Makita 9520NB, 9522NB, 9521NB User Manual
Angle Grinder
100 mm 9520NB
115 mm 9521NB
125 mm 9522NB
DOUBLE
INSULATION
SPECIFICATIONS
Model 9520NB 9521NB 9522NB
Depressed center wheel diameter .................................. 100 mm 115 mm 125 mm
No load speed (min
-1
) ..................................................... 12,000 12,000 9,500
Overall length .................................................................. 262 mm 262 mm 262 mm
Net weight ....................................................................... 1.3 kg 1.3 kg 1.3 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Note: Specifications may differ from country to country.
Power supply
The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets without earth wire.
Safety hints
For your own safety, please refer to the enclosed safety instructions.
For European countries only
Noise And Vibration Of Model
9520NB/9521NB
The typical A-weighted sound pressure level is
84 dB (A).
The noise level underworkingmayexceed85 dB (A).
– Wear ear protection. –
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
2
.
Noise And Vibration Of Model 9522NB
The typical A-weighted noise levels are
sound pressure level: 86 dB (A)
sound power level: 99 dB (A)
– Wear ear protection. –
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
2
.
EC-DECLARATION OF CONFORMITY
The undersigned, Yasuhiko Kanzaki, authorized by
Makita Corporation, 3-11-8 Sumiyoshi-Cho, Anjo,
Aichi, 446 Japan declares that this product
(Serial No. : series production)
manufactured by Makita Corporation in Japan is in
compliance with the following standards or standardized documents,
HD400, EN50144, EN55014, EN61000*
in accordance with Council Directives, 73/23/EEC,
89/336/EEC and 98/37/EC.
*from 1st Jan. 2001
Yasuhiko Kanzaki
CE 94
Director
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND
2
1
1
2
3
1 2
3 4
8
2
3
4
5
6
7
10
9
5 6
7 8
3
11
Loading...