Makita 6936FD User Manual

ENGLISH

Cordless Impact
Driver

MODEL 6936FD

INSTRUCTION MANUAL

WARNING:

For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

007024

SPECIFICATIONS

Model 6936FD

Machine screw 4 mm - 8 mm

Capacities

No load speed (min-1)

Impacts per minute 0 - 3,200

Overall length 163 mm

Net weight 1.9 kg

Rated voltage D.C. 18 V

• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.

• Note: Specifications may differ from country to country.

Symbols

The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.

..................Only for EU countries

Intended use

The tool is intended for screw driving in wood, metal and
plastic.

Do not dispose of electric equipment
together with household waste
material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life
must be collected separately and
returned to an environmentally
compatible recycling facility.

Standard bolt 5 mm - 14 mm

High tensile bolt 5 mm - 12 mm

0 - 2,600

END001-1

For European countries only
Noise and Vibration

The typical A-weighted noise levels are
sound pressure level: 94 dB (A)
sound power level: 105 dB (A)

Uncertainty: 3 dB
– Wear ear protection. –
The typical weighted root mean square acceleration
value is 6.5 m/s

2

.

These values have been obtained according to EN60745.

EC-DECLARATION OF CONFORMITY

We declare under our sole responsibility that this product
is in compliance with the following standards of stan­dardized documents;

EN60745, EN55014 in accordance with Council Direc­tives, 89/336/EEC, 98/37/EC.

MAKITA INTERNATIONAL EUROPE LTD.

Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND

Responsible manufacturer:
Makita Corporation Anjo Aichi Japan

Yasuhiko Kanzaki CE2005

Director

ENH102-4

2

GENERAL SAFETY RULES GEA002-3

WARNING:

Read all instructions. Failure to follow all instructions listed below may result in

electric shock, fire and/or serious injury. The term “power tool” in all of the
warnings listed below refers to your mains-operated (corded) power tool or battery­operated (cordless) power tool.

SAVE THESE INSTRUCTIONS

Wor k a rea sa fet y

1. Keep work area clean and well lit. Cluttered and

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

3. Keep children and bystanders away while oper-

ating a power tool. Distractions can cause you to

lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase the

risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords

increase the risk of electric shock.

8. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of
electric shock.

Personal safety

9. Stay alert, watch what you are doing and use

common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A

moment of inattention while operating power tools
may result in serious personal injury.

10. Use safety equipment. Always wear eye protec­tion. Safety equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal inju­ries.

11. Avoid accidental starting. Ensure the switch is
in the off-position before plugging in. Carrying

power tools with your finger on the switch or plug­ging in power tools that have the switch on invites
accidents.

12. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may
result in personal injury.

13. Do not overreach. Keep proper footing and bal­ance at all times. This enables better control of the

power tool in unexpected situations.

14. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes, jewellery

or long hair can be caught in moving parts.

15. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of

these devices can reduce dust-related hazards.

Power tool use and care

16. Do not force the power tool. Use the correct
power tool for your application. The correct

power tool will do the job better and safer at the rate
for which it was designed.

17. Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must be
repaired.

18. Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools. Such preventive safety

measures reduce the risk of starting the power tool
accidentally.

3

19. Store idle power tools out of the reach of chil­dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the

hands of untrained users.

20. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tools operation. If damaged, have the power tool
repaired before use. Many accidents are caused

by poorly maintained power tools.

21. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.

22. Use the power tool, accessories and tool bits
etc. in accordance with these instructions and in
the manner intended for the particular type of
power tool, taking into account the working con­ditions and the work to be performed. Use of the

power tool for operations different from those
intended could result in a hazardous situation.

Battery tool use and care

23. Ensure the switch is in the off position before
inserting battery pack. Inserting the battery pack

into power tools that have the switch on invites acci­dents.

24. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one

type of battery pack may create a risk of fire when
used with another battery pack.

25. Use power tools only with specifically desig­nated battery packs. Use of any other battery

packs may create a risk of injury and fire.

26. When battery pack is not in use, keep it away
from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal to
another. Shorting the battery terminals together

may cause burns or a fire.

27. Under abusive conditions, liquid may be ejected
from the battery, avoid contact. If contact acci­dentally occurs, flush with water. If liquid con­tacts eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation or
burns.

Service

28. Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power

tool is maintained.

29. Follow instruction for lubricating and changing
accessories.

30. Keep handles dry, clean and free from oil and
grease.

SPECIFIC SAFETY RULES GEB012-2

DO NOT let comfort or familiarity with product (gained from repeated use)
replace strict adherence to impact driver safety rules. If you use this tool
unsafely or incorrectly, you can suffer serious personal injury.

1. Hold power tools by insulated gripping surfaces
when performing an operation where the cutting
tool may contact hidden wiring or its own cord.

Contact with a “live” wire will make exposed metal
parts of the tool “live” and shock the operator.

2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.

3. Hold the tool firmly.

4. Wear ear protectors.

SAVE THESE INSTRUCTIONS

WARNING:

MISUSE or failure to follow the safety rules stated in this instruction manual
may cause serious personal injury.

4

IMPORTANT SAFETY INSTRUCTIONS FOR
BATTERY CARTRIDGE

1. Before using battery cartridge, read all instruc­tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using bat­tery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively

shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.

4. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.

5. Always cover the battery terminals with the bat­tery cover when the battery cartridge is not
used.

6. Do not short the battery cartridge:

7. Do not store the tool and battery cartridge in

8. Do not incinerate the battery cartridge even if it

9. Be careful not to drop or strike battery.

SAVE THESE INSTRUCTIONS

Tips for maintaining maximum battery life

1. Charge the battery cartridge before completely
discharged.
Always stop tool operation and charge the bat­tery cartridge when you notice less tool power.

2. Never recharge a fully charged battery cartridge.
Overcharging shortens the battery service life.

3. Charge the battery cartridge with room tempera­ture at 10°C - 40°C (50°F - 104°F). Let a hot bat­tery cartridge cool down before charging it.

4. Charge the Nickel Metal Hydride battery car­tridge when you do not use it for more than six
months.

ENC004-1

(1) Do not touch the terminals with any con-

ductive material.

(2) Avoid storing battery cartridge in a con-

tainer with other metal objects such as
nails, coins, etc.

(3) Do not expose battery cartridge to water or

rain.

A battery short can cause a large current flow,
overheating, possible burns and even a break­down.

locations where the temperature may reach or
exceed 50°C (122°F).

is severely damaged or is completely worn out.
The battery cartridge can explode in a fire.

5