Page 1
1/2" HAMMER DRILL Model HP1500* (MME)
1/2" HAMMER DRILL KIT Model HP1501K(MME)
02-2002
Page 2
Item Part No.
No. No. Used Description
1 265995-6 8 Tapping Screw PT4x18
3
4 415453-4 2 Change Button
6
9 191927-6 2 Carbon Brush CB-407 (2/set)
10 643936-6 2 Brush Holder (Old 643923-5)
11 921919-9 1 Bolt M8x110
12 415485-1 1 Grip Base
13 152521-9 1 Grip 36 Com. (Old 152489-9)
15 251460-1 1 (-) Flat Screw M6x22(Old 251425-3)
16 256251-5 1 Pin 4 (Added)
17
18 233091-8 1 Compression Spring 16
19 211201-7 1 Ball Bearing 6002LLB
20 961055-9 1 Retaining Ring S-15
21 226423-6 1 Helical Gear 41
22
23
24 232134-3 1 Leaf Spring
25
26 211028-5 1 Ball Bearing 627LB
27 633301-7 1 Field
*
*
*
*
*
*
1 Housing (R)
1 Switch
(Includes Hex Nut M8 - 931402-8)
*
1 Spindle
1 Steel Ball 4.8
1 Change Plate
1 Cam Holder Com.
Item Part No.
No. No. Used Description
28 517106-2 1 Armature Assy
(Includes Items 26, 29 & 35)
29 211033-2 1 Ball Bearing 608LB
30 262528-8 1 Sleeve 7
31 265995-6 2 Tapping Screw PT4x18
32 687052-4 1 Strain Relief
33 682549-8 1 Cord Guard
34 664013-1 1 Cord With Plug 2P-18-2.5
35 241869-5 1 Fan 55
36
100 654069-2 2 Receptacle
Accessories
A01
A02 763440-0 1 Chuck Key S13(HP1500*)
A03 415486-9 1 Depth Gauge
A04
A05 824451-1 1 Plastic Carrying Case
A06 192985-5 1 Grip Assy (Includes Items 11 - 13)
A07 182935-8 2 Slide Lock
*
*
*
1 Housing (L)
1 1/2" Drill Chuck & Key Set (HP1500*)
1 1/2" Keyless Drill Chuck (HP1501K)
(Includes Item A07)
(Old 152489-0A)
WIRING DIAGRAM
NOTE: When replacing Types 2 & 3
Switch into Type Housing, cut Rib (Depth)
3.0 ~ 4.0mm as follows:
SEE SERVICE CHANGES
*
2 Model HP1500
2 Model HP1501K
*
Page 3
SERVICE CHANGES
1. Change on Spindle, Cam Holder Com. etc.
Item No. Description Type 1 Type 2
16
17 Spindle 322674-0 (Discontinued) 322900-7
22
23
25
Above parts are completely interchangeable as a set.
When replacing with Type 2 parts, fill enough grease in the hole of Type 2 Spindle .
Type 2 Cam Holder Com. now comes with Oil-less Bearing.
Pin 4
Steel Ball 4.8
Change Plate
Cam Holder Com.
- - - - - 256251-5 (Added)
216002-8 216001-0
344112-2 (No Longer Available) 344419-6
152473-4 (No Longer Available) 152529-3
2. Change on Keyless Chuck .
Item No. Description Type 1 Type 2 Type 3
17
A01 ½” Drill Chuck & Key Set (HP1500) 192552-6
A04 ½” Keyless Drill Chuck (HP1501K) 192284-5
Tightening Torque for Type 3 Spindle and Drill Chuck: 300 ~ 350 kg / f cm
Spindle
322674-0
(With Screw Hole)
(With Screw Hole on Drill Chuck)
192522-5 (With Hole)
(With Hole)
(No Longer Available)
322900-7
(With Screw Hole)
3 Model HP1500
3 Model HP1501K
323757-9
(No Hole)
192541-1
(No Hole)
192692-0
(No Hole)
*
Page 4
3. Change on Housing and Switch.
Item No. Description Type 1 Type 2 Type 3 Type 4
3 Housing (R) 415484-3 415484-3A 182841-7 (Set)
Switch
6
36
Housing (L)
Serial No.
HP1500 ~ 273474G 273475G ~ N/A N/A
HP1501K N/A N/A N/A N/A
651930-4 (No
Longer Available)
415483-5 415483-5A 182841-7 (Set)
651935-4 (No
Longer Available)
651986-7 (651987-5)
4 Model HP1500
4 Model HP1501K
*
Loading...