Makita 6994D User Manual
Cordless Impact Wrench
6994D
SPECIFICATIONS
Model 6994D
Capacities
Standard bolt ................................................................................................................................. M5— M12
High tensile bolt ............................................................................................................................ M5 — M10
Square drive .......................................................................................................................................... 9.5 mm
No load speed (min
–1
) ...................................................................................................................... 0 — 2,000
Impacts per minute ........................................................................................................................... 0 — 2,600
Max. fastening torque ......................................................................................................................... 68.6 N.m
Overall length ....................................................................................................................................... 185 mm
Net weight (with battery cartridge) .......................................................................................................... 1.3 kg
Rated voltage .................................................................................................................................... D.C. 9.6 V
•
Due to our continuing program of research and development, the specifications herein are subjectto change
without notice.
•
Note: Specifications may differ from country to country.
Safety hints
For your own safety, please refer to the enclosed safety instructions.
For European countries only
The typical A-weighted noise levels are
Noise and Vibration
sound pressure level: 90 dB (A)
sound power level: 103 dB (A)
– Wear ear protection. –
The typical weighted root mean square acceleration
value is 6 m/s
2
.
EC-DECLARATION OF CONFORMITY
The undersigned, Yasuhiko Kanzaki, authorized by
Makita Corporation, 3-11-8 Sumiyoshi-Cho, Anjo,
Aichi, 446 Japan declares that this product
(Serial No. : series production)
manufactured by Makita Corporation in Japan is in
compliance with the following standards or standardized documents,
EN50260, EN55014
in accordance with Council Directives, 89/336/EEC
and 98/37/EC.
Yasuhiko Kanzaki
CE 2000
Director
EC-DECLARATION OF CONFORMITY
The undersigned, Yasuhiko Kanzaki, authorized by
Kao Lung Tamura Electronics Co.,Ltd. No. 4 Industry
1st Street, Ping Tung Industry District Chiao Nan Li,
Ping Tung City, Taiwan declares that this battery
charger
(Serial No. : series production)
manufactured by Kao Lung Tamura Electronics Co.,
Ltd. in Taiwan is in compliance with the following
standards or standardized documents,
EN60335, EN55014, EN61000*
in accordance with Council Directives, 73/23/EEC
and 89/336/EEC.
*from 1st Jan. 2001
Yasuhiko Kanzaki
CE 94
Director
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND
2
2
1
2
1 2
5
6
3 4
8
3
4
7
9
10
5
3
14
Standard bolt
N • m
(kgf • cm)
High tensile bolt
N • m
14
(kgf • cm)
80
(816)
60
(612)
40
(408)
20
(204)
0
1.0 2.0 3.0 4.0
M8 x 45
11
M10 x 45
M12 x 45
13
13
13
(M12)
(M10)
(M8)
12
6 7
15
16
8
80
(816)
60
(612)
40
(408)
20
(204)
0
1.0 2.0 3.0 4.0
M8 x 45
11
M10 x 45
(M10)
13
(M8)
13
5.0
12
Symbols
The following show the symbols used for the tool. Be sure that you understand their meaning before use.
[ Indoor use only
[ Read instruction manual.
[ DOUBLE INSULATION
[ Do not short batteries.
[ Always recycle batteries.
[ Do not discard batteries into garbage can
or the like.
4
Loading...