Makita 9555NB, 9553NB, 9554NB User Manual

GB Angle Grinder Instruction Manual

F Meuleuse d’angle Manuel d’instructions

D Winkelschleifer Betriebsanleitung

I Smerigliatrice angolare Istruzioni per l’uso

NL Haakse slijpmachine Gebruiksaanwijzing

E Amoladora Manual de instrucciones

P Rebarbadora Manual de instruções

DK Vinkelsliber Brugsanvisning

S Vinkelslipmaskin Bruksanvisning

N Vinkelsliper Bruksanvisning

SF Kulmahiomakone Käyttöohje

GR Γωνιακς Λειαντήρας Οδηγίες χρήσεως

9553NB 9554NB 9555NB

9553NB

9554NB/9555NB

15˚

Symbols

The followings show the symbols used for the tool. Be sure that you understand their meaning before use.

Symboles

Nous donnons ci-dessous les symboles utilisés pour l’outil. Assurez-vous que vous en avez bien compris la signification avant d’utiliser l’outil.

Symbole

Die folgenden Symbole werden für die Maschine verwendet. Machen Sie sich vor der Benutzung unbedingt mit ihrer Bedeutung vertraut.

Simboli

Per questo utensile vengono usati i simboli seguenti. Bisogna capire il loro significato prima di usare l’utensile.

Symbolen

Voor dit gereedschap worden de volgende symbolen gebruikt. Zorg ervoor dat u de betekenis van deze symbolen begrijpt alvorens het gereedschap te gebruiken.

Símbolos

A continuación se muestran los símbolos utilizados con esta herramienta. Asegúrese de que entiende su significado antes de usarla.

Símbolos

O seguinte mostra os símbolos utilizados para a ferramenta. Certifique-se de que compreende o seu significado antes da utilização.

Symboler

Nedenstående symboler er anvendt i forbindelse med denne maskine. Vær sikker på, at De har forstået symbolernes betydning, før maskinen anvendes.

Symboler

Det följande visar de symboler som används för den här maskinen. Se noga till att du förstår deras innebörd innan maskinen används.

Symbolene

Følgende viser de symblene som brukes for maskinen. Det er viktig å forstå betydningen av disse før maskinen tas i bruk.

Symbolit

Alla on esitetty koneessa käytetyt symbolit. Opettele näiden merkitys, ennen kuin käytät konetta.

Σύµβολα

Τα ακλουθα δείχνουν τα σύµβολα που χρησιµοποιούνται για το µηχάνηµα. Βεβαιωθείτε τι καταλαβαίνετε τη σηµασία τους πριν απ τη χρήση.

❏ Read instruction manual. ❏ Lire le mode d’emploi. ❏ Bitte Betriebsanleitung lesen. ❏ Leggete il manuale di istruzioni. ❏ Lees de gebruiksaanwijzing. ❏ Lea el manual de instrucciones.

❏ Leia o manual de instruções. ❏ Læs brugsanvisningen. ❏ Läs bruksanvisningen. ❏ Les bruksanvisingen. ❏ Katso käyttöohjeita. ❏ ∆ιαβάστε τις οδηγίες χρήσης.

❏ DOUBLE INSULATION ❏ DOUBLE ISOLATION ❏ DOPPELT SCHUTZISOLIERT ❏ DOPPIO ISOLAMENTO ❏ DUBBELE ISOLATIE ❏ DOBLE AISLAMIENTO

❏ Wear safety glasses. ❏ Porter des lunettes de protection. ❏ Schutzbrille tragen. ❏ Indossare occhiali di protezione. ❏ Draag een veiligheidsbril. ❏ Póngase gafas de seguridad.

❏ DUPLO ISOLAMENTO ❏ DOBBELT ISOLERET ❏ DUBBEL ISOLERING ❏ DOBBEL ISOLERING ❏ KAKSINKERTAINEN ERISTYS ❏ ∆ΙΠΛΗ ΜΟΝΩΣΗ

❏ Utilize óculos de segurança. ❏ Bær sikkerhedsbriller. ❏ Bär skyddsglasögon. ❏ Bruk vernebriller. ❏ Käytä suojalaseja. ❏ Φορέστε γυαλιά ασφαλείας.

