Makita 2703 User Manual

8-1/4" TABLE SAW Model 2702(MCA)
10" TABLE SAW Model 2703(MCA)

11-2001

2 Model 2702
2 Model 2703

Item Part No.
No. No. Used Description

1 344536-2 1 Gear Housing Plate
2 911208-0 1 P.H. Screw M5x10
3 416340-0 2 Guide Bar Retainer
4 266040-0 4 Tapping Screw CT 4x25
5 323736-7 2 Guide Bar
6 159999-7 1 Gear Housing Com. (Includes

263005-3 - Rubber Pin 6 & 951157-9

- Spring Pin 5-16 & Item 21)

7 168313-6 1 Safety Guide (2702)(Includes

Torsion Spring 17- 231541-7,
Torsion Spring 17 - 231542-5, Hex
Bolt M6X50 -265462-1, Hex Nut

- 931302-2 & Flat Washer 6 ­941151-9 X 2)

168309-7 1 Safety Guide (2703)(Includes

Torsion Spring 17- 231541-7,
Torsion Spring 17 - 231542-5, Hex
Bolt M6X50 -265462-1, Hex Nut

- 931302-2 & Flat Washer 6 ­941151-9 X 2)

8 265391-8 2 (+) Hex Bolt M6x16

9 165206-8 1 Stay
10 911383-2 4 P.H. Screw M6x60
11 344545-1 1 Pressure Plate
12 921431-9 2 Hex Bolt M8x20
13 265995-6 2 Tapping Screw 4x18
14 687054-0 1 Strain Relief
15 416341-8 1 Cover
16 265995-6 2 Tapping Screw 4X18
17 266040-0 4 Tapping Screw CT 4x25
18 416340-0 2 Guide Bar Retainer
19 266040-0 2 Tapping Screw CT 4x25
20 961016-9 1 Stop Ring E-10
21 212121-8 1 Needle Bearing 1210
22 226499-3 1 Helical Gear 42
23 267176-8 1 Flat Washer 17
24 267170-0 1 Flat Washer 34
25 211256-2 1 Ball Bearing 6203LLB
26 316933-2 1 Bearing Box
27 153264-6 1 Spindle Com. (Includes 323738-3

- Spindle & Items 22-25)
28 224333-1 1 Flange 53
30 224347-0 1 Outer Flange 53
31 252155-9 1 Hex Nut M12-19
32 911233-1 4 P.H. Screw M5x20
33 322968-3 1 Screw Bar
34 416339-5 1 Screw Bar Retainer
35 941302-4 1 Flat Washer 12
36 951116-3 1 Spring Pin 4-20
37 226747-0 1 Straight Bevel Gear
38 253024-7 1 Flat Washer 10
39 231315-6 1 Compression Spring 14
40 322967-5 1 Lock Lever Shaft
41 922243-3 1 Hex Socket Head Bolt M5x25
42 272237-1 1 Lever 90
43 266034-5 2 Tapping Screw CT 4x16
44 253143-9 1 Flat Washer 12
45 213107-5 1 O Ring 12
46 214114-1 1 Plane Bearing 12
47 344544-3 1 Stay
48 344543-5 1 Pointer
49 922103-9 1 Hex Socket Head Bolt M4x6
50 951116-3 1 Spring Pin 4-20
51 911218-7 1 P.H. Screw M5x14

Item Part No.
No. No. Used Description

52 268031-7 1 Pin 8
53 271408-7 1 Knob 20
54 271071-6 1 Handle 120
55 323735-9 1 Handle Shaft
56 344581-7 1 Cap 92
57 271070-8 1 Handle 100
58 226747-0 1 Straight Bevel Gear
59 951116-3 1 Spring Pin 4-20
60 941302-4 1 Flat Washer 12
61 931502-4 1 Hex Nut M10
62 213423-5 1 O Ring 30
63 253792-2 1 Flat Washer 26
64 211206-7 1 Ball Bearing 6202LLB
65 253147-1 1 Flat Washer 15
66 240003-4 1 Fan 80
67 516761-7 1 Armature Assy (Includes 64-66,

