Manhattan Comfort 8GMC4 User Manual

Assembly Guide

1000010415 - 13/03/2019

Model: 8GMC1 / 8GMC2 / 8GMC3 / 8GMC4

Nightstand

Stuck? Questions? We are here to help.

1-888-230-2225

help@manhattancomfort.com

In order to ease the assembly, you should separate and identify the parts first

Do not place the parts directly onto the floor. Use a cardboard sheet or a mat to place the parts, during the separation and assembly.

IMPORTANT

In order to avoid severe or even fatal injuries, follow the

instructions carefully.

*Tools Needed (not supplied)

IDENTIFICATION OF PARTS

IDENTIFY THE COLOR OF YOUR CABINET

DIMENSÃO

N°

LEFT SIDE SMART

P1

RIGHT SIDE SMART

P2

CEILING 1DOOR SMART

P3

REAR 1 DOOR SMART

P4

BACK 1 DOOR SMART

P5

DOOR RIGHT SMART

P6

FRAME SMART FRONT

P7

FRAME SMART REAR

P8

DESCRIPTION

BLACK MATT

3000009189

3000009202

3000009180

3000009154

3000009197

3000009326

3000009172

3000009174

WHITE MATT

3000009322

3000009323

3000009306

3000009308

3000009325

3000009355

3000009309

3000009311

BLUE MATT

3000009279

3000009280

3000009277

3000009267

3000009281

3000009282

3000009272

3000009274

GREY

-

3000009192

-

MATERIAL

STEEL

QUANTITY

1 PC 13.77''

11PC

PC

1 PC

LENGTH WIDTH THICKNESS

13.77''

13.70''

12.40''

13.77''

13.74''

13.77''

13.62''

13.38''

12.16''

12.91''

8.74''

0.66''

0.90''

1.29''

0,66''

0.62''

0.59''

L

H

ASSEMBLED PRODUCT:

H: 20.07'' W:13.77'' L:13.77''

W

22 LBs

P3

P1

P5

P4

22 LBs

Lbs

F1

1000008297

P6

Maximum weight supported distributed

Hardware list

F2

1000008616

P7

F3

1000009033

P2

P8

F4

1000000281 - WHITE

1000007352 - BLACK

1000010221 - BLUE

Qty. 2

F5

1000010136

Qty. 1

Qty. 2

F6

1000008285

Qty. 2

Qty. 1

F7

3000009645 - WHITE 3000009643 - BLACK

3000009649 - BLUE 3000009647 - GREY

Qty. 1

Qty. 2

F8

1000008285

Qty. 1

1 - Identify the parts as figure below:

P7 with hole and P8 without hole.

P8

P7

1 - Attach the P8 part on the P1 and P2 parts in the indicated direction. 2 - Then attachthe P7 part on the P1 and P2 parts.

P1

P2

01

P8

1 - Check the alignment of the holes on the fitted parts. 2 - The hole in the horizontal bar of part P7, should be up.

01

02

4x

P7

1 - With the F3 end, smash the safety grappel, locking the P7 and P8 part to the P1 and P2 part.

F3

P1

P2

P7

01

03

P8