DRIVER INSTALLATION
Prior to installing the driver: 
• Close any open software applications on your computer; 
• Disable any anti-virus software and any established rewall; and
• Ensure that the camera is not connected to the computer’s USB port 
  at this time.
Insert the included CD in the computer’s CD-ROM drive. After a few 
seconds, the installation interface will display automatically. 
1. When presented with the rst screen prompt, click “Set Up Driver.” 
2. On the subsequent screen, click “Next” to continue. 
3. When the InstallShield Wizard prompts you with a screen that says 
  the driver installation is complete, click “Finish.”
SOFTWARE
Connect the Pro Cam to your computer’s USB port. 
1. From your program les, go to USB PC Camera Plus (as shown) and 
  click the icon to open the  
  AMCap application. 
2. Go to Options and select 
  Video Capture Filter. 
3. Choose from among the 
  various image settings  
  and display options, then 
  click “Conrm.” NOTE: 
  Trial and error may be 
  the best way to determine 
  some of your preferences.
Digital Video Recording 
To record a continuous-video 
segment, go to AMCap, then 
Capture. Click “OK” to begin 
recording; click “Stop  
Capture” to stop recording. 
44