Malibu Kayaks Mini-X Installation Manual
Reinforcement Installation
Mini-X
A. 3” x 2” x 8” (x1)
B
A
B
2
B. 3” x 2” x 5.5” (x2)
C. 3” x 2” x 5.75” (x4)
D. 3” x 2” x 4” (x2)
31
Align the center block (A) with
the center of the hull.
4
A
The center block (A) should be
positioned as shown in this
picture.
www.malibukayaks.com support@malibukayaks.com 1-877-952-9257
Place center block (A) below the
hatch opening.
5
Now, place the blocks (B)
underneath the seat. Mount the
blocks securely onto the inner
grooves.
Malibu Kayaks LLC. all rights reserved.
Insert block (A) between the cut
edge and seat groove. Push the
block to lock into place.
6
B
B
Each block (B) should be
positioned as shown in this
picture.
1
c c
Reinforcement Installation
Mini-X
C. 3” x 2” x 5.75” (x4)
D
D
D. 3” x 2” x 4” (x2)
cc
7
2
8
9
Insert each block (C) underneath
the standing platform.
Insert the last pair of blocks (D)
underneath the footwell,
between the scupper holes.
www.malibukayaks.com support@malibukayaks.com 1-877-952-9257
Pull and squeeze each block (C)
onto the outer grooves.
Mount these blocks (D) onto the
inner grooves. Push each block
securely into place.
Malibu Kayaks LLC. all rights reserved.
Check the blocks (C) are tightly
fixed between the groove and
below the standing platform
area.
1210 11
D
D
Make sure each block (D) is
tightly positioned as shown in
this picture.
2
Loading...