• Rechargeable Job Site Light
• Lampe à batterie
• Linterna fluorescente a batería
ML142
ML143
ML183
ML142
ML143/183
Symbols
The followings show the symbols used for the tool. Be sure that you understand their meaning before use.
Symboles
Nous donnons ci-dessous les symboles utilisés pour l’outil. Assurez-vous que vous en avez bien compris la signification avant d’utiliser l’outil.
Símbolos
A continuación se muestran los símbolos utilizados con esta herramienta. Asegúrese de que entiende su significado
antes de usarla.
❏ Read instruction manual.
❏ Lire le mode d’emploi.
❏ Lea el manual de instrucciones.
Do not touch the fluorescent tube which is hot in use or immediately after putting out light. You
❏
may get burnt.
❏ Ne pas toucher l’ampoule en cours d’utilisation ou immédiatement après l’avoir éteinte. Elle est
chaude et vous risqueriez de vous brûler.
❏ No toque la bombilla mientras esté siendo usada ni inmediatamente después de haberla apa-
gado porque estará caliente. Podría quemarse.
3
ENGLISH
Explanation of general view
1 Battery cartridge
2 Reflector (ML142 only)
3 Fluorescent tube
4 Lamp cover
5Screw ring
SPECIFICATIONS
Model ML142 ML143 ML183
Power source D.C. 14.4 V D.C. 14.4 V D.C. 18 V
Fluorescent tube Compact FL13 W Compact FL13 W Compact FL13 W
Dimensions
(L x W x H)
Net weight 0.35 kg 0.37 kg 0.37 kg
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications may differ from country to country.
347 mm x 94 mm x 116 mm 411 mm x 94 mm x 116 mm
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock,
and personal injury, including the following:
READ ALL INSTRUCTIONS.
1. Read this instruction manual and the charger instruction manual carefully before use.
2. This tool is not water-proof. Do not use it in damp or wet locations. Do not expose it to rain or snow. Do
not wash it in water.
3. A short-circuit can cause a large current flow, overheating, possible burns and even a breakdown.
(1) Do not touch the battery terminals with any conductive materials.
(2) Avoid storing the battery cartridge in a container with any metal objects such as nails, coins, etc.
4. Never expose the battery cartridge to flames, fire or great heat. Breakage may cause release of injurious
material.
5. Do not disassemble the charger or battery cartridge; take it to a qualified serviceman when service or
repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
6. When the tool is not in use, always switch off and remove the battery cartridge from the tool.
7. Do not give the tool a shock by dropping, striking, etc.
8. Do not expose the light to eyes continuously. It may hurt them.
9. Do not cover or clog the lit tool with cloth or carton, etc. It may create a risk of fire.
10. If you notice that the tool is hot or in abnormal condition, consult your nearest Makita Service Center or
dealer. When the switch is turned “ON”, the handle of the tool may become slightly hot, even if the fluorescent tube is not installed or is not lighted. This is a normal condition and does not indicate problem.
11. If any problem develops, consult your nearest Makita Service Center or dealer. To maintain product safety
and reliability, repairs, maintenance or adjustment should be carried out by Makita Authorized Service
Center.
12. Switch off the light immediately when the lamp gets dark in use. If you leave the lamp switched on, the
battery cartridge capacity may decrease.
SAVE THESE INSTRUCTIONS.
6Switch
7 Hook (ML142 only)
8 Strap (ML142 only)
9 Loosen
10 Tighten
(when the hook is pulled out)
350 mm x 94 mm x 116 mm
(when the hook is stored)
11 Connecting ring
12 Cap
13 Ring
14 Metal fitting
15 Hook (ML143/183 only)
411 mm x 95 mm x 154 mm
(when the hook is pulled out)
350 mm x 95 mm x 154 mm
(when the hook is stored)
4