2
Thank you for purchasing the MANHATTAN® 2850 Acoustic Series 
Bookshelf Speaker System, Model 150200.
Easy installation means you’ll soon be enjoying these popular features: 
•  Separate volume and bass controls ne-tune listening experiences
•  Shielded to prevent distortion and maintain clear, crisp sound
•  Lifetime Warranty 
Safety Precautions 
Prior to installing your speakers, read the following safety guidelines to 
help prevent damage to any electrical components or harm to users. 
•  Do not place this product near heat or moisture or their potential sources. 
•  To clean the cabinets, wipe with a soft cloth. Avoid touching the drivers.  
  For heavier cleaning, use a cloth damp from a weak solution of water 
  and mild detergent to remove dirt, then dry immediately. Using rough 
  material, alcohol or chemical solvents could damage the nish or 
  remove the panel lettering. 
•  Do not remove the back panel except as directed by a qualied 
  technician in order to minimize the possibility of electrical shock. For 
  repairs, bring to a professional repair person. 
•  Should liquids or other materials (including fragments of broken parts) 
  get inside the speaker cabinet, immediately cut power to the speaker 
  and have it professionally inspected/repaired before further use. 
•  Turn off the power and unplug the system when it’s not in use. 
CONNECTIONS & OPERATION 
1. Place the speakers in a location where cord, cable and speaker wire  
  connections can be made properly.
2. Use the included speaker wire to connect the speakers to each other 
  (as shown in the diagram). NOTE: Only one unit has a control panel.
3. Use the included RCA to 3.5” stereo cable to connect from the L and
  R Input jacks to your audio source.
4. Connect the included power cord and plug it into an AC outlet.
5. Flip the power switch to the on position.
6. Turn on your audio source and rotate the volume, bass and treble
  control knobs on the speaker to the desired positions.