Malone MPG350 User Manual

A

A

L

L

O

O

N

N

E

E

R

K-Rack is sold in singles (MPG353) and sets of two (MPG354). Please review instructions before installation.

To assemble your K-Rack:

1. Remove all components from the box.

2. Mount Suction Cups to the Molded Frame.

3. Insert Allen Head Bolts into Cups and through Frame.

4. Place Washers on exposed ends of Bolts.

5. Install Lock nuts to the Bolts with Allen Wrench.

NOTE: DO NOT OVERTIGHTEN LOCK NUTS.

AFTER INSTALLATION, THE SUCTION CUPS SHOULD

PIVOT UP AND DOWN FOR CONTOURED SURFACES.

Assembly

Required

Components

Molded Frame
Suction Cup
Allen Wrench
Allen Head Bolt
Washer
Lock nut

Install K-Rack on a Hatchback or SUV:

1. Conrm the mounting surface
area and the suction cups are
clean and free of dust.

2. Secure a K-Rack to the rear
window as shown. For MPG353,
go to instruction # 4.

3. Secure the 2nd K-Rack (MPG354)
to the roof of the vehicle.

4. Ensure the suction cup(s) are
well attached before loading.

Install K-Rack on a Sedan:

1. Conrm the mounting surface
area and the suction cups are
clean and free of dust.

2. Secure a K-Rack to the trunk
as shown. For MPG353,
go to instruction # 4.

3. Secure the 2nd K-Rack (MPG354)
to the rear window of the vehicle.

4. Ensure the suction cup(s) are
well attached before loading.

Loading and Usage Precautions:

Gently place the bow of the kayak into the lower K-Rack. Continue to hold the kayak to prevent slippage.
Walk back to the stern of the kayak. Lift the kayak and walk it forward sliding across the K-Rack(s).
Tie-down the kayak and then remove the K-Rack(s) before driving away.
To unload the kayak, simply install your K-Rack(s) and reverse the above process.
The K-Rack is a loading device only and should never be used for transport or storage.

MALONE AUTO RACKS, 81 County Road, Westbrook, Maine 04092

Phone: [phone] Fax: [phone]

Website: www.maloneautoracks.com Email: [e-mail]

MALONE

R

Limited Lifetime Warranty

The Malone Auto Racks (Malone) Limited Lifetime Warranty covers certain Malone-brand products that have been specically
identied for inclusion in the program and is eective for as long as the original retail purchaser owns the product. This
warranty is terminated when the original retail purchaser sells or otherwise transfers the product to any other person or entity.

Subject to the limitations and exclusions described in this warranty, Malone will remedy defects in materials and/or
workmanship by repairing or replacing, at its option, a defective product without charge for parts or labor. Malone may
elect, at its option, not to repair or replace a defective product but rather issue to the original retail purchaser a refund
equal to the purchase price paid for the product, or credit to be used toward the purchase of a replacement Malone
product.

This warranty does not cover, and no warranty is given for defects or problems caused by normal wear and tear which
includes but is not limited to surface (aesthetic) metal corrosion, scratches, dents, deformities, accidents, unlawful
vehicle operation, or any modication of a product not performed or authorized in writing by Malone.

In addition, this warranty does not cover problems resulting from conditions beyond Malone’s control including, but not
limited to, theft, misuse, overloading, or failure to assemble, mount or use the product in accordance with Malone’s
written instructions or guidelines included with the product available to the original retail purchaser.

No warranty is given for Malone products purchased outside of the United States, Canada and Mexico.

If the product is believed to be defective, the original retail purchaser should contact the Malone dealer from whom it
was purchased, who will give the original retail purchaser instructions on how to proceed. If the original retail purchaser
is unable to contact the Malone dealer, or the dealer is not able to remedy the defect, the original retail purchaser should
contact Malone by email at [e-mail].

In the event that the product must be returned to Malone, a technician at the email address above will provide the
original purchaser with return shipping instructions. The original purchaser will be responsible for the cost of mailing
the product to Malone. In order to receive any remedy under this warranty, a copy of the original purchase receipt,
a description of the defect and a return address must be provided.

Disclaimer of Liability

Repair or replacement of a defective product, or the issue of a refund or credit (as determined by Malone) is the original
retail purchaser’s exclusive remedy under this warranty. Damage to original purchaser’s vehicle, cargo, or property, and/
or to any other person or property is not covered by this warranty.

This warranty is expressly made in lieu of any and all other warranties, express or implied, including the warranties of
merchantability and tness for a particular purpose.

Malone’s sole liability is limited to the remedy set forth above. In no event will Malone be liable for any direct, indirect,
consequential, incidental, special, exemplary, or punitive damages , or, for any other damages of any kind or nature
(including but not limited to, lost prots, lost income or lost sales).

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations
may not be applicable. This warranty gives you specic legal rights and you may also have other rights which vary from
state to state.

In addition, all vehicular transports are potentially hazardous. Any person using MALONE products are personally
responsible for following the given directions for use, installation and accepts full responsibility for any and all damages
or injury of any kind including death, which may result from their use.

MALONE AUTO RACKS, 81 County Road, Westbrook, Maine 04092

Phone: [phone] Fax: [phone]

Website: www.maloneautoracks.com Email: [e-mail]