Page 1
2800 ACOUSTIC SERIES
BLUETOOTH
BOOKSHELF
SPEAKER SYSTEM
USER MANUAL
Model 150194
MAN-150194-UM-0609-01
Page 2
Page 3
Thank you for purchasing the MANHATTAN® 2800 Acoustic Series
Bluetooth Bookshelf Speaker System, Model 150194.
The easy-to-follow installation instructions in this manual will soon have
you enjoying the benets of these popular features:
• Two-way speakers deliver rich, powerful sound
• Exceptional audio performance with most Bluetooth-enabled devices
• Separate volume and bass controls
• Shielded to prevent distortion and maintain clear, crisp sound
• Lifetime Warranty
Package Contents
• 2800 Acoustic Series Bluetooth Bookshelf Speaker System
• Cables and user manual
SAFETY PRECAUTIONS
Prior to installing your speakers, read the following safety guidelines to
help prevent damage to any electrical components or harm to users.
• Do not place this product or any of its parts near heat or potential heat
sources, nor in any moist or damp environment.
• Do not hit, drop or mishandle electrical components in such a way as
to loosen, break or otherwise render inoperative any interior or
exterior parts. Place only on a stable, well-ventilated platform.
• Do not remove the back panel except as directed by a qualied
technician in order to minimize the possibility of electrical shock. If in
need of repair or inspection, bring the speaker(s) to a professional
repair person.
• Should liquids or other materials (including fragments of broken parts)
get inside the speaker cabinet, immediately shut power off to the
speaker and have it professionally inspected and/or repaired before
further operation.
• Turn off the power and unplug from power source when the system is
not in use and during electrical storms.
• Clean with a soft, damp cloth only. Avoid abrasives or chemicals.
3 3
Page 4
44
SETUP/CONNECTIONS
1. Carefully unpack the speakers. Do not lift or remove the speakers from
the box by the function knobs or attached cords and cables, as this
may damage the speaker unit. Place the speakers in a location where
cord and cable connections can be made easily and properly.
2. Connect the speakers to each other by inserting the RCA cable from
unit B into the Audio Out jack of unit A (as shown in the above diagram).
3. Plug the AC power cord on unit A into a convenient outlet.
Rotating the knob on the rear panel of unit A clockwise will turn the
speakers on and control the volume. First, however, refer to Bluetooth
Setup below to initialize the speaker system.
NOTE: After the Bluetooth Setup procedure is completed, if either speaker
doesn’t provide sound once power is on, check all the connections and
controls. If only one speaker emits CD audio when the system is plugged
into a headphone jack, it’s because WAV les and games normally
transmit only one track of audio.
Unit BUnit A
AC power
cord
RCA cable
3.5” stereo cable
NOTE: This is
used to connect
the speakers to
an audio source
only if Bluetooth
is not being
used.
Page 5
BLUETOOTH PAIRING/SETUP
FOR IVT SOFTWARE
The following “pairing” procedure — making the Bluetooth Bookshelf
Speaker System compatible with whatever Bluetooth-enabled audio
source is to be used in conjunction with it — is only required the rst
time you set up your speaker system. Subsequent use only requires
that you rotate the knob on the rear panel of unit A clockwise to turn the
speakers on. NOTE: The procedure and screen images presented here
are for IVT’s BlueSoleil software. If your operating system features its
own built-in Bluetooth management software, refer to it for instructions.
1. Turn your computer on and open your Bluetooth program. (Refer to
your Bluetooth user manual if you don’t know how to install and
operate this software.)
5 5
Page 6
66
2. On the front of the unit A speaker (within the
Bluetooth “control panel” at the bottom), press
and hold in the left button until the red and blue
LEDs begin to ash (3 to 5 seconds). The blue
LED represents the status of the Bluetooth system; the red LED
represents the status of the Bluetooth pairing function.
3. Have Bluetooth search for available devices. When
the BT Speakers icon or listing appears on screen
(perhaps among several other found devices), click
on it to begin the pairing process.
4. When the Enter Bluetooth Passkey screen displays, enter “0000” in
the “Passkey” eld. Click “OK.” Remember, this only needs to be done
the rst time you set up your speaker system.
5. Click “Connect” on the nal prompt and you’re ready to enjoy your
Bluetooth Bookshelf Speaker System.
6. Adjust the volume by rotating the knob on the back of the unit A
speaker.
Bluetooth Control Panel
Page 7
7
SPECIFICATIONS
Standards and Certications
• CE
• Bluetooth V1.2
General
• RMS power 5 W x 2
• Frequency response: 150 Hz – 20 kHz
• Signal-to-noise ratio (S/N): <75 dB
• Total harmonic distortion (THD): ≤0.1%
• Impedance: 4 Ohms
• Cabinet: MDF construction (medium-density berboard)
• Driver(s) diameter: woofer, 7.6 cm (3 in.); tweeter, 2.54 cm (1 in.)
• Controls: volume/power with LED indicator, rear-mount
• Power: internal power supply
• Connections: RCA (audio out); 3.5” stereo (audio in)
• Cables: power, 1.2 m (4 ft.); RCA, 1.2 m (4 ft.)
• Dimensions: 9.5 x 12 x 18 cm (3.7 x 4.72 x 7 in.)
Bluetooth
• Bluetooth V 1.2
• Class 2
• A2DP protocol support
• Effective range: up to 20 m (65.6 ft.)
• 748 kbps data rate
Package Contents
• 2800 Acoustic Series Bluetooth Bookshelf Speaker System
• Cables and user manual
Page 8
Copyright © MANH ATTAN
All products mentioned are trademarks or registered trademarks of their respective owners.
www.manhattan-products.com
MANHATTAN® offers a complete line
of PC Components, Peripherals, Cables and Accessories.
Ask your local computer dealer for more information
or visit us online at
Loading...