ENGLISH

Explanation of general view

1 Shaft lock 2 Switch lever 3 Wheel guard 4 Screw 5 Bearing box

SPECIFICATIONS

Model 9553NB 9554NB 9555NB

Depressed center wheel diamiter ...........................100 mm 115 mm 125 mm

Spindle thread ....................................................... M10 M14 M14

No load speed (min

Overall length ........................................................ 258 mm 258 mm 258 mm

Net weight ..............................................................1.4 kg 1.4 kg 1.4 kg

Safety class ........................................................... /II /II /II

-1

) ............................................11,000 10,000 10,000

6 Lock nut 7 Depressed center grinding

wheel/ Multi-disc 8 Inner flange 9 Lock nut wrench

10 Shaft lock 11 Exhaust vent 12 Inhalation vent

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Note: Specifications may differ from country to country.

Intended use

The tool is intended for cutting, grinding and sanding of metal and stone materials without the use of water.

Power supply

The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. They are double-insulated in accordance with European Standard and can, therefore, also be used from sockets without earth wire.

Safety hints

For your own safety, please refer to the enclosed safety instructions.

ADDITIONAL SAFETY RULES

1. Always use eye and ear protection. Other per-

sonal protective equipment such as dust mask, gloves, helmet and apron should be worn.

2. Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

3. Keep guards in place.

4. Use only wheels with correct size and wheels

having a maximum operating speed at least as high as the highest No Load Speed marked on the tool’s nameplate. When using depressed center wheels, be sure to use only fiberglassreinforced wheels.

5. Check the wheel carefully for cracks or damage

before operation. Replace cracked or damaged wheel immediately.

6. Observe the instructions of the manufacturer for

correct mounting and use of wheels. Handle and store wheels with care.

7. Do not use separate reducing bushings or adap-

tors to adapt large hole abrasive wheels.

8. Use only flanges specified for this tool.

9. Do not damage the spindle, the flange (espe-

cially the installing surface) or the lock nut. Damage to these parts could result in wheel breakage.

ENB031-6

10. For tools intended to be fitted with threaded hole wheel, ensure that the thread in the wheel is long enough to accept the spindle length.

11. Before using the tool on an actual workpiece, test run the tool at the highest no load speed for at least 30 seconds in a safe position. Stop immediately if there is any vibration or wobbling that could indicate poor installation or a poorly balanced wheel. Check the tool to determine the cause.

12. Check that the workpiece is properly supported.

13. Hold the tool firmly.

14. Keep hands away from rotating parts.

15. Make sure the wheel is not contacting the workpiece before the switch is turned on.

16. Use the specified surface of the wheel to perform the grinding.

17. Do not use cutting off wheel for side grinding.

18. Watch out for flying sparks. Hold the tool so that sparks fly away from you and other persons or flammable materials.

19. Pay attention that the wheel continues to rotate after the tool is switched off.

20. Do not touch the workpiece immediately after operation; it may be extremely hot and could burn your skin.

21. Position the tool so that the power cord always stays behind the tool during operation.

22. If working place is extremely hot and humid, or badly polluted by conductive dust, use a shortcircuit breaker (30 mA) to assure operator safety.

23. Do not use the tool on any materials containing asbestos.

24. Do not use water or grinding lubricant.

25. Ensure that ventilation openings are kept clear when working in dusty conditions. If it should become necessary to clear dust, first disconnect the tool from the mains supply (use non metallic objects) and avoid damaging internal parts.

26. When use cut-off wheel, always work with the dust collecting wheel guard required by domestic regulation.

27. Cutting discs must not be subjected to any lateral pressure.

SAVE THESE INSTRUCTIONS.

+ 9 hidden pages