![](/html/e9/e9d1/e9d14423dd685ac85797e299d2f61b0ca0d3eadaf6cc5ec814f1513dffd20231/bg1.png)
Assembly Instructions
Hardware and Parts
(2)
1-1 Attach part ( D ) ,
Seat Back Assembly
, to part ( E ),
Seat Assembly
,
as shown in Figure 1, see detail 1 , 2, using ( 4 ) pan head screw s ( A ) ,
1 on each leg, tighten screws using a phillips-head screwdriver .
Do not use
any hand drill
on this product
Assembly Instructions
2.75
ALLEN WRENCH
( included )
B
( Seat Back Assembly )
(Left Arm Leg)
Assembly
D
(Right Arm Leg)
Assembly
( Seat )
Assembly
F
E
Figure 1
You will also need a phillips-head screwdriver
( not included )
(16)
C
G
Maywood Love Seat
(MMAY-LS)
(4)
A
( Middle Leg )
H
( Seat Back Assembly )
D
( Seat )
Assembly
E
( Middle Leg )
H
( Detail 1 )
( Detail 2 )
( Detail 3 )
1- 2 Attach part ( H ) ,
Middle Leg
, to
Assembly
,
as shown in Figure 1, see detail 4 using ( 2 ) Joint connector (I) (2)washers (J)
(2) lock washer (K) (2) hex nuts (L) tighten bolts using allen wrench.
1 on each side of leg, tighten screws using a phillips-head screwdriver .
A
A
I
( Detail 4 )
1.25
1.50
(2)
(2)
(2)
I
(2)
C
D
E
2.75
![](/html/e9/e9d1/e9d14423dd685ac85797e299d2f61b0ca0d3eadaf6cc5ec814f1513dffd20231/bg2.png)
Figure 2
2 - 1 Attach part ( G ),
Right Arm Leg Assembly
,
and part ( F ), Left Arm Leg Assembly to Assembly
from Figure 1 as shown in Figure 2 see detail 5 and
detail 6 , using ( 2 ) pan head screws ( A ) , 1 on each side,
tighten screws using a phillips-head screwdriver .
Please contact one of our Product Specialists for assembly assistance or questions at 1-866-947-7632 or email info@malibu-outdoor.com.
Specialists are available weekdays 8:30 a.m. to 4:30 p.m. EST
CARE AND MAINTENANCE
To clean Your product, use mild soap and water. For heavy soil build-ups use any Non-Abrasive household cleaners.
Figure 3
2- 2 To secure the arm s to the back of the chair,
as shown in detail 7 and detail 8 , using ( 2 )
of lag screws ( B ) , 1 on each side,
tighten screws using an Allen Wrench .
3 - To secure the arms from twisting and the legs to the seat
use 16 of screws ( C ) as shown in figure 3 see detail 9 ,
tighten screws using a phillips-head screwdriver .
B
B
A
A
B
(Left Arm Leg)
Assembly
F
G
(Right Arm Leg)
Assembly
A
A
BB
B
( Detail 5 )
( Detail 6 )
( Detail 7 )
( Detail 8 )
c
( Detail 9 )