HI-SPEED USB 2.0
TO SATA/IDE
ADAPTER
USER MANUAL
Model 179195
MAN-179195-UM-0609-06
Thank you for purchasing the MANHATTAN® Hi-Speed USB 2.0 to
SATA/IDE Adapter, Model 179195.
This convenient device connects SATA, SATA-enhanced, IDE and
enhanced-IDE hard disks to desktop and notebook computers using a
USB port to more easily transfer, share and back up les or store large
le archives on external drives.
Installation of the adapter is quick and simple, so you’ll soon be enjoying
the benets of these features:
• Supports data transfer SATA speeds up to 1.5 Gbps and Hi-Speed
USB 2.0 speeds up to 480 Mbps
• Supports 48-bit LBA (Logical Block Addressing) for drives up to 750 GB
• Fits external SATA and IDE hard disks up to 5.25”
• Plug and Play; hot-swappable; Windows, Mac and Linux compatible
• Lifetime Warranty
INSTALLATION
NOTE: Do not store or operate this device in excessive heat or humidity.
If the initial installation attempt fails, go to My Computer / Control Panel
/ System Properties / Device Manager and remove any items tagged with
a question mark (?) or exclamation point (!).
1. Connect the Hi-Speed USB 2.0 to SATA/IDE Adapter to the HDD
IDE port and the computer’s USB port.
2. Windows will detect a new device and automatically install the driver.
NOTE: No added software is needed for basic operation of this device.
To use the one-touch backup button/function, however, the included
software needs to be installed (Step 3 below).
• To verify the connection, go to My Computer / Control Panel / System
Properties / Device Manager. Open “Hard disk controllers” to display
the newly added hard disk drive.
• If connecting to a brand new hard disk drive, use “Fdisk” to set its
capacity. NOTE: This will destroy any data on the HDD. Back up any
data on the drive rst if it needs to be saved. Format the HDD using
standard procedures. If its icon appears on the desktop but you can’t
2
Loading...