![](/html/b2/b227/b227bd090c357b660c987e1695a322b13a7e596dd50aa479722efcce17f6fd5d/bg2.png)
JHT Operator’s Manual Rev 0117 Page 2 of 17
CONTENTS
- General Safety Instructions
- Product Description and Specifications
A. BLOCK SETS BREAKDOWN
B. HAZARD ASSESSMENT
C. SALES AND SPARES
![](/html/b2/b227/b227bd090c357b660c987e1695a322b13a7e596dd50aa479722efcce17f6fd5d/bg3.png)
JHT Operator’s Manual Rev 0117 Page 3 of 17
ABOUT THIS MANUAL
This manual is designed to provide the user with the information
required to operate and maintain the Jackhammer Trolley
correctly and safely.
Key Terms
READ CAREFULLY – refers to important
information that should be paid careful
attention.
CAUTION - indicates a situation that may cause
injury or damage to the machine if the user does
not follow the instructions.
WARNING – indicates a situation that may
cause injury or death if the user does not follow
the instructions correctly.
DANGER – indicates a situation that will cause
injury or death if the user does not follow the
instructions as written.
PROHIBITED – identifies actions that should
never be carried out by any one interacting
with the machine.
Disclaimer
MAKINEX, and its affiliates, takes no responsibility for any
damage, injury or death resulting from the incorrect or unsafe
use of this machine. Use of this machine should be undertaken
by competent persons only. It is the operators’ responsibility to
ensure that the following safety procedures are followed.
![](/html/b2/b227/b227bd090c357b660c987e1695a322b13a7e596dd50aa479722efcce17f6fd5d/bg4.png)
JHT Operator’s Manual Rev 0117 Page 4 of 17
PRODUCT INFORMATION
General Safety Instructions
Throughout this document there are several safety warnings.
The user should read through this complete document before
using the Jackhammer Trolley.
Ensure you read all information contained in
this manual before using the Jackhammer
Trolley
Ensure you read the manual and safety
instructions for the Jackhammer and other
components that are part of this unit. See
Appendix for more information
Always wear the recommended personal
protective equipment
Never expose the machine to moisture or rain
Safety Stickers
There is a safety and information panel provided on the front of
the Jackhammer Trolley to alert the user of potential safety
risks/hazards. Please read and adhere to all instructions on the
Unit.
![](/html/b2/b227/b227bd090c357b660c987e1695a322b13a7e596dd50aa479722efcce17f6fd5d/bg5.png)
JHT Operator’s Manual Rev 0117 Page 5 of 17
It is forbidden to remove any safety or
instructional stickers or panels from the
Jackhammer Trolley
Read all safety and instructional stickers
displayed on each component of the
Jackhammer Trolley
![](/html/b2/b227/b227bd090c357b660c987e1695a322b13a7e596dd50aa479722efcce17f6fd5d/bg6.png)
JHT Operator’s Manual Rev 0117 Page 6 of 17
Warranty
WARRANTY: (Ex-factory/ Reseller premise)
MAKINEX warrants to the original purchaser:
• MAKINEX provides a Limited One Year Warranty that
applies to Jackhammer Trolley only (this excludes the
Jackhammer and any other attachments and consumables).
• Any unauthorized repair or part replacement will void
warranty. Refer to manufacturer for all repairs.
• Regular service must be carried out by competent persons
only; failure to comply will void warranty.
• Jackhammer (where purchased) is to be covered by original
manufacturer. Please refer to their manual for more
information.
Transportation charges on product submitted for repair or replacement
under this warranty are the sole responsibility of the purchaser. This
warranty only applies to the original purchaser and is not transferable.
Warranty Exclusions:
• Warranty does not cover wear and tear, breakage, misuse or
theft.
• Warranty does not cover consumables (e.g. blades). Warranty
does not cover attachments (e.g. Shanks and Tile Smasher
heads).
• Warranty will not apply to parts and/or labour if this
Jackhammer Trolley is deemed to be misused, neglected,
installed improperly or set up incorrectly.
• Cosmetic defects such as decals and coating.
• Failures due to acts of God and other force majeure events
beyond the manufacturer’s control.
• Problems caused by parts that are not original MAKINEX parts.