MALUX ResistTel MB Operating Instructions Manual

Robust, weather-resistant telephone

www.malux.se

FHF BA 9700-24 12/13

Operating instructions

2

Foreword

Our weatherproof phone offers precision, comfort, extended service life
and reliability. It is programmable and it can withstand harsh
environmental conditions. The phone can be used under severe
conditions including seawater, high humidity, dust and it withstands
strong mechanical shock. It is fitted with an indestructible keypad made
of V4A steel and an extremely robust body made of shock and impact­resistant compression moulded plastic. All components used for making
this phone are resistant against lye and lubricants. The 21-part keypad
optimised for "use with gloves" and made of V4A steel is easy to
operate and thus meets all requirements for a modern and reliable
communications device. The ResistTel MB phone offers a reliable
communication channel when connected to the public network or to
PBX systems.

www.malux.se

3

Table of contents

General operating conditions .......................................................................... 4

Overview ......................................................................................................... 5

Keypad ............................................................................................................ 8

Package contents ........................................................................................... 9

Assembly and installation ................................................................................ 9

Wiring diagram ............................................................................................... 11

Support hook ................................................................................................. 11

Hole pattern .................................................................................................. 12

Putting into service ........................................................................................ 12

Maintenance .................................................................................................. 12

Handset operation ........................................................................................ 13

Open listening ............................................................................................... 13

Hands-free operation .................................................................................... 13

Using the headset ......................................................................................... 14

Operation ...................................................................................................... 15

Receiving calls ......................................................................................... 15

Making a call ............................................................................................ 15

Redialling ................................................................................................ 15

Making a second call ................................................................................ 15

Changing the phone settings ................................................................... 16

Signal tones ............................................................................................ 16

Configuration ................................................................................................ 17

Setting the ringer volume ........................................................................ 17

Selecting a ringtone ................................................................................ 17

Setting the speaker volume ...................................................................... 17

Setting the speaker volume for open listening ........................................ 17

Setting the speaker volume for hands-free operation ............................. 17

Setting the headset volume ..................................................................... 17

Setting or deleting phone numbers for speed dialling ............................. 18

Setting the call procedure ....................................................................... 18

Storing or deleting a trunk access code ................................................. 18

Setting the waiting time after dialling a trunk access code ...................... 18

Setting the duration of a loop current interruption (flash time) ................ 19

Activating/deactivating the change lock ................................................... 19

Setting the PIN number ........................................................................... 19

Activating/deactivating the external speaker ............................................ 20

Restoring factory settings ......................................................................... 20

Factory settings ............................................................................................ 21

Technical data .............................................................................................. 22

Legal requirements ........................................................................................ 25

Service .......................................................................................................... 26

Care and maintenance ................................................................................. 26

Disposal ........................................................................................................ 26

Warnings and safety instructions ................................................................... 26

CE marking ................................................................................................... 27

www.malux.se

4

General operating conditions

1. The ResistTel MB weatherproof phone can be connected to the
telephone lines of analogue exchanges.

2. The handset is fitted with a stray field coil for connecting hearing aid
devices. Persons wearing a hearing aid device with an inductive
receiver can directly receive the signal of the earphone.

3. The optional external speaker can be used in ringer, open listening
and hands-free modes. The volume of the internal speaker is
reduced when the external speaker is turned on.

4. The phone has a receiver mount with a reed contact hook switch.
The handset must be placed back on the mount to end the call. A
conversation is ended and a new call is started by pressing the
disconnect button on the keypad (see page 8).

5. If the you do not make a selection within 2 minutes, the exchange
can cut off the power supply. Then you will stop hearing the dial
tone. In this case, please place back the handset, wait for 2 seconds
and lift the handset again.

6. An acknowledgement tone confirms that the settings have been
stored.

7. When you receive a call, the ResistTel MB phone rings with the
selected volume.

8. Changing the settings can be prevented by setting a PIN number.
Forgetting the PIN number is similar to losing a key. If you forgot the
PIN number, please contact our technical support service.

9. There is a warranty period of 36 months from the date of purchase.
In case of any problems please contact our technical support
service in Germany, Mülheim an der Ruhr

Phone: [phone] · Fax: [phone] · E-mail: [e-mail]
Please use the country code if calling from outside Germany:
Phone: [phone] · Fax: [phone]

www.malux.se

5

In case of issues which cannot be solved by phone, please send the
complete device with a copy of the sales receipt to the following
address:

FHF
Support ResistTel MB
Gewerbeallee 15-19
D-45478 Mülheim an der Ruhr

If no errors are found during the inspection, we shall issue an
invoice for the processing fee.

Overview of the device

(Cover screws)

(Top part

of the phone)

(Screws)

(Snap-in hook)

www.malux.se

6

Overview of the device

Exterior view of the lower part of the phone

Interior view of the upper part of the phone

(Screws)

(Hook)

(Lower part
of the phone)

(Top part of
the phone)

(Pin header)

www.malux.se

7

Overview of the device

Interior view of the lower part of the phone

..........................

Keypad

(Speaker cable)

(Reed contact)

(Sealing plug)

(Cable gland)

(Sealing plug)

(Screws)

(Lower part of

the phone)

(Keypad

connector)

(Programming

interface)

www.malux.se

8

Keypad

Label field

Volume settings buttons

for setting the volume of the
handset, speaker (hands­free and open conversation)

Speed dialling

Loudspeaker

Disconnect

Redial button

Second call

Numeric keys

www.malux.se

9

Package contents

The package contains:

- ResistTel MB phone

- Operating manual

- 2 sticky label panels

- MB sticker

Assembly and installation

The device can be installed only on a solid and vertical wall. Loosen the
screws of the cover (2) (see the overview of the device on page 5 to 7)
and take off the top part of the phone (1). When using the optional
accessories: headset or second headset, mount the hook (10) with two
screws (11) on the rear side of the lower part of the phone (In case of
the above accessories, the hook and the screws and also in case of all
optional accessories the cable gland is included in the respective
package). Insert four screws with a head diameter of 10 to 13 cm in the
opening (20) and mount the lower part of the phone (3) on the wall or a
panel.
Insert the phone wire through the cable gland (4) and connect it to the
clamps 13 and 14 (A, B) according to the wiring plan. Only use wires
with an outer diameter of 5 to 9 mm, the IP66 rating of the device cannot
be otherwise guaranteed.

Connecting the secondary sounder (for W conductor)
(optional accessory)

Remove the sealing plug (5) and screw in the M20x1.5 cable gland
completely. Insert the wire of the secondary sounder through the
cable gland and connect it to the clamps 15 and 16 (Bell shunt 1,
Bell shunt) according to the wiring plan. Only use wires with an outer
diameter of 5 to 9 mm, the IP66 rating of the device cannot be
otherwise guaranteed.

Connecting the speaker (optional accessory)

Remove the sealing plug (6) and screw in the M20x1.5 cable gland
completely. Insert the wire of the speaker through the cable gland
and connect it to the clamps 11 and 12 (SPK+, SPK-) according to
the wiring plan. Only use wires with an outer diameter of 5 to 9 mm,
the IP66 rating of the device cannot be otherwise guaranteed.

www.malux.se