For assistance,
call us on 020 8450 0005
or visit manhattan-tv.com/support
Check Freeview HD coverage
in your area by visiting
freeview.co.uk
INSTALLING YOUR T1
Unpack the following from your Giftbox:
Remote control
Manhattan T1
2x AAA batteries
HDMI cable Power adapter
You’ll need:
• A TV with an HDMI input
• A coaxial aerial cable
Before you plug in, please read the Safety section of the Important
Information booklet.
2
Connect Up
• Take the coaxial cable from your aerial wall socket and connect it to your T1.
• Next, connect the T1 to your TV using the HDMI cable provided.
• To view Freeview’s free and premium streaming channels or receive software
updates over the internet, connect the T1 to your router using an Ethernet cable.
• Finally, plug the AC power adapter into a wall socket that is turned o, then
connect the other end to the T1.
If you want to use your TV’s tuner, connect the Loop Out connector to the Aerial input of
your TV. See the back cover for details of using Loop Out in Standby.
If your TV doesn’t have an HDMI input, the T1 has an analogue AV output that you should
be able to connect to your TV using the Manhattan T1 AV Kit (not supplied). See the
included leaflet or contact us for more details.
Switch On
• Remove the battery compartment cover from the back of the remote by pushing
the catch. Insert the batteries, matching the + and – symbols to what is marked on
the inside of the compartment.
• Turn on the wall socket you connected the Manhattan T1 to and it will switch on.
• Turn on your TV set and choose the HDMI input you connected your Manhattan
T1 to. Most TV remotes use a button labelled ‘AV’, ‘SOURCE’, ‘INPUT’ or , with
each press cycling through your inputs.
Follow the on-screen instructions to set up your T1. It takes about 5 minutes, which is
the perfect amount of time to read the rest of this Guide!
3
WATCHING TV
20:15
FAVOURITES
102 BBC TWO HD
CLOSE INFO
Oceans: Coastal Path:
Now & Next Browser
The T1 makes it easy to browse what’s on whilst watching full screen TV. Press to
display the Now & Next Browser for the current channel then press or to
browse other channels.
• To watch programmes on now and change channel, press
• To set a reminder for programmes on next, press to highlight it and press
(see 7. Reminders)
• To view detailed info about a highlighted programme, press
Quickly Changing Channel
There are 3 ways to directly change channel whilst watching TV:
1. Press or to change to the channel above or below
2. Enter a channel number with the number buttons
3. Press to change to the last channel you were watching
Volume & Accessibility
Turn the volume up or down with or . To mute and unmute the sound
altogether, press
Toggle Subtitles and Audio Description on and o with the and buttons.
4
Loading...