Makita 9564PC, 9566PC, 9565PC User Manual

4-1/2", 5" & 6" ANGLE GRINDERS

SJS TECHNOLOGY STOPS THE WHEEL AND HELPS PREVENT GEAR DAMAGE

Powerful 13 AMP Motor Delivers More Output for Increased Performance

Gear Housing can be Rotated 90ºLeft and Right for Cutting and Grinding Applications

Refined Design at Only 4.2 lbs.

Labyrinth Construction Seals and Protects the Motor from Dust and Debris by

Creating a Complex Set of Channels Prohibiting Contamination

Ideal for Welders, Fabricators, Masons, Maintenance/Repair and More

INNOVATION

SJS - SUPER JOINT SYSTEM

Coil Spring

Spiral Bevel Gear

Armature

Shaft

The motor armature and the spiral bevel gear are connected by a coil spring.

As the armature starts to rotate,the coil tightens around the spiral bevel gear,which drives the grinding wheel.

If the grinding wheel should accidentally catch or bind, the gears automatically disengage from the motor. SJS stops the wheel, minimizes grinder kickback, and protects the gears.

Lock Spring that joins armature shaft

and spiral bevel gear protects the

gears by absorbing shock

Models

9564PC (4-1/2")

9565PC (5")

9566PC (6")

DURABILITY

Protective Zig-Zag varnish seals the motor from dust and debris

for longer life

COMFORT

Ergonomic paddle switch

for operator comfort

PERFORMANCE DRIVEN

makitatools.com

4-1/2", 5" & 6" ANGLE GRINDERS

Models 9564PC, 9565PC, 9566PC

FEATURES & BENEFITS

■ Super Joint System (SJS) helps prevent gear damage

■ Powerful 13 AMP motor delivers more output for increased performance

■ Gear housing rotates 90

■ Refined design at only 4.2 lbs.

■ “Tool-less” wheel guard to help increase productivity

■ Labyrinth construction seals and protects the motor from dust and debris by

creating a complex set of channels prohibiting contamination

■ Externally accessible brushes for greater serviceability

■ Ideal for welders, fabricators, masons, maintenance/repair and more

STANDARD EQUIPMENT

4-1/2" Grinding wheel (741423-0-1) • 5" Grinding wheel (741407-8-1) • 6" Cutting wheel (724117-A) • “Tool-less”wheel guard (135107-4) • “Tool-less”wheel guard (135108-2) • Cutting wheel guard (165486-6) • Inner flange (224399-1) •• Inner flange (224390-9) • Lock nut (224568-4) •• Lock nut (224574-9) • Side handle (153489-2) ••• Lock nut wrench (782424-9) •••

SPECIFICATIONS

left and right for cutting and grinding applications

9564PC 9565PC 9566PC

9564PC

9565PC

9564PC 9565PC 9566PC

Grinding wheel 4-1/2" 5" 6"

Wire cup brush 3-1/2" 3-1/2" 3-1/2"

Sanding disc 4-1/2" 5" 6"

No load speed 11,500 RPM 11,500 RPM 10,000 RPM

AMPS 13 13 13

Spindle thread 5/8" - 11 UNC 5/8" - 1 UNC 5/8" - 11 UNC

Length 12-1/8" 12-1/8" 12-1/8"

Net weight 4.2 lbs. 4.2 lbs. 4.2 lbs.

UPC 088381-085144 088381-085168 088381-085182

OPTIONAL ACCESSORIES

Super

Thin

Cut-off

Wheel

Grinding

Wheel

Hubbed

Grinding

Wheel

Flex

Wheel

Resin Fiber

Disc

Multi-Disc

Hubbed

Multi-Disc

Diamond

Blade

9566PC

Warn ing: Consult owner/operator manual and adhere to all safety precautions for accessory items. Always use recommended guards. Failure to do so may result in serious injury or death. Refer to ANSI B7.1 and owner/operator manual for proper accessory mounting and grinding procedures and always wear ANSI Z87.1 eye protection.

Makita offers a wide variety of ANGLE GRINDER accessories. For a complete listing, please refer to the Makita General Catalog, or visit our website at makitatools.com, or call 1-800-4MAKITA.

All specifications subject to change without prior notice. All models and accessories subject to stock on hand. NTF-0108-5M MA-1012-07 For more information, call 1-800-4MAKITA or visit

makitatools.com

Makita U.S.A., 14930 Northam St.,La Mirada, CA 90638

Makita 9564PC, 9566PC, 9565PC User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual