Page 1
MEGA
CAM
USER
MANUAL
Model 460460
MAN-460460-UM-0808-02
Page 2
Page 3
INTRODUCTION
Thank you for purchasing the MANHATTAN® Mega Cam, Model 460460.
Enhance online communications, instant messaging, blogs and more
by easily capturing and sharing photos and video with this remarkable
little camera! Plug and Play and Windows compatible, it’s ready to go
and easy to use, with included software that simplies settings and
operation.
The easy-to-follow instructions in this manual help make the Mega Cam
setup quick and simple, so you’ll also soon be enjoying the benets of
these additional features:
• Automatic tracking that keeps subjects sharp and in frame without
adjusting camera position
• Self-adjusting color, exposure and brightness levels that maximize
clarity in varying light conditions
• Special video and frame effects that make it fun to personalize images
and online conversations
• High-performance megapixel sensor with powerful 4x digital zoom
function
• Versatile base with clip and swivel magnetic mount
• Lifetime Warranty
NOTE: Some screen images have been modied to t the manual format.
System Requirements
• Windows 2000, XP, Vista, Win7
• PC with USB interface
• Pentium 200 or higher CPU
• CD-ROM drive
• 200 MB free disk space
• 32 MB RAM
Package Contents
• Mega Cam, 1.3 M pixels
• Software CD
• User manual
3 3
Page 4
44
INSTALLATION
Driver
Prior to installing the driver:
• Close any open software applications on your computer;
• Un-install any previously installed camera software or drivers;
• Disable any anti-virus software and any established rewall; and
• Ensure that the camera is not connected to the computer’s USB port
at this time.
With your computer turned on, insert the included CD in the CD-ROM
drive. The installation interface will automatically display.
1. When presented with
the rst InstallShield
Wizard screen
prompt, click “Driver.”
2. On the subsequent
screens, click “Next”
or “Continue Anyway”
to proceed with the
driver installation.
3. When the InstallShield
Wizard prompts you
with a screen saying
the installation is
complete, click “Finish.”
Hardware
1. Connect the Mega Cam to your computer’s USB port.
2. After a few seconds, the computer’s operating system will nd and
recognize the connected Mega Cam, initially displaying a Welcome to
the Found New Hardware Wizard screen. Click “Next.”
3. On subsequent screens, click “Next” or “Continue Anyway” to proceed
with the installation.
4. When the Found New Hardware Wizard prompts you with a screen
that says the software installation is complete, click “Finish.”
Page 5
5
Installation Verication
1. From the desktop, go
to My Computer, then
Properties.
2. Select/click on the
Hardware tab, then
click “Device Manager”
to display your list of
application folders.
3. Conrm that the Mega
Cam (or “USB 2.0 PC
Camera”) le appears
in the Imaging Devices
folder. NOTE: Make
sure the folder doesn’t
have an exclamation
point (!) next to it
(which indicates an
improper installation).
4. From the desktop, go to Control
Panel, then click on Sounds
and Audio Devices.
5. Select/click on the Audio tab.
6. In the Sound Recording panel,
select “USB Camera” from the
Default Device drop-down
menu in order to activate the
Mega Cam’s built-in microphone.
5
USB 2.0 PC Camera
Page 6
666
OPERATION
Quick-Access Controls
In addition to a convenient exterior focus
ring, this Mega Cam features a snapshot
button on the top of the device so you don’t
need to access the software menu to use
this handy feature.
Advanced Settings
To make any changes to the Mega Cam settings (image controls and
modes and such) or to take advantage of the variety of effects (special
effects and frame options), open the AMCap application (which may be
found in your Control Panel settings or on your desktop, depending on
your operating system). For example:
• To stabilize the video (if needed),
go to Options, then to Video
Capture Filter, and select the
Video Proc Amp tab to change
between “50 Hz” and “60 Hz” to
improve your results (see the
screen image on the next page).
• To establish a new location for
storing AVI images, go to File,
then Set Capture.
• To select a video output size,
go to Options, then to Video
Capture Pin (which then displays the Stream Format screen and the
Output Size drop-down menu, among several other Video Format and
Compression options).
Adjustable focus ring
Snapshot button
Clip with swivel
magnetic mount
Page 7
7
Page 8
8
Page 9
FREQUENTLY ASKED QUESTIONS
Q What can be done to rectify a dropped frame or video lag?
A The Mega Cam automatically activates Exposure (displayed on the
Auto Mode Control panel of the Video Proc Amp screen) when lighting
is determined to be insufcient. If continuity or delay problems occur,
deselect the “Auto” option for Exposure.
Q When using MSN, why isn’t my voice heard?
A The built-in microphone probably isn’t activated. Check the “Sounds
and Audio Devices Properties” folder in the Device Manager or Control
Panel and make sure that “USB Camera” is elected as the Default
Device drop-down menu option in the Sound Recording panel. You
can also make sure that your Instant Messenger software is defaulted
to recognize the Mega Cam. Also, conrm that the other IM user has
the same software version and not one that’s incompatible.
Q How do I take 1.3-megapixel snapshots?
A In the AMCAP application, go to Options, then Video Capture Pin to
display the Stream Format screen. In the Output Size eld, select
“640 x 480” (VGA). Then return to Options and go to Video Capture
Filter. In the Image Control panel, set the VGA/SXGA slide bar to
“SXGA” (all the way to the right, which equates to 1280 x 960 pixels).
Q After inserting the installation CD, the autorun program doesn’t
work in Windows Vista or 7. How do I get the camera to install?
A This is an issue involving how these two operating systems handle
the autorun.exe le. To install the software and drivers, you’ll need to
manually open the disk.
1. Right-click the My Computer icon and select “Explore.”
2. Browse the CD drive and right-click the setup program.
3. Select “Run as administrator”; the installation will begin.
4. Follow the prompts to complete the installation.
9
Page 10
SPECIFICATIONS
Standards and Certications
• USB 2.0
General
• CMOS Sonix 201 DSP color sensor; 1.3 M pixels
• Lens: plastic, 6 mm (0.25 in.); 64° angle; manual focus with ring
• Color depth: 24-bit true color
• Image focus: 30 mm to innity; format, MPEG
• Built-in compression ratio (JPG)
• Automatic tracking, color equalizing, exposure and brightness balance
adjustments
• Maximum resolution up to 3200 x 2400 (software enhanced)
• Supports video rates up to 30 fps (640 x 480 resolution, VGA), 10 fps
(1280 x 1024, VGA)
• Built-in microphone with top-mount snapshot button
• Power consumption: 60 mA
Physical
• USB cable, 1.5 m (5 ft.)
• Dimensions: 50 x 50 x 85 mm (2 x 2 x 3.3 in.)
• Weight: 65 g (2.3 oz.)
System Requirements
• Windows 2000, XP, Vista, Win7
• PC with USB interface
• Pentium 200 or higher CPU
• CD-ROM drive
• 200 MB free disk space
• 32 MB RAM
Package Contents
• Mega Cam, 1.3 M pixels
• Software CD
• User manual
10
Page 11
Page 12
Copyright © MA NHATTAN
All products mentioned are trademarks or registered trademarks of their respective owners.
www.manhattan-products.com
MANHATTAN® offers a complete line
of PC Components, Peripherals, Cables and Accessories.
Ask your local computer dealer for more information
or visit us online at
Loading...