Manhattan 150583 User Manual

SUPERSPEED USB
EXPRESSCARD/34

USER
MANUAL

Model 150583

MAN-150583-UM-0110-01

2

Thank you for purchasing the MANHATTAN® SuperSpeed USB
ExpressCard/34, Model 150583.

Connect data storage, digital media and other USB peripheral devices
to an ExpressCard-compatible notebook computer by adding a pair of
hot-swappable, external ports — supporting SuperSpeed USB (5 Gbps),
Hi-Speed (480 Mbps), full-speed USB 1.1 (12 Mbps) and low-speed
USB 1.0 (1.5 Mbps) — with a total throughput of 2.5 Gbps.

Installation of the card is quick and simple, so you’ll soon be enjoying

the benets of these additional features:

• Fits ExpressCard/34 and ExpressCard/54 slots

• Built-in DC jack provides direct power to external USB devices

• Plug and Play installation; hot-swappable — Windows compatible

• Lifetime Warranty

System Requirements

• Windows XP/Vista/7 32- and 64-bit

• PCI Express-enabled system with an available ExpressCard slot

HARDWARE INSTALLATION

Below are basic installation steps. Because system designs vary, refer to
your system’s manual for additional information if needed. NOTE: When

using an external power adapter (not included), make sure it’s 5 V DC

with a 2 A positive center post.

1. Turn off your notebook computer.

2. Insert the SuperSpeed USB ExpressCard/34
in the ExpressCard slot, checking that the
card is making a solid connection.

3. Turn on your notebook
computer.

2 USB 3.0 ports

Power

adapter jack

(adapter not

included)

DRIVER INSTALLATION

1. Insert the included driver CD into the notebook’s CD-ROM drive.

2. On the computer desktop, go to Start, then Run.

3. Enter “D:\ExpressCard\NEC uPD720200\Setup.exe” (where “D” or
another appropriate letter corresponds to your CD-ROM drive
designation), then click “OK.”

4. Follow the on-screen instructions to complete the installation.

Verifying Driver Installation

1. On the desktop, go to Start, then Control Panel, then System
Properties.

2. Click the “Device Manager” tab and conrm that “NEC Electronics USB

3.0 Host Controller” and “NEC Electronics USB 3.0 Root Hub” are both
listed under “Universal Serial Bus controllers,” indicating the driver has

been installed properly.

Standards and Certications

• CE, FCC, USB 3.0, ExpressCard Specication 1.0

Ports

• (2) SuperSpeed USB ports, type A

• Data transfer rates of 5 Gbps, 480 Mbps, 12 Mbps and 1.5 Mbps

• NEC USB controller

• 3.5 mm power jack DC 5 V, 2 A; outside negative/inside positive

(adapter not included)

Bus

• ExpressCard/34

• Bus speed 5 Gbps

• Fully compliant with ExpressCard Speccation 1.0

Package Contents

• SuperSpeed USB ExpressCard/34

• User manual and CD driver

3 3

SPECIFICATIONS

Copyright © MANHATTAN

All products mentioned are trademarks or registered trademarks of their respective owners.

www.manhattan-products.com

MANHATTAN® offers a complete line

of PC Components, Peripherals, Cables and Accessories.

Ask your local computer dealer for more information

or visit us online at