Thank you for purchasing the MANHATTAN® FireWire PCI Card, Model
167901 or 176996 (with cable). The easy-to-follow instructions in this
manual help make installation of the card quick and simple, so you’ll
also soon be enjoying the benets of these features:
• Adds a 4-pin and 2 6-pin external ports and a 6-pin internal port to a
desktop computer
• Easily connect camcorders, external enclosures and more — daisy chain up to 63 other FireWire devices
• Each port supports FireWire speeds of up to 400 Mbps
• Includes full-version VideoStudio 9 SE editing and authoring software
(Model 176996 only)
• Plug and Play; hot-swappable; Windows compatible
• Lifetime Warranty
System Requirements
• Windows 2000/XP/Server 2003/Vista
• Available punch-out and PCI slots
Package Contents
• FireWire PCI Card (Model 176996 with cable and software CD)
• Quick install guide/user manual
HARDWARE INSTALLATION
IMPORTANT: Internal port P1 shares
functionality with external port P2.
Do not use P1 and P2 at the same time.
1. Turn off your computer.
2. Unplug the power cord and remove
your computer’s cover.
3. Remove the slot bracket from an
available PCI slot.
4. To install the card, carefully align the card’s bus connector with the
selected PCI slot on the motherboard. Push the board down rmly.
5. Replace the slot bracket’s holding screw to secure the card.
6. Replace the computer cover and reconnect the power cord.
P1
P2 P3 P4
P1, P2 & P4 = 6-pin; P3 = 4-pin