Page 1
MAN-700511-UM-0407-02
HI-SPEED USB 2.0
eSATA, 3.5”
EXTERNAL
ENCLOSURE
USER MANUAL
MODEL 700511
Page 2
2
Thank you for purchasing the MANHATTAN® eSATA, 3.5” External Enclosure, Model 700511.
Fully SATA-capable and equipped with SATA L-type internal and eSATA I-type external data ports,
it quickly transfers data without conversion between SATA-enabled systems. Hi-Speed USB 2.0
connections offer convenient and versatile data storage, transfer and recovery solutions. Plus:
• Supports data transfer rates for Hi-Speed USB 2.0 up to 480 Mbps and SATA up to 3 Gbps
• Lightweight, compact design ideal for portable storage
• Sturdy aluminum case protects drive and facilitates cooling
• Fits standard 3.5” SATA drives with easy, quick installation and rear-mount power switch
• Windows and Macintosh compatible, Plug and Play, hot swappable
• Lifetime Warranty
Package contents:
• External Enclosure with mounting screws
• eSATA I-type to I-type flat cable, 77 cm (30 in.);
• USB 2.0 A-Type to B-Type cable, 77 cm (30 in.)
• 12 V / 2 Amp power adapter, 1.2 m (4 ft.)
• User manual and driver CD
System requirements:
• eSATA-enabled PC or Macintosh with available eSATA port
• Windows 98SE/Me/2000/XP/Vista or Mac OS 10.x and above
Page 3
3
HARDWARE INSTALLATION
Follow these steps to prepare the device for installation, then see Step 6 of Software Installation.
1. Open the enclosure.
2. Connect the power and
SATA cables to the HDD.
3. Tighten the sides screws
to secure the HDD.
4. Slide the connected hard
disk drive inside the external
enclosure.
5. Replace and tighten the two
retaining screws to secure
the rear panel.
6. Connect the external
cables.
12 V DC in
eSATA
port
USB
port
On/Off
Page 4
4
SOFTWARE INSTALLATION
Windows 98SE Driver Installation (USB port only)
1. Insert the installation CD
in the CD-ROM.
2. Double-click the Setup
icon.
Page 5
5
3. When the Welcome screen
appears, click "Next."
4. When the "Ready to install"
screen appears, click
"Install."
Page 6
6
5. When
prompted,
select "Yes,
restart the
computer
now"; then
click "Finish."
6. Connect the
External
Enclosure with
hard disk
drive to the
USB port of
the computer.
Page 7
7
7. A new Removable
Disk icon will
appear in the My
Computer window
for formatting the
hard disk drive.
Page 8
8
Windows 2000/XP Installation
1. Click on the My
Computer icon,
then click
"Manage"
to initialize
the hard
disk drive.
Page 9
9
2. Click "Disk
Management,"
then click
"Removable
Disk," then
click
"Format."
Page 10
10
3. Confirm that "Removable" and "FAT32"
are entered/selected in the "Volume
label" and "File system" fields,
respectively. Click "OK."
4. When the warning prompt appears,
click "OK."
Page 11
11
5. Click "My Computer" and confirm
that the new "Removable" icon
appears. The External Enclosure
with hard disk drive is now ready
for use.
SPECIFICATIONS
• SATA L-type internal data and power connections
• Hi-Speed USB 2.0 B-Type and eSATA I-type external connections
• Initio Inic1610L chipset
• DC single-post power input (AC adapter included)
• 22 x 14 x 3.5 cm (8.75 x 5.5 x 1.25 in.)
• 448 g (15.8 oz.)
Page 12
www.manhattan-products.com
Are you completely satisfied with this product?
Please contact your MANHATTAN® dealer with comments or questions.
Copyright © MANHATTAN
All products mentioned are trademarks or registered trademarks of their respective owners.
Loading...