Manhattan Comfort 9GMC4 User Manual
Assembly Guide
1000010414 - 13/03/2019
Model: 9GMC1 / 9GMC2 / 9GMC3 / 9GMC4
Tall Cabinet
Stuck? Questions? We are here to help.
1-888-230-2225
help@manhattancomfort.com
In order to ease the assembly,
you should separate and identify the parts first
Do not place the parts directly onto the floor.
Use a cardboard sheet or a mat to place the
parts, during the separation and assembly.
IMPORTANT
In order to avoid severe or even fatal injuries, follow the
instructions carefully.
*Tools Needed (not supplied)
IDENTIFICATION OF PARTS
DIMENSIONIDENTIFY THE COLOR OF YOUR CABINET
Nº
DESCRIPTION
BLACK MATT WHITE MATT BLUE GRAY MATERIAL LENGTH WIDTH THICKNESS
P1 LEFT SIDE SMART 3000009160 3000009313 3000009263 -
P2 RIGHT SIDE SMART 3000009161 3000009314 3000009265 -
P3 CEILING 1 DOOR SMART 3000009414 3000009412 3000009408 -
P4 REAR 1 DOOR SMART 3000009154 3000009308 3000009267 -
P5 SHELF SMART 3000009151 3000009317 3000009268 -
P6 BACK 1 DDOR SMART 3000009164 3000009320 3000009269 -
P7 DOOR RIGHT SMART 3000009318 3000009353 3000009270 3000009157
P8 FRAME SMART FRONT 3000009172 3000009309 3000009272 -
P9 FRAME SMART REAR 3000009174 3000009311 3000009274 -
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
STEEL
QUANTITY
1 PC 25.19'' 13.74'' 0.62''
1 PC 25.19'' 13.74'' 0.62''
1 PC 13.70'' 13.62'' 0.59''
1 PC 13.70'' 13.38'' 1.33''
1 PC 13.74'' 12.79'' 0.62''
1 PC 24.01 12.40'' 0.62''
1 PC 23.70'' 12.24'' 0.62''
1 PC 13.74'' 8.74'' 0.59''
1 PC 13.74'' 8.74'' 0.59''
L W
H
ASSEMBLED PRODUCT:
H: 29.92'' W:13.77'' L:13.77''
Lbs
Maximum weight
supported distributed
P1
P7
P8
P5
P3
P4
P6
22 Lbs
22 Lbs
22 Lbs
P2
P9
F1
1000008297
Qty. 2
F5
1000010136
Hardware list
F2
1000008616
Qty. 2
F6
1000008285
1000009033
3000009645 - WHITE
3000009643 - BLACK
3000009649 - BLUE
3000009647 - GREY
F3
Qty. 1
F7
F4
1000000281 - WHITE
1000007352 - BLACK
1000010221 - BLUE
Qty. 2
F8
1000008285
Qty. 1
Qty. 2
Qty. 1
Qty. 1
1 - Identify the parts as figure below:
P8 with hole and P9 without hole.
P9
P8
P8
1 - Attach the P9 part on the P1 and P2 parts in
the indicated direction.
2 - Then attachthe P8 part on the P1 and P2 parts.
P1
P2
01
01
P9
1 - Check the alignment of the holes
on the fitted parts.
2 - The hole in the horizontal bar
of part P8, should be up.
P2
P1
P8
01
02
4x
F3
1 - With the end of F3, smash the safety claw,
locking part P8 and P9 to part P1 and P2.
P1
P8
P2
01
03
P9
Loading...