Page 1
HI-SPEED
USB 2.0 TO
SATA 150
ADAPTER
WITH POWER SUPPLY
USER
MANUAL
Model 179089
MAN-179089-UM-0208-03
Page 2
Thank you for purchasing the MANHATTAN® Hi-Speed USB 2.0 to SATA
150 Adapter with Power Supply, Model 179089.
This convenient device connects external SATA storage devices to
desktop and notebook computers using a USB port so that backing up
les or storing large le archives on external drives is faster and easier
to accomplish.
Installation of the adapter is quick and simple, so you’ll soon be enjoying
the benets of these features:
• Supports data transfer SATA 150 speeds up to 1.5 Gbps and Hi-Speed
USB 2.0 speeds up to 480 Mbps
• Supports 48-bit LBA for drives up to 750 GB
• Fits SATA 150 and CD/DVD drives up to 5.25”
• Plug and Play; hot-swappable; Windows, Mac and Linux compatible
• Lifetime Warranty
INSTALLATION
NOTE: Do not store or operate this device in conditions of excessive heat
or humidity. If the initial installation attempt fails, go to My Computer →
Control Panel → System Properties → Device Manager and remove any
items tagged with a question mark (?) or exclamation point (!).
1. Plug in the power supply and connect it to the SATA device with the
4-pin/15-pin cable.
2. Connect the Hi-Speed USB 2.0 to SATA 150 Adapter to the SATA
device using the SATA data cable, then plug the adapter into the
computer’s USB port.
3. Windows will detect a new device and automatically install the driver
(no added software is needed).
• To verify the connection, go to My Computer → Control Panel →
System Properties → Device Manager. Open “Hard disk controllers”
to display the newly added hard disk drive.
• If connecting to a brand new hard disk drive, use “Fdisk” to set its
capacity. NOTE: This will destroy any data on the HDD. Back up any
data on the drive rst if it needs to be saved.
2
Page 3
• Format the HDD using standard procedures. If its icon appears on the
desktop but you can’t nd it listed, check/conrm that: the HDD has
been properly installed; the correct driver for this HDD is installed.
SPECIFICATIONS
Standards and Certications
• Hi-Speed USB 2.0
• USB 1.1
• SATA 1.0a
• FCC
• CE
General
• Hi-Speed USB 2.0 type A male; eSATA connection 7-pin female ports
• Hi-Speed USB 2.0 transfer interface
• 480 Mbps maximum transfer rate
• Supports SATA and external SATA drives
• Chipset: SPIF215A
Power Supply
• Input 100 – 250 V AC; 50/60 Hz maximum, 0.5 A
• Output: 5 V / 2 A; 12 V / 2 A
Physical
• 4.8 x 2.7 x 1.25 cm (1.9 x 1.1 x 0.5 in.)
• Cables: eSATA, 20 cm (8 in.); power, 1.7 m (67 in.)
• Weight: 275 g (9.7 oz.) with power supply
System Requirements
• Windows 2000/XP/Vista, Mac OS 10, Linux
Package Contents
• Hi-Speed USB 2.0 to SATA 150 Adapter with Power Supply
• eSATA cable
• User manual
3
Page 4
Copyright © MANHATTAN
All products mentioned are trademarks or registered trademarks of their respective owners.
www.manhattan-products.com
MANHATTAN® offers a complete line
of PC Components, Peripherals, Cables and Accessories.
Ask your local computer dealer for more information
or visit us online at
Loading...