SPECIFICATIONS
CONNECTIONS
1. Connect the male (DisplayPort) end of
the converter (right) to the DisplayPort
source device.
2. Connect the female (VGA) end of the
converter (right) to the display unit.
NOTE: Always insert and remove cable
connectors gently to avoid possible
damage to the connectors or the devices.
Standards and Certications
• UL, FCC, CE, DisplayPort 1.1
Contacts
• (1) DisplayPort 20-pin male
• (1) HD 15-pin female
• Nickel plated
General
• Power supply: +3.3 V (from DisplayPort
sourc e)
• Measured power: active, 1.4 W;
standby, 100 mW
• Automatic sink detection (based on
DDC return) and standby mode
• EDID pre-fetch (VGA EDID conversion)
Signal Input/Output
• Single link range, 1920 x 1200, 1080p
(max.)
• Supports VGA video, 1920 x 1200
(max.)
• Analog video output (RGB): 700 mV
swing
• Display resolution up to 1920 x 1200
(WUXGA-R), 60 Hz, 8 bpc; 154 MHz
• Supports up to 10.8 Gbps bandwidth
• Deep Color support, 8-bit and 10-bit
• Auxiliary channel support, 1 Mbps
• 1 lane, 1 direction, 4-line connection
support
• Video amplier bandwidth, 8 bpc /
10 bpc
Operating Frequency
• Frequency, 154 MHz / 144 MHz
• Vertical range, 60 Hz
Environmental
• Temperatures: operating, 0–70°C;
storage, -10–80°C
• Humidity: operating, 10–85% RH (no
condensation); storage, 5–90% RH
(no condensation)
Physical
• Plastic housing
• Length: 116 x 39 x 20.5 mm
(4.5 x 1.5 x 0.8 in.)
• Weight: 40 g (1.4 oz.)
Package Contents
• DisplayPort to VGA Converter
• Quick install guide
MANHATTAN
DisplayPort to VGA
Converter
PC
VGA
cable
Display