphics Card-Extend”

• “USB2.0 Graphics Card-Mirror”

4

Driver Un-Install (2000/XP)

1. On the desktop,
go to Start →
Settings (Classic

start menu) →
Control Panel →

Add or Remove
Programs.

2. Select “USB 2.0
Graphics Card
(Trigger) (driver
version number)”

and click
“

Remove.”

5