Mamber's Mark TENTOFBB-BR, TENTOFBB-GR, TENTOFBB-BR-E, TENTOFBB-GR-E Assembly Manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Date 2018-05-29 Rev. 0001-A Factory: JIYIFO

Assembly Manual

Tenley Twin Over Full Bunk Bed

Stock # TENTOFBB-BR

# TENTOFBB-GR
# TENTOFBB-BR-E
# TENTOFBB-GR-E

2 Need Assistance? Call us at 1-888-301-0332 from 8am to 5pm CST Monday - Friday

We are so confident you will be delighted with your Member’s Mark
purchase that we promise to refund or replace any item you find
unsatisfactory. We aim to delight all our members and would love to
hear about your discoveries! Call us at: 1-888-301-0332 (toll-free),
8am - 5pm CST Monday - Friday.

Important Safety Information

 Please read all instructions carefully before assembling this furniture.
 For your safety, assembly by two or more adults is strongly recommended.
 Use only vendor-supplied hardware to assemble this item. Using unauthorized hardware

could jeopardize the structural integrity of the item.

 Hardware may loosen overtime. Periodically check that all connections are tight.

Before Assembly

 Remove all parts and hardware from the box. Place all items on a carpeted or scratch-free

work surface, as this will avoid damaging parts during assembly.

 The shipping box provides an ideal work surface.
 To avoid accidentally discarding small parts or hardware, do not dispose of any packaging

or contents of the shipping carton until assembly is complete.

 Use the parts and hardware lists below to identify and separate each of the pieces included.
 The use of power tools for assembly is not recommended. Power tools can damage the

hardware and/or split the wood.

 NOTE: Do not fully tighten all bolts until all parts are in place. Failure to follow these

instructions may cause the bolts to misalign during assembly.

Care and Cleaning

 Use a soft, clean cloth that will not scratch the surface when dusting.
 Use of furniture polish is not necessary. Should you choose to use polish, test first in an

inconspicuous area.

 Using solvents of any kind on your furniture may damage the finish.
 Never use water to clean your furniture as it may cause damage to the finish.
 Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently.

Avoid rubbing.

 In the event that your furniture is stained or otherwise damaged during use, we recommend

that you call a professional to repair your furniture.

Need Assistance? Call us at 1-888-301-0332 from 8am to 5pm CST Monday - Friday 3

Mattress thickness is from 7 in. (17.78 cm) to 9 in. (22.86 cm) use on lower bunk bed, and
maximum mattress thickness must not exceed 9 in. (22.86 cm) use on upper bunk bed.

Use only mattress which is 74 in. (1.88 m) to 75 in. (1.90 m) long and 37 ½ in. (95.25 cm) to
38½ in. (97.79 cm) wide on upper bunk.

Use only mattress which is 74 in. (1.88 m) to 75 in. (1.90 m) long and 52 ½ in. (1.33 m) to
53 ½ in. (1.36 m) wide on lower bed.

Replacement parts, including additional guardrails, may be obtained from any of our
dealers.

1. Keep all hardware and parts out of the reach of children.

2. Use the long end of the hex wrench to fasten bolts loosely and quickly.

3. Use the short end of the hex wrench for final tightening.

G E N E R A L I N F O R M A T I O N , T I P S A N D T R I C K S

②

①

4 Need Assistance? Call us at 1-888-301-0332 from 8am to 5pm CST Monday - Friday

TO HELP PREVENT SERIOUS OR FATAL INJURIES FROM

ENTRAPMENT OR FALLS

 Follow the information on the warnings appearing on the upper bunk end

structure and on the carton. Do not remove warning label from bed.

 Always use the recommended size mattress or mattress support, or both, to help

prevent the likelihood of entrapment or falls.

 Surface of mattress must be at least 5 in. (12.70 cm) below the upper edge of

guardrails.

 Do not allow children under 6 years of age to use the upper bunk.
 Periodically check and ensure that the guardrail, ladder and other components

are in their proper position, free from damage and that all connectors are tight.

 Do not allow horseplay on or under the bed and prohibit jumping on the bed.
 Always use the ladder for entering and leaving the upper bunk.
 Do not use substitute parts. Contact the manufacturer or dealer for replacement

parts.

 Use of a night light may provide added safety precaution for a child using the

upper bunk.

 Always use guardrails on both long sides of the upper bunk. If the bunk bed will

be placed next to the wall, the guardrail that runs the full length of the bed
should be placed against the wall to prevent entrapment between the bed and
wall.

 The use of water or sleep flotation mattress is prohibited.
 STRANGULATION HAZARD – Never attach or hang items to any part of the

bunk bed that are not designed for use with the bed; for example, but not limited
to, hooks, belts, and jump ropes.

 Prohibit more than one person on upper bunk.
 Keep these instructions for future reference.

This product was manufactured October 2018.

Need Assistance? Call us at 1-888-301-0332 from 8am to 5pm CST Monday - Friday 5

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present
before beginning assembly.

A- Lower Post (Qty. 2) B- Lower Post (Qty. 2) C- Lower Cap Rail (Qty. 2)

D- Lower Top Stretcher (Qty. 2) E- Lower Bottom Stretcher (Qty. 2) F- Lower Panel (Qty. 2)

G- Upper Post (Qty. 2) H- Upper Post (Qty. 1) I- Upper Post (Qty. 1)

J- Upper Cap Rail (Qty. 2) K- Upper Top Stretcher (Qty. 2) L- Upper Bottom Stretcher (Qty. 2)

M- Upper Panel N- Lower Ladder Side Rail O- Lower Mattress Side Rail

(Qty. 2) (Qty. 1) (Qty. 1)

P- Upper Ladder Side Rail Q- Upper Mattress Side Rail R- Long Guardrail

(Qty. 1) (Qty. 1) (Qty. 2)

S- Short Guardrail T- Lower Mattress Support Slats U- Upper Mattress Support Slats

(Qty. 2) (Qty. 1) (Qty. 1)

V- Left Ladder Support (Qty. 1) W- Right Ladder Support (Qty. 1) X- Ladder Step (Qty. 4)

Y- Front Guardrail Post (Qty. 1) Z- Guardrail Support (Qty. 2) AA- Slat Support with Leveler (Qty. 3)

6 Need Assistance? Call us at 1-888-301-0332 from 8am to 5pm CST Monday - Friday

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present
before beginning assembly.

(1) 1/4” x 110 mm Bolt (2) 1/4” x 38 mm Bolt

(Qty. 24+1 extra) (Qty. 5+1 extra)

(3) Floor Protector (4) 6.5 mm x 100 mm Tapping Bolt

(Qty. 4+1 extra) (Qty. 16+1 extra)

(5) 6.5 mm x 48 mm Tapping Bolt (Qty. 26+1 extra) (6) Barrel Nut (Qty. 24+1 extra)

(7) 10 mm x 50 mm Wood Dowel (Qty. 40+2 extra) (8) 4 mm x 35 mm Screw (Qty. 28+1 extra)

(9) 4 mm x 30 mm Screw (Qty. 6+1 extra) (10) Bed Connector Pin (Qty. 4)

L-shaped Hex Wrench (Qty. 1) T-Handle Hex Wrench (Qty. 1)

Tools required: Hex wrench (provided) and Phillips screwdriver (not provided).