Page 1
HI-SPEED
USB 2.0 TO
SATA/IDE
ADAPTER
WITH POWER SUPPLY
USER
MANUAL
Model 179072
MAN-179072-UM-0208-01
Page 2
Thank you for purchasing the MANHATTAN® Hi-Speed USB 2.0 to
SATA/IDE Adapter with Power Supply, Model 179072.
This convenient device connects SATA, SATA-enhanced, IDE and
enhanced-IDE hard disks and CD/DVD drives to desktop and notebook
computers using a USB port so that transferring, sharing and backing
up les or storing large le archives on external drives is faster and
easier to accomplish.
Installation of the adapter is quick and simple, so you’ll soon be enjoying
the benets of these features:
• Supports data transfer SATA 150 speeds up to 1.5 Gbps and Hi-Speed
USB 2.0 speeds up to 480 Mbps
• Supports 48-bit LBA (Logical Block Addressing) for drives up to 750 GB
• Fits external SATA 150 and IDE hard disks and CD/DVD drives up to
5.25”
• Plug and Play; hot-swappable; Windows, Mac and Linux compatible
• Lifetime Warranty
INSTALLATION
NOTE: Do not store or operate this device in conditions of excessive heat
or humidity. If the initial installation attempt fails, go to My Computer ‡
Control Panel ‡ System Properties ‡ Device Manager and remove any
items tagged with a question mark (?) or exclamation point (!).
1. Connect the Hi-Speed USB 2.0 to SATA/IDE Adapter to the HDD
IDE port and the computer’s USB port.
2. Windows will detect a new device and automatically install the driver
(no added software is needed).
• To verify the connection, go to My Computer ‡ Control Panel ‡
System Properties ‡ Device Manager. Open “Hard disk controllers”
to display the newly added hard disk drive.
• If connecting to a brand new hard disk drive, use “Fdisk” to set its
capacity. NOTE: This will destroy any data on the HDD. Back up any
data on the drive rst if it needs to be saved.
Format the HDD using standard procedures. If its icon appears on
2
Page 3
the desktop but you can’t nd it listed, check/conrm the following:
- The HDD has been properly installed
- The HDD is set in the “Master” position
- The correct driver for this HDD is installed
SPECIFICATIONS
Standards and Certications
• Hi-Speed USB 2.0
• USB 1.1
• Complies with ATA/ATAOI-100 spec v1.0 standards
• SATA 1.0a
• FCC
• CE
General
• 1 Hi-Speed USB 2.0 type A male; 1 SATA 150 L-type male; IDE 40-pin;
IDE 44-pin ports
• Hi-Speed USB 2.0 transfer interfaces
• HDD/CD-ROM/CD-R/RW/DVD/MO/ZIP-compatible mode
• 480 Mbps maximum transfer rate
• Supports SATA, enhanced-SATA, IDE and enhanced-IDE drives
Power Supply
• Input 100 – 250 V AC; 50/60 Hz maximum, 0.5 A
• Output: 5 V / 2 A; 12 V / 2 A
Physical
• 3.8 x 2.5 x 1.25 cm (2.75 x 1.75 x 0.5 in.)
• Cables: USB, 76.2 cm (30 in.); SATA, 10 cm (4 in.); 4-pin housing /
SATA Y-power, 10 cm (4 in.); power, 1.7 m (67 in.)
• Weight: 303 g (10.7 oz.) with power supply
System Requirements
• Windows 2000/XP/Vista, Mac OS 10, Linux
Package Contents
• Hi-Speed USB 2.0 to SATA/ IDE Adapter with Power Supply
• User manual
3
Page 4
Copyright © MANHATTAN
All products mentioned are trademarks or registered trademarks of their respective owners.
www.manhattan-products.com
MANHATTAN® offers a complete line
of PC Components, Peripherals, Cables and Accessories.
Ask your local computer dealer for more information
or visit us online at
Loading...