Makita HP331DSAX1 User Manual

Satisfy Professional's Needs

10mm (3/8”) Single-sleeve
keyless chuck
(DF331D, HP331D)

18 Torque Settings

Single LED job light
with pre-glow and
afterglow functions

Variable speed control
by trigger

Mechanical 2-speed
transmission

Best possible ergonomic handle
for driver-drill applications

In order to provide maximum

A

thrust to the bit, the top back
of the handle is ergonomically
contoured and widened according
to the U-shape formed between

A

user’s thumb and index nger.

Ribbed rubber grip enables

B

B

all nger tips to hold the
handle securely against the strong
rotational force of counter torque
even in single-handed operation.

Cordless Driver Drill
Cordless Hammer Driver Drill
Cordless Impact Driver

Photo: HP331D

Belt clip

Cordless Driver Drill DF331D / DF031D

Torque Setting 18

Brake

Mechanical 2-Speed

Variable Speed

Reversing

Built-in Job Light

Carrying Case

Cordless Hammer Driver Drill

Torque Setting 18

Brake

Mechanical 2-Speed

Variable Speed

Reversing

Built-in Job Light

Carrying Case

Standard Equipment :

Capacity

Impacts per minute (ipm)

No load speed (rpm)

Max tightening torque
Max lock torque
Dimensions
(L x W x H)
Net weight*

Battery, Charger, Battery cover, Belt clip, Phillips bit

Capacity

No load speed (rpm)

Max tightening torque
Max lock torque
Dimensions (L x W x H)
Net weight*

HP331D

Steel : 10mm (3/8")
Wood : 21mm (13/16")
Masonry : 8mm (5/16")
Hi : 0-25,500
Lo : 0-6,750
Hi : 0-1,700
Lo : 0-450
Hard / Soft : 30 / 14N·m
28N.m (250in.lbs)
201x66x209mm
(7-7/8"x2-5/8"x8-1/4")

1.1kg (2.5lbs) with BL1020B

1.3kg (2.9lbs) with BL1040B

10mm (3/8”)

Cordless Impact Driver TD110D

BL1015

10.8V 1.5Ah

10mm (3/8”)

DF331D DF031D

Steel : 10mm (3/8")
Wood : 21mm (13/16")
Hi : 0-1,700
Lo : 0-450
Hard / Soft : 30 / 14N·m
28N.m (250in.lbs)
189x66x209mm (7-7/16"x2-5/8"x8-1/4")

1.1kg (2.4lbs) with BL1020B

1.3kg (2.8lbs) with BL1040B

Standard Equipment :

Variable Speed

Brake

Reversing

Built-in Job Light

Carrying Case

Capacity

Impacts per minute (ipm)
No load speed (rpm)
Max tightening torque
Dimensions (L x W x H)
Net weight*

Standard Equipment :

Items of standard equipment and specications may vary by country or area.*weight according to EPTA-Procedure 01/2003

BL1020B

10.8V 2.0Ah

with Battery fuel gauge with Battery fuel gauge

Steel : 10mm (3/8")
Wood : 21mm (13/16")
Hi : 0-1,700
Lo : 0-450
Hard / Soft : 30 / 14N·m
28N.m (250in.lbs)
157x66x209mm (6-3/16"x2-5/8"x8-1/4")

0.94kg (2.1lbs) with BL1020B

1.1kg (2.4lbs) with BL1040B

Battery, Charger, Battery cover, Belt clip, Phillips bit

Charger, Battery cartridge, Belt clip, Phillips bit

Makita Corporation

3-11-8 Sumiyoshi-cho, Anjo, Aichi, 446-8502 Japan

BL1040B

10.8V 4.0Ah

Machine screw :
M4 - M8mm (5/32" - 5/16")
Standard bolt :
M5 - M12 (3/16" - 1/2")
High strength bolt :
M5 - M10 (3/16" - 3/8")
Coarse thread (in length):
22 - 90mm (7/8" - 3-1/2")
0-3,500
0-2,600
110N.m (970in.lbs)
153x66x204mm

1.0kg (2.3lbs) with BL1020B

1.2kg (2.6lbs) with BL1040B

(6"x2-5/8"x8-1/8")

PRINTED IN JAPAN 201509

Powered by Slide Li-ion Battery of Makita’s New 10.8V Platform

Cordless Hammer Driver Drill

BL1015

1.5Ah

10mm (3/8”)

HP331D

Cordless Impact Driver

TD110D

BL1020B

2.0Ah

Cordless Driver Drill

BL1040B

4.0Ah

10mm (3/8”)

DF331D

Cordless Driver Drill

10mm (3/8”)

DF031D

Fast Charging

Compact eXtreme Technology

22 minutes

DC10SA

to fully charge a 1.5Ah slide
Li-ion battery

BL1015

Forced air cooling system

・Stand-by time until the charge starts can be greatly shortened by

using charger DC10SA equipped with a built-in cooling fan.

・Eectively cools down every battery cell with the forced air cooling

system and the heat sinks.

Charging status indicator

shows the charging status of a battery
being charged in 2 stages: less than 80%
and 80% or more.

DC10SA only

Cooling fan

DC10SA

Developed specially for charging
the slide Li-ion batteries of
new 10.8V platform

Compact and lightweight design

DC10WD provides higher charging performance
than DC10WA, but with a more compact and
lightweight design.
(It’s same charging time(50mim.)as DC10WA for

1.3Ah battery although the new battery is 1.5Ah.)

Multi-Contact Slide-type Terminal

・Ensuresstablecontactwithtooleven

underextremevibration.

・Allowstoolstobeequippedwithan

ergonomichandledesign.

Wall mountable for charging

can be mounted on the wall for charging,
allowing the user to obtain maximum working
space on workbench.

Increased motor power for higher application
speed and max tightening torque

Cordless Driver Drill

DF331D
DF031D

6.35mm (1/4")
Hex chuck

No load speed:
0-1,700rpm
Max tightening torque:
30N·m (270in·lbs)
(Hard joint)

Cordless Hammer Driver Drill

HP331D

No load speed: 0-1,700rpm
Max tightening torque:

30N·m (270in·lbs) (Hard joint)

Li-ion Battery & Charger Time Reference, Compatibility Chart

BL1020B

10.8V 2.0Ah

with Battery fuel gauge

30

min

70

min

DC10SA

for 10.8V

DC10WC

for 10.8V

BL1015

10.8V 1.5Ah

with Battery fuel gauge

22

min

50

min

60

min

130

min

BL1040B

10.8V 4.0Ah

Battery fuel gauge

(BL1020B, BL1040B)

The power remaining in the
battery can be indicated in 4
stages simply by pushing a button.

Push button

Battery fuel gauge
(4 stage LED)

Cordless Impact Driver

TD110D

No load speed: 0-2,600rpm
Max tightening torque:
110N·m(970in·lbs) (Hard joint)