68 & 69)
68 681640-9 1 Insulation Washer
69 211061-7 1 Ball Bearing 6000LLB
70 416331-1 1 Baffle Plate
71 266029-8 2 Tapping Screw Flange PT5x65
72 596181-1 1 Field Assy (Includes Items 123 & 124)
73 159998-9 1 Motor Housing Com. (Includes

2 X 643660-1 - Brush Holder 6.5-13.5)
74 181047-4 2 Carbon Brush CB-154 (2pcs/Set)
75 643650-4 2 Brush Holder Cap 6.5-13.5
76 266034-5 2 Tapping Screw CT 4x16
77 416439-1 1 Dust Guide
78 317382-6 1 Frame* (Old 316931-6)
79 344519-2 1 Frame Cover
80 266035-3 4 Tapping Screw Bind CT 5x12
81 344529-9 2 Slide Seat
82 251308-7 1 (+) P.H. Screw M4x10
83 687049-3 1 Strain Relief
84 911208-0 2 P.H. Screw M5x10
85 416333-7 1 Rack Plate
86 344518-4 1 Plate
87 911323-0 2 P.H. Screw M6x16
88 317010-3 1 Adjust Block
89 265460-5 2 Hex Bolt M6x20
90 232174-1 2 Leaf Spring
91 416332-9 2 Frame Retainer
92 911333-7 4 P.H. Screw M6x20
93 231240-1 1 Compression Spring 7
94 416375-1 1 Cap
95 664080-6 1 Cord #14-3-0.86
96 687054-0 1 Strain Relief
97 265995-6 2 Tapping Screw 4x18
98 416335-3 1 Switch Box
99 265995-6 2 Tapping Screw 4x18

100 687052-4 1 Strain Relief
101 416334-5 1 Switch Base
102 651567-7 1 Switch
103 416377-7 1 Slide Pin
104 416376-9 1 Switch Button
105 265999-8 3 Tapping Screw, Flange 4x25
106 344547-7 1 Plate
107 911323-0 2 P.H. Screw M6x16

108 316934-0 1 Center Cover (2702)

316935-8 1 Center Cover (2703)

109 816332-3 1 Scale Plate L
110 251308-7 2 (+) P.H. Screw M4x10
111 816331-5 1 Scale Plate R
112 251308-7 2 (+) P.H. Screw M4x10

3 Model 2702
3 Model 2703

Item Part No.
No. No. Used Description

113
115 664463-0 1 Cord W/Plug 2P-14-2.5M
116 682504-0 1 Cord Guard 10-85
117 265995-6 2 Tapping Screw 4x18
118 687052-4 1 Strain Relief
119 286202-4 4 Cap 20
120 150824-5 1 Base Com. (Includes 810917-7 -

121 911344-2 4 P.H. Screw M6x25
122 253052-2 1 Flat Washer 12
123 654020-2 2 Garter Spring
124 654502-4 2 Connector Par Splice (Old 654553-7)
125 163024-8 1 Guide Plate
126 271401-1 1 Knob 32
127 253047-5 1 Flat Washer 6
129 257060-5 1 Ring 15.8
130 192693-8 1 Dado Flange Set (Includes Items

131 224333-1 1 Inner flange 53
132 224347-0 1 Outer Flange 53
133 252155-9 1 Hex Nut M12-19
134 344530-4 1 Hook Plate
135 266175-7 1 C.H. Square Neck Bolt M5x590
136 416342-6 1 Ruler Top
137 165205-0 1 Ruler
138 265391-8 2 Hex Bolt M6X16
139 316936-6 1 Rule Holder
140 251308-7 1 P.H. Screw M4X10
141 232175-9 1 Leaf Spring
142 344531-2 1 Pressure Plate
143 256258-1 1 Pin 6
144 256259-9 1 Pin 8
145 323739-1 1 Adjust Nut
146 344580-9 1 Cam
147 152490-4 1 Grip 36
148 233228-7 1 Compression Spring 10
200 654558-7 6 Insulated Connector

