MAKERFACTORY M5Stack Potentiometer User guide [ml]
BN 2108270
M5Stack Potentiometer
EN Quick Instru ctions
Version: 1
Delivery Content
l Product
l Grove c able
Development Resources
Development resources and additional product information are available from:
https: //www.conrad.de/ https: //docs.makerfactory.io/
Description
The product integrates a 10 kΩ potentiometer.
Use the product for continuous adjustment, such as volume, brightness, or motor speed.
The product connects to Port B on the M5 C ore (GPIO 26/36). The M5
Core captures the output voltage and converts it into a digital signal.
Features
l Grove int erf ace
l Supports UIF low and Arduino®
l Two Lego compatible holes
1
Pinout / Pin Map
M5Core GPIO36 GPIO26 5V GND
Product Sensor Pin 5V GND
Specifications
Input Voltage 5 V/DC
Output voltage 0 - 2500 mV
Dimensions (approx.)
Weight (approx.) 5.6 g
32.2 x 24.2 x 21.7 mm
(W x D x H )
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in
accordance with applicable regulatory guidelines.
You thus fulfill your s tatutory obligations and contribute to the protection of the environment.
Legal Notice
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method,
e.g. photocopy, microfilming, or the capture in electronic data processing syst ems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE.
2
Loading...