MAKERFACTORY M5Stack Plus-Modul User guide [ml]

BN 2108264
M5Stack Plus-Modul
DE Kurzanleitun g
Version: 2
Lieferumfang
l Modul
Ressourcen für Entwickler
Ressourcen für Entwickler und zusätzliche Informationen zum Pro­dukt sind verfügbar über:
https://www.conrad.de/ https://docs.makerfactory.io/
Beschreibung
Das Modul besteht aus den folgenden Komponenten: l LiPo-Akku (500 mAh) l Programmierbares Pot entiometer l IR-Sender l Erweitert Port B (GPIO) und Port C (UART) des M5 Core. l Freie Lötstellen für Mikrofon Das Modul basiert auf einem MEGA328 und kommuniziert über I2C
(Adresse: 0x62).
Sicherheitshinweise
l Der Akku ist im Produkt fest eingebaut , Sie können den Akk u
nicht wec hseln.
1
l Besc hädigen Sie den Akku niemals. Durch Beschädigung der
Hülle des Akk us besteht Explosions- und Brandgefahr! Die Hülle des LiPo-Akkus besteht nicht wie bei herköm mlichen Bat­terien/Akkus (z .B. AA- oder AAA-Baugröße) aus einem dünnen Blech, sondern nur aus einer empfindlichen Kunst stoff folie.
l Schließen Sie die Kontakte/ Anschlüss e des Akkus niemals
kurz . Werfen Sie den Akku bzw. das Produkt nicht ins Feuer. Es besteht Explosions- und Brandgef ahr!
l Laden Sie den Akku regelmäß ig nach, auch wenn das Produkt
nicht benötigt wird. Durc h die verwendet e Akkut ec hnik ist
dabei keine vorherige Entladung des Akk us erforderlich. l Laden Sie den Akku des Produkts niemals unbeauf sichtigt. l Platzieren Sie das Produkt beim Ladevorgang auf einer hit-
zeunem pfindlic hen Oberfläche. Eine gewis se Erwärmung beim
Ladevorgang ist normal.
Technische Daten
Micro-Controller MEGA328
Akku/Batterie LiPo 3,7 V / 500 mAh
Protokoll I2C (Adresse: 0x62)
Abmessungen (ca.) 54 x 54 x 13 mm (B x T x H)
Gewicht (ca.) 20 g
Entsorgung
Elektronische Geräte sind Wertstoff e und gehören nicht in den Hausmüll.
Entsorgen Sie das Produkt am Ende seiner Lebensdauer gemäß den geltenden gesetzlichen Bestimmungen.
Sie erfüllen damit die gesetzlichen Verpflichtungen und leisten Ihren Beitrag zum Umweltschutz.
2
Impressum
Dies ist eine Publikation der Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
Alle Rechte einschließlich Übersetzung vorbehalten. Reproduktionen jeder Art, z. B. Fotokopie, Mikroverfilmung, oder die Erfassung in elek­tronischen Datenverarbeitungsanlagen, bedürfen der schriftlichen Genehmigung des Herausgebers. Nachdruck, auch auszugsweise, verboten.
Die Publikation entspricht dem technischen Stand bei Drucklegung. Copyright 2020 by Conrad Electronic SE.
3
BN 2108264
M5Stack Plus Module
EN Quick Instru ctions
Version: 2
Delivery Content
l Module
Development Resources
Development resources and additional product information are avail­able from:
https: //www.conrad.de/ https: //docs.makerfactory.io/
Description
The module comes with the following built-in components:
l LiPo batt ery (500 mAh)
l Programmable Gear Potentiometer
l IR trans mitt er
l Ext ends Port B (GPIO) and Port C (UART ) of t he M5 core
l Mic rophone soldering pad
The module is powered by a MEGA328 and communicates through I2C (Address: 0x62).
Safety Instructions
l The rec hargeable batt ery is permanently built int o the produc t
and cannot be replaced.
1
l Nev er damage t he rechargeable bat tery. Dam aging the casing
of the rechargeable battery might cause an explosion or a fire!
Unlike convent ional batt eries /rechargeable bat teries (e.g. AA
or AAA type), t he cas ing of the LiPo rechargeable bat tery does
not consist of a thin sheet but rat her a sens it ive plast ic film
only.
l Nev er short-c irc uit the contact s of the rec hargeable batt ery .
Do not throw the bat tery or the product into fire. There is a
danger of f ire and explosion!
l Charge the rechargeable bat tery regularly, even if you are not
using the produc t. Due t o the rec hargeable batt ery tec hnology
being used, you do not need to discharge the rechargeable bat-
tery first .
l Nev er charge the rechargeable bat tery of the produc t unat-
tended.
l When charging, place the product on a surf ac e that is not
heat-sens it ive. I t is normal that a cert ain amount of heat is
generat ed during charging.
Specifications
Micro controller MEGA328
Battery LiPo 3.7 V / 500 mAh
Protocol I2C (Address: 0x62)
Dimensions (approx.) 54 x 54 x 13 mm (W x D x H )
Weight (approx.) 20 g
Disposal
Electronic devices are recyclable waste and must not be dis­posed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the pro­tection of the environment.
2
Legal Notice
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D­92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data pro­cessing syst ems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
3
Loading...