*

1 Table

Caution Label & 816776-7 - Bevel
Scale Label)

A, B, C & D shown in diagram below)

Item Part No.
No. No. Used Description

201 654180-0 5 Receptacle

Accessories

A01 122556-4 1 Ruler Assy (Rip Fence)(Includes
A02 781027-6 1 Wrench 19

A03 782021-1 1 Wrench 13-22
A04 783009-4 1 Holder Cap Opener

A05 - - - - - 1 8-1/4" C.T. Saw Blade

- - - - - 1 10" C.T. Saw Blade

A06 122555-6 1 Angle Rule Assy (Mitre Gauge)

A07 191686-A 1 Makita Safety Glasses
A08 STEX122275 1 Joint (For 406)

A09 191543-4 1 Dado Head Set (2702)

191794-9 1 Dado Head Set (2703)

A10 192680-7 1 Table Saw Stand (Old 122558-0)
A11 192797-6 1 Sub Table (R)
A12 192798-4 1 Sub Table (L)
A13 122731-A 1 Porta Table (Picture Not Available)
A14 224263-6 1 Dado Outer Flange (2702) (For

A15 257137-6 1-3 Ring 15 (2703) (For Dadoing) (For

A16 317061-6 1 Dado Table Insert (Use with curttng
A17 192800-3 1 Joint 55 Set (For 410)

A18 416772-1 1 Push Stick

SERVICE NOTE

Instructions for installing the Dado Head Set please refer to the Instruction
Manual for this Tool.

Items 134 - 148)

(See Catalogue for Details)
(See Catalogue for Details)

(Includes Items 125 - 127)

Dadoing 5/16”, 3/8”, 7/16” or ½”)

Cutting groove ¼”, 5/16”, 3/8”, 7/16”,
Or ½”)

grooves 5/16”, 3/8”, 7/16” or ½”)

SEE SERVICE CHANGES

*

Item No. Part No. Description

A 931603-8

133 252155-9

B 224356-9

C 267183-1
132 224347-0
A09 191543-4 (2702)

Dado Hex Nut M12
Hex Nut M12-19
Dado Outer Flange 30
Flat Washer 16
Outer Flange 53
Dado Head Set

191794-9 (2703)

D 253723-1
131 224333-1

27 153264-6

Washer 16
Inner Flange 53
Spindle Com.

To receive Items A, B, C & D order Item 130 on the Breakdown.

4 Model 2702
4 Model 2703

SERVICE CHANGES

1. Addition of Breakdown of the Ruller Assy Item # A01 - P/N 122556-4

Item No. Description Type 1

134
135 C.H. Square Neck Bolt M5x590 266175-7
136 Ruller Top 416342-6
137
138
139 Rule Holder 316936-6
140 P.H. Screw M4X10 251308-7
141
142
143 Pin 6 256258-1
144 Pin 8 256259-9
145
146
147 Grip 26 152490-4
148 Compression Spring 10 233228-7

Hook Plate

Ruler
Hex Bolt M6X16

Leaf spring
Pressure Plate

Adjust Nut
Cam

344530-4

165205-0
265391-8

232175-9
344531-2

323739-1
344580-9

5 Model 2702
5 Model 2703

2. Change on Table and Frame.

Item No. Description Type 1 Type 2

78

Serial # for Frame 2702 ~ 18833A 18834A ~

113

Serial # for Table

Type 2 Table cannot be used with Type 1 Frame. Always use Type 1 Table for Type 1 Frame.
Type 2 Frame can be installed on Type 1 or Type 2 Table.

Type 2 Table and Frame changes

Frame

2703
Table
2702
2703 ~ 41212A 41213A ~

316931-6 317382-6

~ 40516A 40517A ~
316930-8 317383-4
~ 19071A 19072A ~

6 Model 2702
6 Model 2703