Makita 6300D, 6300DW Instruction Manual
n
Dimensions
(LxWxH1
Capacities
No
load speed IRPM)
Steel Wood
Wood
screw High LOW
I
@@
Net
weight
Equipped with Electric Brake
13
mm
(1/2") MODEL 6300D
13
mm
(1/2") MODEL 6300DW
With Fast Charger
13"
1112")
INSTRUCTION MANUAL
21
mm
58mmx75mm
225
mm
x
58
mm
x
272
mm
2.6 kg
113116"l (15164"
x
2-15/16")
-
l"oo
~
450
18.718''
x
2-5/16'' x 10-11/16")
(5.7
Ibs)
10.8
v
1
Hr.
A C
only
50
Hz
~
60
Hr
D.C. 10.8 V
output
Voltage
I
Charging time
I
Input
I
IMPORTANT
SAFETY
INSTRUCTIONS
(For
All Tools)
WARNING:
WHEN USING ELECTRIC TOOLS, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS
BE
FOLLOWED
TO
REDUCE
THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL
INJURY, INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS.
1.
2.
3.
4.
5.
6.
7.
8.
9.
IO.
11.
12.
13.
2
KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries.
CONSIDER WORK AREA ENVIRONMENT. Don't use power tools in damp
or wet locations. Keep work area well
lit.
Don't expose power tools to rain.
Don't use tool in presence of flammable liquids or gases.
KEEP CHILDREN AWAY.
All
visitors should be kept away from work area.
Don't let visitors contact tool
or
extension cord.
STORE IDLE TOOLS. When not
in
use, tools should be stored in dry, and high
or locked-up place
-
out of reach of children.
DON'T FORCE TOOL.
It
will
do the job better and safer at the rate for which
it
was intended.
USE RIGHT TOOL. Don't force small tool or attachment to
do
the job of
a
heavy-duty tool. Don't use tool for purpose not intended.
DRESS PROPERLY. Don't wear loose clothing or jewelry. They can be caught
in
moving parts. Rubber gloves and non-skid footwear are recommended
when working outdoors. Wear protective hair covering to contain long hair.
USE SAFETY GLASSES. Also use face or dust mask
if
cutting operation is
dusty.
DON'T ABUSE CORD. Never carry tool by cord or yank
it
to disconnect from
receptacle. Keep cord from heat, oil, and sharp edges.
SECURE WORK. Use clamps or a vise to hold work. It's safer than using
your hand and
it
frees both hands to operate tool.
DON'T OVERREACH. Keep proper footing and balance at all times.
MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and
safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords periodically and
if
damaged, have repaired by autho-
rized service facility. Inspect extension cords periodically and replace
if
damaged. Keep handles dry, clean, and free from oil and grease.
DISCONNECT TOOLS. When not in use, before servicing, and when chang-
ing accessories, such as blades, bits, cutters.
14.
REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to
see that keys and adjusting wrenches are removed from tool before turning
it
on.
15.
AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger
on switch. Be sure switch is
OFF
when plugging in.
16.
OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only
extension cords intended for use outdoors and
so
marked.
17.
STAY
ALERT.
Watch
what
you
are
doing, use common sense. Don't operate
tool when you are tired.
18.
CHECK DAMAGED PARTS. Before further use of the tool, a guard or other
part that is damaged should be carefully checked to determine that
it
will
operate properly and perform its intended function. Check for alignment of
moving parts, binding of moving parts, breakage
of
parts, mounting, and
any other conditions that may affect its operation. A guard or other part
that is damaged should be properly repaired or replaced by an authorized
service center unless otherwise indicated elsewhere in this instruction
manual. Have defective switches replaced by authorized service center. Don't
use tool if switch does not turn
it
on and off.
19.
GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded
surfaces. For example; pipes, radiators, ranges, refrigerator enclosures.
20.
REPLACEMENT PARTS. When servicing, use only identical replacement parts.
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle,
outlet, etc.) be sure the voltage supplied is the same as that specified on the
nameplate of the tool. A power source with voltage greater than that specified
for the tool can result in SERIOUS INJURY to the user
-
as well as damage to
the tool. If in doubt, DO NOT PLUG
IN
THE TOOL. Using a power source with
voltage less than the nameplate rating is harmful to the motor.
3
I
M
PO
RTA N T
Length
of
Cord (Feet)
AWG Size of Cord
SAFETY
25
50
100 150
18
18 18
16
IN STRU CTI
0
N
S
1.
SAVE THESE INSTRUCTIONS
-
This manual
contains important safety and operating instructions for battery charger.
2.
Before using battery charger, read all instructions and cautionary markings
on
(1
1
battery charger,
(2)
battery, and
(3)
product using battery.
3.
CAUTION
-
To reduce risk of injury, charge only MAKITA Battery
7000.
Other types of batteries may burst causing personal injury and damage.
4.
Do not expose charger to rain or snow.
5.
Use of an attachment not recommended or sold by the battery charger
manufacturer may result
in
a risk of fire, electric shock, or injury to persons.
6.
To reduce risk of damage to electric plug and cord, pull
by
plug rather than
cord when disconnecting charger.
7.
Make sure cord is located
so
that
it
will
not be stepped on, tripped over,
or otherwise subjected to damage or stress.
8.
An extension cord should not be used unless absolutely necessary. Use of
improper extension cord could result in a risk of fire and electric shock. If
extension cord must be used, make sure:
a. That pins on plug of extension cord are the same number, size, and shape
b. That extension cord is properly wired and in good electrical condition; and
c. That wire size is at least as large as the one specified in the table below.
TABLE
1
RECOMMENDED MINIMUM AWG SIZE FOR
EXTENSION CORDS FOR BATTERY CHARGERS
as those of plug on charger;
4
ADDITIONAL SAFETY RULES
FOR CHARGER
&
BATTERY CARTRIDGE
1.
Do
not charge Battery Cartridge when temperature is BELOW
10°C
(5OOF)
or ABOVE
4OoC (104OF).
2.
Do
not attempt to use a step-up transformer, an engine generator or DC power
3.
Do
not allow anything to cover or clog the charger vents.
4.
Do
not short the battery cartridge:
receptacle.
(11
Do
not touch the terminals with any conductive material.
(2)
Avoid storing battery cartridge in a container with other metal objects such
(3)
Do
not expose battery cartridge to water or rain.
as nails, coins, etc.
A battery short can cause a large current flow, overheating, possible burns
and even a breakdown.
5.
Do
not store the tool and Battery Cartridge in locations where the tempera-
6.
Do
not incinerate the Battery Cartridge even if
it
is severely damaged or is
ture may reach or exceed
5OoC (122OF).
completely worn out. The battery cartridge can explode in a fire.
ADDITIONAL SAFETY RULES
1.
Be aware that this tool is always in an operating condition, because
it
does
2.
Always be sure you have a firm footing.
3.
Hold the tool firmly.
4.
Keep hands away from rotating parts.
5.
When drilling into walls, floors or wherever "live" electrical wires may be
encountered,
DO
NOT
TOUCH ANY METAL PARTS
OF
THE
TOOL!
Hold the tool only by the insulated grasping surfaces to prevent electric shock
if you drill into a "live" wire.
not have to be plugged into an electrical outlet.
Be sure no one is below when using the tool in high locations.
6.
Do
not leave the tool running. Operate the tool only when hand-held.
7.
Do
not touch the drill bit or the workpiece immediately after operation: they
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
5
Loading...