Makita 6013BR, 6013BRK User Manual

1/2" DRILL Model 6013BR

Model 6013BRK

05-2003

Item Part No.

No. No. Used Description

1
2 942151-2 1 Spring Washer (Old)
3 325494-1 1 Spindle
4 254211-1 1 Key
5 285808-5 1 Bearing Retainer 25-36
6 211206-7 1 Ball Bearing 6202LLB
7 312989-3 1 Gear Housing Cover (Includes

8 212012-3 1 Needle Bearing 609

9 261008-1 1 Fibre Washer 6
10 226028-2 1 Gear Com. 7-41
11 211016-2 1 Ball Bearing 626LLB
12 263002-9 1 Rubber Pin 4
13 312988-5 1 Gear Housing (Includes Item 12)
14
15 257018-4 1 Ring 15
16 221261-1 1 Spur Gear 47
17 961054-1 1 Retaining Ring S-14
18 212003-4 1 Needle Bearing 810
19 253192-6 1 Flat Washer 14
20 263002-9 1 Rubber Pin 4
21 211033-2 1 Ball Bearing 608LB
22 681613-2 1 Insulation Washer
23

24 241622-9 1 Fan 62
25 213002-9 1 Dust Seal 8
26 211031-6 1 Ball Bearing 608LLB
27 263002-9 1 Rubber Pin 4
28
29 411487-5 1 Baffle Plate
30
31
32
33 911153-9
34 654018-9 2 Garter Spring
35
36 911133-5 2 P.H. Screw M4x18 (With Washer)
37 687002-9 1 Strain Relief
38 682502-4 1 Cord Guard 8-85
39 664013-1 1 Cord With Plug 2P-18-2.5
40

41 911153-9 4 P.H. Screw M4x28

*

*

*

*
*

*
*

*

*

1 Screw M6x22

Items 8, 18 & 27)

4 Screw M5x35

1 Armature Assy (Includes Items 21, 22 &

24 - 26)

2 Screw (With Washer & Bond)

1 Field Assy (With Items 34 & 43)
1 Switch
1 Switch Handle Cover (L)

P.H. Screw M4x28

*

4 Screw M5x28

1 Motor Housing Com. (With Items

20 & 59)

Item Part No.

No. No. Used Description

42 183109-4 1 D-Handle Cover (Set)[Old 411486-7 (L)]
43 654501-6 2 Solderless Connector P-1.25
44 953106-2 2 Rivet 0-5
45 191947-0 2 Carbon Brush CB-50
46 643550-8 2 Brush Holder Cap 5-8
47
48 183109-4 1 D-Handle (Set) [Old 411485-9 (R)]
49 931102-0 4 Hex Nut M4
50 931102-0
51 153110-3 1 Gear Shaft (B) (With Item 61)
52 962155-8 1 Retaining Ring R-37
53 156387-9 1 Gear Housing (With Item 62)
54 153109-8 1 Gear Shaft (A) (With Item 63)
55 962155-8 1 Retaining Ring R-37
56 325311-5 1 Sleeve
57 164301-1 1 Joint
58 921552-7 2 Hex Bolt M10x30
59 643556-6 2 Brush Holder 5-8
60 913206-0 2 Set Screw M5x8 (Old)
61 221314-6 1 Gear 14
62 212005-0 2 Needle Bearing 810
63 221313-8 1 Gear 21
64 421297-2 1 Dust Cover

65 343657-7 2 Retainer (Add)
100 654037-5 4 Insulated Eye Terminal FV1.25-M3
101 652250-9 4 Clamp Washer
102 652008-6 4 P.H. Screw M3.5x7
103 654509-0 2 -1 Closed End Connector 2-SD

Accessories

A01
A02

A03 152492-0 1 Side Handle 36 W/Flange

A04 781008-0 1 Wrench 17
A05 122177-2 1 Right Angle Attachment

A06 824440-6 1 Plastic Carrying Case (Includes Items
A07 A00181-7 1 Plastic Black Handle

*

*
*

273404-1 1 Side Handle 37

1 Switch Handle (R) (With Item 50)

Hex Nut M4

*

*

1 Drill Chuck
1 Chuck Key

(Assembled Items 51-58 & A04)
A07 & A08)

SERVICE CHANGES

1. Change on Drill Chuck & Chuck Key

Item No. Description Type 1 Type 2 Type 3 Type 4

1
A01 Drill Chuck 763047-2 763047-2A 763047-2B (No Longer Available) 763047-2A
A02 Chuck Key 798341-3 (763411-7) 763411-7A 763411-7B (No Longer Available) 763411-7A

Above parts are completely interchangeable as a set.
Type 2 Screw can be used with Type 1 Drill Chuck.
Type 3 & 4 (or Type 2) are interchangeable by themselves.
Type 4 Drill Chuck and Chuck Key comes with Serial No. 74336.

2 Model 6013BR
2 Model 6013BRK

(-) Flat Head Screw M6x22

251425-3 251441-5

SEE SERVICE CHANGES

*