MAKERFACTORY M5Stack Joystick Module User guide [ml]

BN 2108295
M5Stack Joystick Module
EN Quick Instru ctions
Version: 1
Delivery Content
l Product
l Grove c able
Development Resources
https: //www.conrad.de/ https: //docs.makerfactory.io/
Description
This product is a joystick. The x-axis and the y-axis are two 10 kΩ potentiometers which control 2D movement by generating analog sig­nals which you can use for position detection.
The joyst ick also has a push button that can be used for special applic­ations.
The product integrates a MEGA328. The x-axis is connected to pin A0 of the MEGA328, the y-axis to pin A1, and the z-axis (button) to pin A2.
The product connects to Port A on the M5Core and communicates via I2C (Address: 0x52).
1
Features
l Supports UIF low (Block ly , Py thon), Arduino®
l Two Lego compatible holes
Applications
l Game controller
l Robot remot e control
Pinout / Pin Map
M5Core GPIO22 GPIO21 5V GND
Product SCL SDA 5V GND
Specifications
Input Voltage 5 V/DC
x-axis: 10 - 250
y-axis: 10 - 250
Output Value
Protocol I2C (Address: 0x52)
Dimensions (approx.)
Weight (approx.) 11.4 g
z-axis (button):
0 (released)
1 (pressed)
48.2 x 24.2 x 22.5 mm (W x D x H )
Disposal
Electronic devices are recyclable waste and must not be dis­posed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory guidelines.
You thus fulfill your s tatutory obligations and contribute to the pro­tection of the environment.
2
Legal Notice
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D­92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data pro­cessing syst ems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE.
3
BN 2108295
M5Stack Joystick-Modul
DE Kurzanleitun g
Version: 1
Lieferumfang
l Produkt l Grove Kabel
Ressourcen für Entwickler
Ressourcen für Entwickler und zusätzliche Informationen zum Pro­dukt sind verfügbar über:
https://www.conrad.de/ https://docs.makerfactory.io/
Beschreibung
Das Produkt ist ein Joystick. Die x-Achse und die y-Achse sind zwei 10 kΩ Potentiometer, welche die 2D-Bewegung steuern, indem sie analoge Signale erzeugen, die Sie zur Positionserfassung verwenden können.
Der Joystick verfügt auch über eine Drucktaste, die für spezielle Anwendungen verwendet werden kann.
Das Produkt integriert einen MEGA328. Die x-Achse ist mit dem Pin A0 des MEGA328 verbunden, die y-Achse mit Pin A1 und die z-Achse (Drucktaste) mit Pin A2.
Das Produkt wird an Port A am M5Core angeschlossen und kom­muniziert über I2C (Adresse 0x52).
1
Produktmerkmale
l Unterstüt zt UIF low (Blockly , Python), Arduino® l Zwei Lego kompatible Löcher
Anwendungen
l Game Controller l Robot er-F ernbedienung
Pinout / Pin Map
M5Core GPIO22 GPIO21 5V GND
Produkt SCL SDA 5V GND
Technische Daten
Eingangsspannung 5 V/DC
x-Achse: 10 - 250 y-Achse: 10 - 250
Ausgabewert
Protokoll I2C (Adresse: 0x52)
Abmessungen (ca.)
Gewicht (ca.) 11,4 g
z-Achse (Taste): 0 (nicht gedrückt) 1 (gedrückt)
48,2 x 24,2 x 22,5 mm (B x T x H)
Entsorgung
Elektronische Geräte sind Wertstoffe und gehören nicht in den Hausmüll.
Entsorgen Sie das Produkt am Ende seiner Lebensdauer gemäß den geltenden gesetzlichen Bestimmungen.
Sie erfüllen damit die gesetzlichen Verpflichtungen und leisten Ihren Beitrag zum Umweltschutz.
2
Impressum
Dies ist eine Publikation der Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
Alle Rechte einschließlich Übersetzung vorbehalten. Reproduktionen jeder Art, z. B. Fotokopie, Mikroverfilmung, oder die Erfassung in elek­tronischen Datenverarbeitungsanlagen, bedürfen der schriftlichen Genehmigung des Herausgebers. Nachdruck, auch auszugsweise, verboten.
Die Publikation entspricht dem technischen Stand bei Drucklegung. Copyright 2019 by Conrad Electronic SE.
3
Loading...