MAKERFACTORY M5Stack Hexagonal NeoPixel LED Board User guide [ml]
BN 2108287
M5Stack Hexagonal NeoPixel LED Board
EN Quick Instru ctions
Version: 1
Delivery Content
l Product
l Grove c able
Development Resources
Development resources and additional product information are available from:
https: //www.conrad.de/ https: //docs.makerfactory.io/
Safety Instructions
Attention, LED l ight: Do not look directly into the
LED light! Do not look into the beam directly or with
optical instruments!
Description
The product is a hexagonal RGB LED panel. It features a total of 37
RGB LEDs. It has an input and output port for chaining.
The product can connect to Grove Port A, B, or C on t he M5Core.
Refer to the Pinout section in t his document for details.
Note: you are not required to switc h resistors into your circuit.
1
Observe below diagram when you create your project.
Features
l 37 LEDs
l Supports UIF low (Block ly , Py thon), Arduino®
Pinout / Pin Map
Below tables show the c onnection details when c onnecting to Port A,
B, or C on the M5Core.
Port A GPIO22 GPIO21 5V GND
Product HEX Pin 5V GND
Port B GPIO36 GPIO26 5V GND
Product HEX Pin 5V GND
Port C GPIO16 GPIO17 5V GND
Product HEX Pin 5V GND
2
Loading...