malimexPro 800/8, 0 T2 Instruction Manual

1

Copy of Instruction Manual

800/8,0 Tele Mirror Lens T2

Gewerbering 26

86666 Burgheim

Tel. +49 84 32 / 9489-0

Fax. +49 84 32 / 9489 - 8333

eMail: [e-mail]

www.foto-walser.de

2

Content

0. ........................................................................................................................................... Introduction 3

1. ................................................................................................................................ Mounting your lens 3

2. ....................................................................................................................................Focusing the lens 3

3. ..................................................................................................................... Light and contrast control 3

4. ...................................................................................................................................................... Filters 4

5. ......................................................................................... Exposure or adjustment with TTL- cameras 4

6. .................................................................................................................. Camera without TTL-system 5

6.1 ...................................................................................... Filter utilization chart (Exposure adjustment) 5

7. ......................................................................................................................................... Depth of field 5

8. .................................................................................................................... Cleaning and maintenance 6

9. ............................................................................................................................... Fault settings 6

10. .............................................................................................................. Technical specifications 7

11. .................................................................................................................... Included in delivery 7

3

Your new catadioptric lens or Reflex Mirror lens is a highly developed computer designed product, using
the merits of both reflex optics and refraction optics. This gives you very sharp picture quality with less
color aberration, which is considered the most harmful factor in the field of telephoto photography.
Each lens comes with interchangeable rear insert filters. Optional filters are exclusively designed for the
Reflex Mirror lenses.

1. Mounting your lens

Your Lens utilizes a universal mounting ring (T2) which allows your lens to fit practically
all SLR cameras manufactured since 1960. Simply attach the specific T2 adapter for your
style camera to the actual lens and then mount to your camera body in the same way as
your existing lens, which your camera is equipped. Also remove your lens the same way
as your existing lens and consult your camera introduction manual for further details.
After mounting your T2 adapter to the lens, you may have to adjust the T -mounts so that
the top of the lens faces upward. If this is necessary, loosen the 3 small screws located
on the T-mounts and turn the lens until it is in the proper usable position. Make sure to
retighten the 3 screws after you make the adjustments.

2. Focusing the lens

Focusing is accomplished while viewing the subject through the viewfinder of your camera and
rotating the focusing ring. Since the aperture is preset, you will find under certain light conditions
a shadow appearance on the split-image section of your focusing screen. In this case, simply
focus on the edges of your subject with the outer center of your fresnel prism.

NOTE: In order to compensate focusing when normal focusing position may differ due to extreme

temperature change, the focusing ring has been designed to allow rotation beyond tile
fixed engraved marks of the distance scale. To avoid errors, focusing should always be
made while looking through the viewfinder.

NOTE: No adjustment of focusing is necessary when taking infrared photography, as is required

with normal lenses.

3. Light and contrast control

Since the reflex lens is not equipped with a diaphragm system, the use of filters plays an
important factor in the control of light and contrast.